VNI8200XP
STMicroelectronicsExtended
-40℃~+125℃ 10.5V~36V 110mΩ 700mA 8 Active High High Side Switch 过压保护、欠压锁定、反向电压保护、集成电荷泵、Overcurrent Protection、Over temperature protection、Short-Circuit Protection PowerSSO-36 Power Distribution Switches ROHS
- Part id
- st/VNI8200XP
- Category
- Power Distribution Switches
- Package
- PowerSSO-36
- Pins
- 37
- In stock
- 1 at JLCPCB (C2149987)
Overview
The VNI8200XP is a power Distribution Switche made by STMicroelectronics in a PowerSSO-36 package with 37 pins. -40℃~+125℃ 10.5V~36V 110mΩ 700mA 8 Active High High Side Switch 过压保护、欠压锁定、反向电压保护、集成电荷泵、Overcurrent Protection、Over temperature protection、Short-Circuit Protection PowerSSO-36 Power Distribution Switches ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:VNI8200XPTR, from EasyEDA) and its footprint (EasyEDA_Cloud:POWERSSO-36_L10.3-W7.5-P0.50-LS10.2-BL-EP, from EasyEDA), ready for a KiCad board. 1 are in stock at JLCPCB (part C2149987).
Symbol
Footprint
Pinout
37| Pin | Name | Type |
|---|---|---|
| 1 | SEL2 | Unspecified |
| 2 | SEL1/IN1 | Unspecified |
| 3 | WD_EN/IN2 | Unspecified |
| 4 | OUT_EN/IN3 | Unspecified |
| 5 | WD/IN4 | Unspecified |
| 6 | SDI/IN5 | Unspecified |
| 7 | CLK/IN6 | Unspecified |
| 8 | SS#/IN7 | Unspecified |
| 9 | SDO/IN8 | Unspecified |
| 10 | VREG | Unspecified |
| 11 | COL0 | Unspecified |
| 12 | COL1 | Unspecified |
| 13 | DCVDD | Unspecified |
| 14 | VREF | Unspecified |
| 15 | ROW0 | Unspecified |
| 16 | ROW1 | Unspecified |
| 17 | ROW2 | Unspecified |
| 18 | ROW3 | Unspecified |
| 19 | PG# | Unspecified |
| 20 | FAULT# | Unspecified |
| 21 | TWARN# | Unspecified |
| 22 | FB | Unspecified |
| 23 | GND | Unspecified |
| 24 | PHASE | Unspecified |
| 25 | BOOT | Unspecified |
| 26 | NC | Unspecified |
| 27 | OUT8 | Unspecified |
| 28 | OUT7 | Unspecified |
| 29 | OUT6 | Unspecified |
| 30 | OUT5 | Unspecified |
| 31 | OUT4 | Unspecified |
| 32 | OUT3 | Unspecified |
| 33 | OUT2 | Unspecified |
| 34 | OUT1 | Unspecified |
| 35 | NC | Unspecified |
| 36 | NC | Unspecified |
| 37 | EP | Unspecified |
Parts like it
3VND7012AY
PowerSSO-36-40℃~+150℃ 12mΩ 2 4V~28V 75A Active High High Side Switch Short-Circuit Protection(SCP)、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Over Temperature Protection PowerSSO-36 Power Distribution Switches ROHSSTMicroelectronicsPower Distribution SwitchesVND5E008AY-E
PowerSSO-36-40℃~+150℃ 2 4.5V~28V 8mΩ Active High High Side Switch PowerSSO-36 Power Distribution Switches ROHSSTMicroelectronicsPower Distribution SwitchesVND5E008MYTR-E
PowerSSO-36-40℃~+150℃ 2 4.5V~28V 8mΩ Active High High Side Switch PowerSSO-36 Power Distribution Switches ROHSSTMicroelectronicsPower Distribution Switches
Questions
Is there a KiCad symbol and footprint for the VNI8200XP?
Yes. The symbol is EasyEDA_Cloud:VNI8200XPTR and the footprint EasyEDA_Cloud:POWERSSO-36_L10.3-W7.5-P0.50-LS10.2-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the VNI8200XP?
PowerSSO-36, with 37 pins. Its footprint is drawn on this page.
Where is the VNI8200XP datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the VNI8200XP?
JLCPCB lists it as part C2149987, with 1 in stock; the sellers' links on this page open their listings.
What can replace the VNI8200XP?
Parts like it in the library: the VND7012AY by STMicroelectronics, the VND5E008AY-E by STMicroelectronics and the VND5E008MYTR-E by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.