Skip to the content
123

SI2301DS

TECH PUBLICExtended

-55℃~+150℃ 1 P-Channel 110mΩ@4.5V 12nC 1V 1W 20V 3A 405pF 55pF 75pF SOT-23-3 MOSFETs ROHS

Part id
tech-public/SI2301DS
Category
MOSFETs
Package
SOT-23-3
Pins
3
In stock
2,493 at JLCPCB (C2841444)
Used on
7 open-source boards

Overview

The SI2301DS is a MOSFET made by TECH PUBLIC in a SOT-23-3 package with 3 pins. -55℃~+150℃ 1 P-Channel 110mΩ@4.5V 12nC 1V 1W 20V 3A 405pF 55pF 75pF SOT-23-3 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_PMOS_1G_2S_3D, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-23-3, from KiCad's library), ready for a KiCad board. 2,493 are in stock at JLCPCB (part C2841444). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_PMOS_1G_2S_3DFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:SOT-23-3From KiCad's library

Pinout

3
The pins of the SI2301DS
PinNameType
1GInput
2SPassive
3DPassive

Open-source boards using it

7
  • 2 layers124.7 × 140.5 mmCANSAT PAYLOAD MK3B, the printed circuit board in 3D

    CANSAT PAYLOAD MK3B

    its-villada/mCALCAN

    Satélite CANSAT del instituto técnico salesiano Villada.

    61 parts7GPL-3.0
  • 2 layers154.9 × 102.9 mmSynth, the printed circuit board in 3D

    Synth

    svofski/fannyadams

    STM32F405 experimental audio toy

    301 parts2
  • 2 layers20 × 20 mmSimple battery manager v1, the printed circuit board in 3D

    Simple battery manager v1

    gabrielvegamotta/simple-battery-manager

    A low cost simple battery manager breakout board.

    16 parts
  • 2 layers38 × 38 mm125kHz RFID I2C board with easyC, the printed circuit board in 3D

    125kHz RFID I2C board with easyC

    SolderedElectronics/125kHz-RFID-I2C-board-qwiic-hardware-design

    Hardware design, BOM, gerbers and 3D files for 125kHz-RFID-I2C-board-qwiic designed by Soldered Electronics.

    104 parts
  • 2 layers190 × 202 mm125kHz RFID board panel, the printed circuit board in 3D

    125kHz RFID board panel

    SolderedElectronics/125kHz-RFID-I2C-board-with-easyC-hardware-design

    Hardware design, BOM, gerbers and 3D files for 125kHz-RFID-I2C-board-with-easyC designed by Soldered Electronics.

    2,612 parts
  • 4 layers35.5 × 14.5 mmComplete v2.0, the printed circuit board in 3D

    Complete v2.0

    drpykachu/Sonar-Watch

    A self-designed, home-made watch intended to tell time in a funky and unique way!

    221 parts23
  • 2 layers36 × 20 mmPendu, the printed circuit board in 3D

    Pendu

    ayuusweetfish/Malletwand

    A pendulum as a hands-on musical interface for all · NIME 2024 Short Paper

    30 parts1CERN-OHL-S-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SI2301DS?

Yes. The symbol is Pinmap_Generic:Q_PMOS_1G_2S_3D and the footprint Package_TO_SOT_SMD:SOT-23-3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SI2301DS?

SOT-23-3, with 3 pins. Its footprint is drawn on this page.

Where is the SI2301DS datasheet?

TECH PUBLIC publishes it: the Datasheet link on this page opens it.

Where can I order the SI2301DS?

JLCPCB lists it as part C2841444, with 2,493 in stock; the sellers' links on this page open their listings.

What can replace the SI2301DS?

Parts like it in the library: the SI2301 by YONGYUTAI, the AO3400A by ElecSuper, the AO3400-HXY by HXY MOSFET and the AP2317A by ALLPOWER. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SI2301DS?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.