Skip to the content

STM32L431RCT6

STMicroelectronicsExtended

-40℃~+85℃ 1.71V~3.6V 12bit 12bit 256KB 32 Bit 52 64KB 80MHz ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS

Part id
st/STM32L431RCT6
Category
Microcontrollers (MCU, MPU, SOC)
Package
LQFP-64(10x10)
Pins
64
In stock
135 at JLCPCB (C92468)
Used on
6 open-source boards

Overview

The STM32L431RCT6 is a microcontroller made by STMicroelectronics in a LQFP-64(10x10) package with 64 pins. -40℃~+85℃ 1.71V~3.6V 12bit 12bit 256KB 32 Bit 52 64KB 80MHz ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_ST_STM32L4:STM32L431RCTx, from KiCad's library) and its footprint (Package_QFP:LQFP-64_10x10mm_P0.5mm, from KiCad's library), ready for a KiCad board. 135 are in stock at JLCPCB (part C92468). 6 open-source boards in 4 repositories on GitHub use it.

Symbol

1VBAT2PC133PC144PC155PH06PH17NRST8PC09PC110PC211PC312VSSA13VDDA14PA015PA116PA217PA318VSS19VDD20PA421PA522PA623PA724PC425PC526PB027PB128PB229PB1030PB1132VDD33PB1234PB1335PB1436PB1537PC638PC739PC840PC941PA842PA943PA1044PA1145PA1246PA1348VDD49PA1450PA1551PC1052PC1153PC1254PD255PB356PB457PB558PB659PB760PH361PB862PB964VDD
MCU_ST_STM32L4:STM32L431RCTxFrom KiCad's library

Footprint

Package_QFP:LQFP-64_10x10mm_P0.5mmFrom KiCad's library

From the datasheet

18
Supply, least
1.71 V · VDD, recommended operating, min · p. 88
Supply, most
3.6 V · VDD, recommended operating, max · p. 88
Supply, least
1.62 V · VDDA, ADC or COMP used, min · p. 88
Supply, least
1.8 V · VDDA, DAC or OPAMP used, min · p. 88
Supply, least
2.4 V · VDDA, VREFBUF used, min · p. 88
Supply, most
3.6 V · VDDA, recommended operating, max · p. 88
Supply, least
1.55 V · VBAT, recommended operating, min · p. 88
Supply, most
3.6 V · VBAT, recommended operating, max · p. 88
Supply, absolute maximum
4 V · VDD, VDDA, VBAT, absolute maximum · p. 86
Works from
-40 °C · ambient, suffix 6, min · p. 206
Works up to
85 °C · ambient, suffix 6, maximum power dissipation, max · p. 206
Junction, hottest
105 °C · junction, suffix 6, operating max · p. 206
Junction, hottest
150 °C · junction, absolute maximum · p. 87
Takes working
8.53 mA · sum of VDD, VDDA and VBAT, run 80 MHz, Flash ART enabled, peripherals disabled, 25 °C, typical · p. 94
Takes at most
9.8 mA · sum of VDD, VDDA and VBAT, run 80 MHz, Flash ART disabled, peripherals disabled, 85 °C, max · p. 95
Takes asleep
44.3 nA · sum of VDD, VDDA and VBAT, shutdown, RTC disabled, backup registers retained, 3 V, 25 °C, typical · p. 105
A pin gives at most
20 mA · any I/O or control pin, source, absolute maximum · p. 87
Junction to air (LQFP64)
46 K/W · junction to ambient · p. 203

Open-source boards using it

6
  • 4 layers85 × 85 mmEPS, the printed circuit board in 3D

    EPS

    carmamo/Avionics-FYCUS

    This project involves the creation of the PCB and firmware for a 3U CubeSat, in collaboration with FYCUS, a team of passionate students at the University of Seville.

    118 parts
  • 2 layers21.7 × 10 mmSensor Unit, the printed circuit board in 3D

    Sensor Unit

    Dooganar/engg3800-t3-eaar-pcb-design

    A repo used to track and collaborate on the pcb design for the University of Queensland "Team Project II" course.

    164 parts
  • 4 layers85 × 70 mmMCU Prototype, the printed circuit board in 3D

    MCU Prototype

    pawel-dzialo/Epilepsy-Electronics

    30 parts
  • 4 layers85 × 85 mmPayload, the printed circuit board in 3D

    Payload

    carmamo/Avionics-FYCUS

    This project involves the creation of the PCB and firmware for a 3U CubeSat, in collaboration with FYCUS, a team of passionate students at the University of Seville.

    54 parts
  • 2 layers100.4 × 145.1 mmBASE PCB, the printed circuit board in 3D

    BASE PCB

    damnitzhemanth-oss/Custom-Scientific-Calc

    Making my own scientific calculator!

    38 parts
  • 2 layers139 × 139 mmControl Unit, the printed circuit board in 3D

    Control Unit

    Dooganar/engg3800-t3-eaar-pcb-design

    A repo used to track and collaborate on the pcb design for the University of Queensland "Team Project II" course.

    67 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the STM32L431RCT6?

Yes. The symbol is MCU_ST_STM32L4:STM32L431RCTx and the footprint Package_QFP:LQFP-64_10x10mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the STM32L431RCT6?

LQFP-64(10x10), with 64 pins. Its footprint is drawn on this page.

Where is the STM32L431RCT6 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the STM32L431RCT6?

JLCPCB lists it as part C92468, with 135 in stock; the sellers' links on this page open their listings.

What can replace the STM32L431RCT6?

Parts like it in the library: the MSPM0G3507SPMR by Texas Instruments, the GD32F103RBT6 by GigaDevice, the GD32F103RCT6 by GigaDevice and the GD32F303RCT6 by GigaDevice. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the STM32L431RCT6?

6 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.