Skip to the content

STM32L476RCT6

STMicroelectronicsExtended

-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 256KB 32 Bit 51 80MHz ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS

Part id
st/STM32L476RCT6
Category
Microcontrollers (MCU, MPU, SOC)
Package
LQFP-64(10x10)
Pins
64
In stock
915 at JLCPCB (C73245)
Used on
4 open-source boards

Overview

The STM32L476RCT6 is a microcontroller made by STMicroelectronics in a LQFP-64(10x10) package with 64 pins. -40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 256KB 32 Bit 51 80MHz ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_ST_STM32L4:STM32L476RCTx, from KiCad's library) and its footprint (Package_QFP:LQFP-64_10x10mm_P0.5mm, from KiCad's library), ready for a KiCad board. 915 are in stock at JLCPCB (part C73245). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

1VBAT2PC133PC144PC155PH06PH17NRST8PC09PC110PC211PC312VSSA13VDDA14PA015PA116PA217PA318VSS19VDD20PA421PA522PA623PA724PC425PC526PB027PB128PB229PB1030PB1132VDD33PB1234PB1335PB1436PB1537PC638PC739PC840PC941PA842PA943PA1044PA1145PA1246PA1348VDDUSB49PA1450PA1551PC1052PC1153PC1254PD255PB356PB457PB558PB659PB760BOOT061PB862PB964VDD
MCU_ST_STM32L4:STM32L476RCTxFrom KiCad's library

Footprint

Package_QFP:LQFP-64_10x10mm_P0.5mmFrom KiCad's library

From the datasheet

20
Supply, least
1.71 V · VDD, recommended operating, min · p. 118
Supply, most
3.6 V · VDD, recommended operating, max · p. 118
Supply, least
1.62 V · VDDA, ADC or COMP used, recommended operating, min · p. 118
Supply, least
1.8 V · VDDA, DAC or OPAMP used, recommended operating, min · p. 118
Supply, least
2.4 V · VDDA, VREFBUF used, recommended operating, min · p. 118
Supply, most
3.6 V · VDDA, recommended operating, max · p. 118
Supply, least
1.55 V · VBAT, recommended operating, min · p. 118
Supply, most
3.6 V · VBAT, recommended operating, max · p. 118
Supply, least
3 V · VDDUSB, USB used, recommended operating, min · p. 118
Supply, most
3.6 V · VDDUSB, USB used, recommended operating, max · p. 118
Supply, most
3.6 V · VDDUSB, USB not used, recommended operating, max · p. 118
Supply, absolute maximum
4 V · VDD, VDDA, VDDUSB and VBAT, absolute maximum · p. 115
Works from
-40 °C · ambient operating temperature, min · p. 1
Works up to
85 °C · ambient operating temperature, suffix 6, max · p. 118
Junction, hottest
105 °C · junction temperature, suffix 6 operating, max · p. 262
Takes working
10.2 mA · run mode, 80 MHz, Flash ART enabled, peripherals disabled, 25 °C, typical · p. 125
Takes at most
12.1 mA · run mode, 80 MHz, Flash ART enabled, peripherals disabled, 85 °C, max · p. 125
Takes asleep
150 nA · standby, RTC and independent watchdog disabled, 3 V, 25 °C, typical · p. 143
A pin gives at most
20 mA · any I/O or control pin, source, absolute max · p. 116
Junction to air (LQFP64)
45 K/W · junction to ambient, natural convection · p. 262

Open-source boards using it

4
  • 2 layers101.9 × 91.2 mmTimer Gate KiCad, the printed circuit board in 3D

    Timer Gate KiCad

    Gasnyca/STM32_TimerGate

    Gate which measure time between entry and exit from gymkhana track.

    58 parts
  • 4 layers53.9 × 61.7 mmSTM32L476RG, the printed circuit board in 3D

    STM32L476RG

    GauravRDatta/ELEC5882M-project

    1) Gaussnewton5.m : This code performs an iterative non-linear Gauss-newton algebraic method for 3-D localisation of an initial guesstimate tag location near to its true original location within reasonable accuracy.

    60 parts
  • 2 layers60.5 × 45.8 mmLedgblue, the printed circuit board in 3D

    Ledgblue

    monero-project/kastelo

    The Sekura Monero Hardware Wallet

    61 parts115
  • 2 layers100 × 67 mmCalculator, the printed circuit board in 3D

    Calculator

    super-cow-powers/rpn2040-calculator

    83 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the STM32L476RCT6?

Yes. The symbol is MCU_ST_STM32L4:STM32L476RCTx and the footprint Package_QFP:LQFP-64_10x10mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the STM32L476RCT6?

LQFP-64(10x10), with 64 pins. Its footprint is drawn on this page.

Where is the STM32L476RCT6 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the STM32L476RCT6?

JLCPCB lists it as part C73245, with 915 in stock; the sellers' links on this page open their listings.

What can replace the STM32L476RCT6?

Parts like it in the library: the MSPM0G3507SPMR by Texas Instruments, the GD32F103RBT6 by GigaDevice, the GD32F103RCT6 by GigaDevice and the GD32F303RCT6 by GigaDevice. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the STM32L476RCT6?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.