Skip to the content
12345

TPS7A2018PDBVR-TP

TECH PUBLICExtended

-40℃~+85℃ 1 1.8V 280uV@(300mA) 2uA 300mA 5.5V 75dB@(1kHz) Fixed Over Current Protection、Enable、Thermal Shutdown Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
tech-public/TPS7A2018PDBVR-TP
Category
Uncategorised
Package
SOT-23-5
Pins
5
In stock
1,843 at JLCPCB (C49452005)
Used on
11 open-source boards

Overview

The TPS7A2018PDBVR-TP is an uncategorised made by TECH PUBLIC in a SOT-23-5 package with 5 pins. -40℃~+85℃ 1 1.8V 280uV@(300mA) 2uA 300mA 5.5V 75dB@(1kHz) Fixed Over Current Protection、Enable、Thermal Shutdown Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:TPS7A20xxxDBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 1,843 are in stock at JLCPCB (part C49452005). 11 open-source boards in 10 repositories on GitHub use it.

Symbol

1IN2GND3EN5OUT
Regulator_Linear:TPS7A20xxxDBVFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the TPS7A2018PDBVR-TP
PinNameType
1INPower in
2GNDPower in
3ENInput
4NCNot connected
5OUTPower out

Open-source boards using it

11See all 11
  • 4 layers66 × 46 mmRadar1, the printed circuit board in 3D

    Radar1

    HearnChristian/k-band-fmcw-radar

    24 GHz FMCW radar front-end in KiCad (WIP): ADF4159 chirp synth, BGT24LTR11 transceiver, custom Marki AMM-8211PSM driver-amp symbol/footprint, OPA1656 IF, ADS8353 ADC, FT2232H USB.

    99 parts3
  • 4 layers100 × 85 mmPAL sign, the printed circuit board in 3D

    PAL sign

    PE5PVB/PAL-sign

    Advanced CVBS PAL video generator

    115 parts2GPL-3.0
  • 2 layers70.7 × 70.7 mmWhistler mic array, the printed circuit board in 3D

    Whistler mic array

    ccc909/Whistler

    Open-source 16-channel USB MEMS microphone array: KiCad PCB design, XMOS XU316 (xcore.ai) USB Audio Class 2 firmware with DFU, BOM and JLCPCB-ready production files. CERN-OHL-S.

    96 parts1CERN-OHL-S-2.0
  • 4 layers60 × 60 mmStillpoint, the printed circuit board in 3D

    Stillpoint

    techmiguel/stillpoint

    Open-hardware 60 GHz radar ceiling sensor: presence & fall detection without a camera. Matter over Thread, KiCad 4-layer Ø60 mm board.

    95 parts1CERN-OHL-S-2.0
  • 4 layers117.6 × 83 mmNile test chip pcb, the printed circuit board in 3D

    Nile test chip pcb

    Ash-tronix/nile_test_chip_pcb

    KiCad PCB design files to support the Ashtronix® Nile test chip.

    177 parts
  • 4 layers100 × 60 mmWork after r3, the printed circuit board in 3D

    Work after r3

    cfbird/usb3-sdr

    USB3 direct-sampling HF SDR: AD9649 ADC -> ECP5 FPGA DDC -> FT601 USB 3. KiCad 9 + Verilog, co-designed by Claude and Gemini (AGY).

    231 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS7A2018PDBVR-TP?

Yes. The symbol is Regulator_Linear:TPS7A20xxxDBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS7A2018PDBVR-TP?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the TPS7A2018PDBVR-TP datasheet?

TECH PUBLIC publishes it: the Datasheet link on this page opens it.

Where can I order the TPS7A2018PDBVR-TP?

JLCPCB lists it as part C49452005, with 1,843 in stock; the sellers' links on this page open their listings.

What can replace the TPS7A2018PDBVR-TP?

Parts like it in the library: the L-AP2127K-1.8TRG1 by PIELENST, the L-LP5907MFX-1.8/NOPB by PIELENST, the BCT2561EUK18-TR by BROADCHIP and the RS3212-1.8XF5 by Jiangsu RUNIC Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS7A2018PDBVR-TP?

11 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.