Skip to the content
PCBKitNew board
VIPER22ADIP-E on a board, in 3D

VIPER22ADIP-E

STMicroelectronics

-40℃~+150℃ 60kHz 730V 8V~38V Flyback Isolation Over Voltage Protection、Under Voltage Protection、Over Current Protection、Over Temperature Protection Secondary-Side Feedback DIP-8 AC-DC Controllers and Regulators ROHS

Extended
DatasheetJLCPCBLCSCst/VIPER22ADIP-E
Category
AC DC Controllers And Regulators
Package
DIP-8
Pins
8

Overview

The VIPER22ADIP-E is an AC DC Controllers And Regulator made by STMicroelectronics in a DIP-8 package with 8 pins. -40℃~+150℃ 60kHz 730V 8V~38V Flyback Isolation Over Voltage Protection、Under Voltage Protection、Over Current Protection、Over Temperature Protection Secondary-Side Feedback DIP-8 AC-DC Controllers and Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:VIPer22ADIP-E, from KiCad's library) and its footprint (Package_DIP:DIP-8_W7.62mm, from KiCad's library), ready for a KiCad board. 12,286 are in stock at JLCPCB (part C5318). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

CTRLS1S2FB3VDD4D5D6D7D8
Regulator_Switching:VIPer22ADIP-EFrom KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W7.62mmFrom KiCad's library

Parameters

10
Features
Under-voltage lockout
Feedback System
Secondary-Side Feedback
Frequency - Switching
60kHz
Isolation
Isolation
Operating Temperature
-40℃~+150℃
Output Current
700mA
Topology
Flyback
Voltage - Breakdown
730V
Voltage - Supply
8V~38V
Working Mode
PWM Modulation

Order codes

1

Pinout

8
The pins of the VIPER22ADIP-E
PinNameType
1SPassive
2SPassive
3FBInput
4VDDPower in
5DPassive
6DPassive
7DPassive
8DPassive

Open-source boards using it

All 2
  • 2 layers99.7 × 48.8 mmAC DC Wandler, the printed circuit board in 3D

    AC DC Wandler

    MoElashmawi/Flyback-AC-DC-Converter

    Flyback AC-DC Converter (230V AC to 12V DC) — Full SMPS design using VIPer22A PWM Controller. Schematic, PCB layout & 3D render in KiCad.

    34 parts1MIT
  • 2 layers46.4 × 80 mm3Phase, the printed circuit board in 3D

    3Phase

    eauel/openzmeter

    openzmeter (oZm) is an Open Source system designed for power quality analysis and smart energy metering in power networks. It has been designed to comply with international standards IEC 61000-4-30 and EN 50160.

    153 partsGPL-3.0

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/st/VIPER22ADIP-E" title="VIPER22ADIP-E in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/st/VIPER22ADIP-E.jpg" alt="VIPER22ADIP-E" width="1200" height="900">
A picture that opens the part, for a README
[![VIPER22ADIP-E](https://pcbkit.io/embed/parts/st/VIPER22ADIP-E.jpg?size=s)](https://pcbkit.io/parts/st/VIPER22ADIP-E)

Questions

Is there a KiCad symbol and footprint for the VIPER22ADIP-E?

Yes. The symbol is Regulator_Switching:VIPer22ADIP-E and the footprint Package_DIP:DIP-8_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the VIPER22ADIP-E?

DIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the VIPER22ADIP-E datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the VIPER22ADIP-E?

JLCPCB lists it as part C5318, with 12,286 in stock; the sellers' links on this page open their listings.

What can replace the VIPER22ADIP-E?

Parts like it in the library: the NCP1200P60 by onsemi, the UCC3808N-1 by Texas Instruments, the FSBH0170ANY by onsemi and the FSBH0370NY by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the VIPER22ADIP-E?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

7