Overview
The SE868-V3 is an uncategorised made by Telit in a PQFN32 package with 32 pins. Positioning GNSS Module.
PCBKit's library has its KiCad symbol (Analog & Interface:SE868-V3, from CERN's library) and its footprint (ICs And Semiconductors SMD:TELIT_SE868-V3, from CERN's library), ready for a KiCad board.
Symbol
Footprint
Pinout
32| Pin | Name | Type |
|---|---|---|
| 1 | GND | Power in |
| 2 | NC | Passive |
| 3 | NC | Passive |
| 4 | GND | Power in |
| 5 | SYS-ON | Output |
| 6 | RSVD | Passive |
| 7 | GND | Power in |
| 8 | RF_IN | Input |
| 9 | GND | Power in |
| 10 | TX | Input/output |
| 11 | RX | Input/output |
| 12 | RESET | Input |
| 13 | ON-OFF | Input |
| 14 | NC | Passive |
| 15 | GPIO4 | Input/output |
| 16 | NC | Passive |
| 17 | BOOT-SEL | Input |
| 18 | GPIO2 | Input/output |
| 19 | NC | Passive |
| 20 | NC | Passive |
| 21 | GND | Power in |
| 22 | NC | Passive |
| 23 | GPIO6 | Input/output |
| 24 | GPIO7 | Input/output |
| 25 | VDD18 | Power in |
| 26 | GPIO8 | Input/output |
| 27 | VDD18 | Power in |
| 28 | TM | Output |
| 29 | GPIO1 | Input/output |
| 30 | GPIO0 | Input/output |
| 31 | GND | Power in |
| 32 | VDD18 | Power in |
Questions
Is there a KiCad symbol and footprint for the SE868-V3?
Yes. The symbol is Analog & Interface:SE868-V3 and the footprint ICs And Semiconductors SMD:TELIT_SE868-V3, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the SE868-V3?
PQFN32, with 32 pins. Its footprint is drawn on this page.