
Tdr
Jana-Marie/Mini-TDR
Software defined TDR based on an STM32G474, MCU+USB interface work and are tested, TDR AFE is untested. Firmware needs to be updated.
STMicroelectronicsExtended
-40℃~+85℃ 1.71V~3.6V 128KB 128KB 12bit 12bit 170MHz 32 Bit 38 ARM Cortex-M4F Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHS
The STM32G474CBT6 is a microcontroller made by STMicroelectronics in a LQFP-48_7x7 package with 48 pins. -40℃~+85℃ 1.71V~3.6V 128KB 128KB 12bit 12bit 170MHz 32 Bit 38 ARM Cortex-M4F Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32G4:STM32G474CBTx, from KiCad's library) and its footprint (Package_QFP:LQFP-48_7x7mm_P0.5mm, from KiCad's library), ready for a KiCad board. 434 are in stock at JLCPCB (part C730123). 8 open-source boards in 6 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | VBAT | Power in |
| 2 | PC13 | Input/output |
| 3 | PC14 | Input/output |
| 4 | PC15 | Input/output |
| 5 | PF0 | Input/output |
| 6 | PF1 | Input/output |
| 7 | PG10 | Input/output |
| 8 | PA0 | Input/output |
| 9 | PA1 | Input/output |
| 10 | PA2 | Input/output |
| 11 | PA3 | Input/output |
| 12 | PA4 | Input/output |
| 13 | PA5 | Input/output |
| 14 | PA6 | Input/output |
| 15 | PA7 | Input/output |
| 16 | PB0 | Input/output |
| 17 | PB1 | Input/output |
| 18 | PB2 | Input/output |
| 19 | VSSA | Power in |
| 20 | VREF+ | Input |
| 21 | VDDA | Power in |
| 22 | PB10 | Input/output |
| 23 | VSS | Power in |
| 24 | VDD | Power in |
| 25 | PB11 | Input/output |
| 26 | PB12 | Input/output |
| 27 | PB13 | Input/output |
| 28 | PB14 | Input/output |
| 29 | PB15 | Input/output |
| 30 | PA8 | Input/output |
| 31 | PA9 | Input/output |
| 32 | PA10 | Input/output |
| 33 | PA11 | Input/output |
| 34 | PA12 | Input/output |
| 35 | VSS | Passive |
| 36 | VDD | Power in |
| 37 | PA13 | Input/output |
| 38 | PA14 | Input/output |
| 39 | PA15 | Input/output |
| 40 | PB3 | Input/output |
| 41 | PB4 | Input/output |
| 42 | PB5 | Input/output |
| 43 | PB6 | Input/output |
| 44 | PB7 | Input/output |
| 45 | PB8 | Input/output |
| 46 | PB9 | Input/output |
| 47 | VSS | Passive |
| 48 | VDD | Power in |

Jana-Marie/Mini-TDR
Software defined TDR based on an STM32G474, MCU+USB interface work and are tested, TDR AFE is untested. Firmware needs to be updated.


Motokichirou/gamma-spectrometer
NaI(Tl) gamma spectrometer: STM32G474 + R1307 PMT + 4-board stack, KiCad schematics, LTspice simulations

jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack


zinedkahitaf-lang/AKD-SAFE-SourceControl
Infrastructure-Based Active Engineering Safety Platform. Move the safety burden from the worker to the hazard. Engineering prototype - not a certified safety device.
Yes. The symbol is MCU_ST_STM32G4:STM32G474CBTx and the footprint Package_QFP:LQFP-48_7x7mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
LQFP-48_7x7, with 48 pins. Its footprint is drawn on this page.
STMicroelectronics publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C730123, with 434 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the STM32G431CBT6 by STMicroelectronics, the HC32F460JETA-LQFP48 by XHSC, the AT32F413CBT7 by ARTERY and the AT32F435CGT7 by ARTERY. Check their datasheets: a part that fits the footprint may still differ in its ratings.
8 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.