Skip to the content
12345678910111213141516

74LS169PC

Texas InstrumentsExtended

0℃~+70℃ 1 4 4.75V~5.25V 74LS Divide-by-2 Programmable divide ratio、Cascade counter、Synchronous counting、Multi-mode counting Rising Edge Synchronous Synchronous Up Counter、Down Counter PDIP-16 Counters, Dividers

Part id
ti/74LS169PC
Category
Counters, Dividers
Package
PDIP-16
Pins
5
In stock
0 at JLCPCB (C3828201)
Used on
8 open-source boards

Overview

The 74LS169PC is a counters, Divider made by Texas Instruments in a PDIP-16 package with 16 pins. 0℃~+70℃ 1 4 4.75V~5.25V 74LS Divide-by-2 Programmable divide ratio、Cascade counter、Synchronous counting、Multi-mode counting Rising Edge Synchronous Synchronous Up Counter、Down Counter PDIP-16 Counters, Dividers.

PCBKit's library has its KiCad symbol (74xx:74LS169, from KiCad's library) and its footprint (Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C3828201). 8 open-source boards in 6 repositories on GitHub use it.

Symbol

U/D1CP2P03P14P25P36CEP7GND8PE9CET10Q311Q212Q113Q014TC15VCC16
74xx:74LS169From KiCad's library

Footprint

12345678910111213141516
Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

16
The pins of the 74LS169PC
PinNameType
1U/DInput
2CPInput
3P0Input
4P1Input
5P2Input
6P3Input
7CEPInput
8GNDPower in
9PEInput
10CETInput
11Q3Output
12Q2Output
13Q1Output
14Q0Output
15TCOutput
16VCCPower in

Open-source boards using it

8
  • 4 layers298.9 × 270 mmDino v0 0 2, the printed circuit board in 3D

    Dino v0 0 2

    robertrico/dino-homebrew

    A perfboard with the bus edge and the slot decode every DINO card repeats. Plug it into any of J1-J8 on the Rev 1.0 mainboard, pick the slot with one shunt, bodge the card on the grid.

    239 parts
  • 2 layers101.5 × 66.5 mmSp register, the printed circuit board in 3D

    Sp register

    lorenzonotaro/lncpu

    LNCPU is a design for a hobby 8-bit processor.

    12 parts8
  • 2 layers206.4 × 137.5 mmRegisters, the printed circuit board in 3D

    Registers

    tergav17/RDP-9

    Homebrew TTL ISA-compatible PDP-9 clone

    59 parts6
  • 2 layers235 × 137.5 mmTTY Clock, the printed circuit board in 3D

    TTY Clock

    tergav17/RDP-9

    Homebrew TTL ISA-compatible PDP-9 clone

    120 parts6
  • 2 layers99.1 × 55.9 mmLed board 00, the printed circuit board in 3D

    Led board 00

    dzavalishin/hardware

    Misc smart house hardware

    55 parts3
  • 4 layers82 × 67.1 mmAudio, the printed circuit board in 3D

    Audio

    Trilobyte-CPU/8-bit-computer

    A DIY 8-bit computer built mostly with discrete logic chips

    31 parts2
  • 4 layers82.5 × 49.8 mmInterrupts, the printed circuit board in 3D

    Interrupts

    Trilobyte-CPU/8-bit-computer

    A DIY 8-bit computer built mostly with discrete logic chips

    60 parts2
  • 4 layers114.3 × 90.3 mmAddress register bank, the printed circuit board in 3D

    Address register bank

    lafehubert/electronics

    A place for info and code relating to my electronics projects

    99 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 74LS169PC?

Yes. The symbol is 74xx:74LS169 and the footprint Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 74LS169PC?

PDIP-16, with 16 pins. Its footprint is drawn on this page.

Where is the 74LS169PC datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the 74LS169PC?

JLCPCB lists it as part C3828201, with 0 in stock; the sellers' links on this page open their listings.

What can replace the 74LS169PC?

Parts like it in the library: the CD4017BED by GREENMICRO, the CD4017CN by HGSEMI, the CD4518BE by HGSEMI and the CD4520BE by HGSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 74LS169PC?

8 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.