
SmartCard
dac63701/SmartCard
The goal of this project was to create a small and slim Bluetooth tracker that would fit into a credit card enclosure. To do this, a 0.8mm thin 80mah battery was used along with a 0.8mm PCB.
SusumuExtended
-55℃~+125℃ 0ppm/℃~+200ppm/℃ 100mΩ 333mW Thin Film Resistor ±1% 0805 Chip Resistor - Surface Mount ROHS
The RL1220S-R10-F is a chip Resistor, Surface Mount made by Susumu in a 0805 package with 2 pins. -55℃~+125℃ 0ppm/℃~+200ppm/℃ 100mΩ 333mW Thin Film Resistor ±1% 0805 Chip Resistor - Surface Mount ROHS.
PCBKit's library has its KiCad symbol (Device:R, from KiCad's library) and its footprint (Resistor_SMD:R_0805_2012Metric, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C3949393). 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | — | Passive |
| 2 | — | Passive |

dac63701/SmartCard
The goal of this project was to create a small and slim Bluetooth tracker that would fit into a credit card enclosure. To do this, a 0.8mm thin 80mah battery was used along with a 0.8mm PCB.
Yes. The symbol is Device:R and the footprint Resistor_SMD:R_0805_2012Metric, both drawn on this page. PCBKit places them on a board for you when you design with it.
0805, with 2 pins. Its footprint is drawn on this page.
Susumu publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C3949393, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the 0805W8F1002 by UNI-ROYAL, the 0805W8F1001 by UNI-ROYAL, the FRC0805J102 TS by FOJAN and the RCA050RLF by HKR. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.