
STM32F767ZIT6
STMicroelectronicsExtended
-40℃~+85℃ 1.7V~3.6V 114 12bit 12bit 216MHz 2MB 32 Bit 512KB ARM Cortex-M7 Built-in FLASH LQFP-144(20x20) Microcontrollers (MCU/MPU/SOC) ROHS
- Part id
- st/STM32F767ZIT6
- Category
- Microcontrollers (MCU, MPU, SOC)
- Package
- LQFP-144(20x20)
- Pins
- 144
- In stock
- 118 at JLCPCB (C90235)
- Used on
- 5 open-source boards
Overview
The STM32F767ZIT6 is a microcontroller made by STMicroelectronics in a LQFP-144(20x20) package with 144 pins. -40℃~+85℃ 1.7V~3.6V 114 12bit 12bit 216MHz 2MB 32 Bit 512KB ARM Cortex-M7 Built-in FLASH LQFP-144(20x20) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32F7:STM32F767ZITx, from KiCad's library) and its footprint (Package_QFP:LQFP-144_20x20mm_P0.5mm, from KiCad's library), ready for a KiCad board. 118 are in stock at JLCPCB (part C90235). 5 open-source boards in 3 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
20- Supply, least
- 1.7 V · VDD, recommended operating min; external power supply supervisor required at 1.7 V · p. 116
- Supply, most
- 3.6 V · VDD, recommended operating max · p. 116
- Supply, most
- 2.4 V · VDDA, recommended operating max; ADC limited to 1.2 M samples · p. 116
- Supply, least
- 2.4 V · VDDA, recommended operating min; ADC limited to 2.4 M samples · p. 116
- Supply, least
- 3 V · VDDUSB, recommended operating min; USB used · p. 116
- Supply, least
- 1.65 V · VBAT, recommended operating min · p. 116
- Supply, absolute maximum
- 4 V · VDD–VSS, absolute max; also VDDA, VBAT, VDDUSB and VDDSDMMC · p. 114
- Works from
- -40 °C · TA, suffix 6 min; maximum power dissipation · p. 117
- Works up to
- 85 °C · TA, suffix 6 max; maximum power dissipation · p. 117
- Works up to
- 105 °C · TA, suffix 6 max; low power dissipation subject to footnote 10 · p. 117
- Junction, hottest
- 125 °C · TJ, absolute max · p. 115
- Junction, hottest
- 105 °C · TJ, operating max; suffix 6 · p. 117
- Takes working
- 92 mA · IDD, typical; 216 MHz, peripherals disabled, Flash single bank or AXI SRAM, L1-cache ON, regulator ON · p. 123
- Takes at most
- 268 mA · IDD, max stated Run current; 200 MHz, peripherals enabled, TA = 105 °C, regulator ON · p. 123
- Takes asleep
- 2.4 µA · IDD_STBY, typical; 3.3 V, 25 °C, backup SRAM, RTC and LSE OFF, PDR OFF · p. 132
- A pin gives at most
- 25 mA · IIO, absolute max sunk by one I/O or control pin · p. 115
- Junction to air (LQFP144)
- 40 K/W · junction-to-ambient thermal resistance · p. 251
- Takes at most
- 293 mA · VDD, max Run current at 200 MHz and TA = 105 °C, Flash single bank on ITCM, ART disabled, all peripherals enabled · p. 127
- Takes asleep
- 1.1 µA · VDD, typical Standby current at 1.7 V and TA = 25 °C, backup SRAM, RTC and LSE OFF · p. 132
- A pin gives at most
- 20 mA · GPIO maximum source or sink current with relaxed VOL/VOH, except PC13, PC14, PC15 and PI8 · p. 164
What it is and has
29- Core
- ARM 32-bit Cortex-M7 CPU · p. 1
- Core acceleration
- DPFPU, ART Accelerator and L1-cache · p. 1
- Cache
- 16 Kbytes I/D cache · p. 1
- Clock and MPU
- Up to 216 MHz; MPU · p. 1
- CPU performance
- 462 DMIPS / 2.14 DMIPS/MHz, Dhrystone 2.1 · p. 1
- DSP
- DSP instructions · p. 1
- Flash memory
- Up to 2 Mbytes, two banks allowing read-while-write · p. 1
- SRAM
- 512 Kbytes, including 128 Kbytes data TCM · p. 1
- Instruction TCM RAM
- 16 Kbytes · p. 1
- Quad-SPI
- Dual mode · p. 1
- Graphics accelerator
- Chrom-ART Accelerator (DMA2D) · p. 1
- JPEG
- Hardware JPEG codec · p. 1
- LCD
- LCD-TFT controller supporting up to XGA resolution · p. 1
- DAC
- 2 × 12-bit · p. 1
- DMA
- 16-stream controller with FIFOs and burst support · p. 1
- Low-power modes
- Sleep, Stop and Standby · p. 1
- USB power
- Dedicated USB power · p. 1
- External oscillator
- 4-to-26 MHz crystal oscillator · p. 1
- Internal oscillator
- 16 MHz factory-trimmed RC, 1% accuracy · p. 1
- RTC oscillator
- 32 kHz oscillator with calibration · p. 1
- Internal low-speed oscillator
- 32 kHz RC with calibration · p. 1
- CPU clock
- Up to 216 MHz · p. 1
- CPU performance
- 462 DMIPS, 2.14 DMIPS/MHz (Dhrystone 2.1) · p. 1
- Core
- ARM® 32-bit Cortex®-M7 CPU · p. 1
- Core acceleration
- DPFPU, ART Accelerator™, L1-cache · p. 1
- Clock
- Up to 216 MHz · p. 1
- Performance
- 462 DMIPS, 2.14 DMIPS/MHz (Dhrystone 2.1) · p. 1
- Instructions
- DSP instructions · p. 1
- Package
- LQFP144 (20 × 20 mm) · p. 1
Around it
2- cap 2.2 μF
- between VCAP_1 and VSS; Ceramic; regulator ON; ESR <2Ω. One capacitor on each VCAP pin. · p. 119
- cap 100 nF
- between VCAP_1 and VSS; Decoupling capacitor replacing the 2.2 uF capacitor when bypassing the regulator; regulator OFF requires a package featuring BYPASS_REG. · p. 119
Specifications
623| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External main supply voltage (including VDDA, VDD, VBAT, VDDUSB, VDDDSI (1) and VDDSDMMC)(2) VDD–VSS | VDDDSI applies only to STM32F7x9 sales types | min -0.3 · max 4 V | 114 |
| Input voltage on TTa pins VIN | Minimum VSS − 0.3 V | max 4 V | 114 |
| Input voltage on any other pin VIN | Minimum VSS − 0.3 V | max 4 V | 114 |
| Input voltage on BOOT pin VIN | Minimum VSS | max 9 V | 114 |
| Variations between different VDD power pins |ΔVDDx| | max 50 mV | 114 | |
| Variations between all the different ground pins(4) |VSSX −VSS| | Includes VREF- pin | max 50 mV | 114 |
| Total current into sum of all VDD_x power lines (source)(1) ΣIVDD | max 420 mA | 115 | |
| Total current out of sum of all VSS_x ground lines (sink) Σ IVSS | max -420 mA | 115 | |
| Total current into VDDUSB power line (source) Σ IVDDUSB | max 25 mA | 115 | |
| Total current into VDDSDMMC power line (source) Σ IVDDSDMMC | max 60 mA | 115 | |
| Maximum current into each VDD_x power line (source)(1) IVDD | max 100 mA | 115 | |
| Maximum current into VDDSDMMC power line (source): PG[12:9], PD[7:6] IVDDSDMMC | max 100 mA | 115 | |
| Maximum current out of each VSS_x ground line (sink)(1) IVSS | max -100 mA | 115 | |
| Output current sunk by any I/O and control pin IIO | max 25 mA | 115 | |
| Output current sourced by any I/Os and control pin IIO | max -25 mA | 115 | |
| Total output current sunk by sum of all I/O and control pins (2) ΣIIO | max 120 mA | 115 | |
| Total output current sunk by sum of all USB I/Os ΣIIO | max 25 mA | 115 | |
| Total output current sunk by sum of all SDMMC I/Os ΣIIO | max 120 mA | 115 | |
| Total output current sourced by sum of all I/Os and control pins except USB I/Os(2) ΣIIO | max -120 mA | 115 | |
| Injected current on TTa pins(4) IINJ(PIN) | Printed maximum ±5 mA | max 5 mA | 115 |
| Total injected current (sum of all I/O and control pins)(5) ΣIINJ(PIN)(4) | Printed maximum ±25 mA; absolute sum of positive and negative injected currents | max 25 mA | 115 |
| Storage temperature range TSTG | min -65 · max 150 °C | 115 | |
| Maximum junction temperature TJ | max 125 °C | 115 | |
| Internal AHB clock frequency fHCLK | Power Scale 3, VOS[1:0] = 0x01, regulator ON, over-drive OFF | min 0 · max 144 MHz | 116 |
| Internal AHB clock frequency fHCLK | Power Scale 2, VOS[1:0] = 0x10, regulator ON, over-drive OFF; minimum 0 MHz is printed on a separate line | max 168 MHz | 116 |
| Internal AHB clock frequency fHCLK | Power Scale 2, VOS[1:0] = 0x10, regulator ON, over-drive ON; minimum 0 MHz is printed on a separate line | max 180 MHz | 116 |
| Internal AHB clock frequency fHCLK | Power Scale 1, VOS[1:0] = 0x11, regulator ON, over-drive OFF; minimum 0 MHz is printed on a separate line | max 180 MHz | 116 |
| Internal AHB clock frequency fHCLK | Power Scale 1, VOS[1:0] = 0x11, regulator ON, over-drive ON, suffix 6; minimum 0 MHz is printed on a separate line | max 216 MHz | 116 |
| Internal APB1 clock frequency fPCLK1 | Over-drive OFF | min 0 · max 45 MHz | 116 |
| Internal APB1 clock frequency fPCLK1 | Over-drive ON | min 0 · max 54 MHz | 116 |
| Internal APB2 clock frequency fPCLK2 | Over-drive OFF | min 0 · max 90 MHz | 116 |
| Internal APB2 clock frequency fPCLK2 | Over-drive ON | min 0 · max 108 MHz | 116 |
| Standard operating voltage VDD | Minimum 1.7 V requires an external power supply supervisor | min 1.7 · max 3.6 V | 116 |
| Analog operating voltage (ADC limited to 1.2 M samples) VDDA | Must be the same potential as VDD; minimum 1.7 V requires an external power supply supervisor | min 1.7 · max 2.4 V | 116 |
| Analog operating voltage (ADC limited to 2.4 M samples) VDDA | Must be the same potential as VDD | min 2.4 · max 3.6 V | 116 |
| USB supply voltage (supply voltage for PA11,PA12, PB14 and PB15 pins) VDDUSB | USB not used | min 1.7 · typ 3.3 · max 3.6 V | 116 |
| USB supply voltage (supply voltage for PA11,PA12, PB14 and PB15 pins) VDDUSB | USB used | min 3 · max 3.6 V | 116 |
| Backup operating voltage VBAT | min 1.65 · max 3.6 V | 116 | |
| SDMMC2 supply voltage (supply voltage for PG[12:9] and PD6 pins) VDDSDMMC | It can be different from VDD | min 1.7 · max 3.6 V | 116 |
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12 | Power Scale 3, VOS[1:0] = 0x01, HCLK maximum 144 MHz | min 1.08 · typ 1.14 · max 1.2 V | 117 |
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12 | Power Scale 2, VOS[1:0] = 0x10, HCLK maximum 168 MHz with over-drive OFF or 180 MHz with over-drive ON | min 1.2 · typ 1.26 · max 1.32 V | 117 |
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12 | Power Scale 1, VOS[1:0] = 0x11, HCLK maximum 180 MHz with over-drive OFF or 216 MHz with over-drive ON | min 1.26 · typ 1.32 · max 1.4 V | 117 |
| Regulator OFF: 1.2 V external voltage must be supplied from external regulator on VCAP_1/VCAP_2 pins(7) V12 | Max frequency 144 MHz; requires a package featuring BYPASS_REG | min 1.1 · typ 1.14 · max 1.2 V | 117 |
| Regulator OFF: 1.2 V external voltage must be supplied from external regulator on VCAP_1/VCAP_2 pins(7) V12 | Max frequency 168MHz; requires a package featuring BYPASS_REG | min 1.2 · typ 1.26 · max 1.32 V | 117 |
| Regulator OFF: 1.2 V external voltage must be supplied from external regulator on VCAP_1/VCAP_2 pins(7) V12 | Max frequency 180 MHz; requires a package featuring BYPASS_REG | min 1.26 · typ 1.32 · max 1.38 V | 117 |
| Input voltage on RST and FT pins(8) VIN | 2 V ≤ VDD ≤ 3.6 V | min -0.3 · max 5.5 V | 117 |
| Input voltage on RST and FT pins(8) VIN | VDD ≤ 2 V | min -0.3 · max 5.2 V | 117 |
| Input voltage on TTa pins VIN | Maximum VDDA + 0.3 V | min -0.3 V | 117 |
| Input voltage on BOOT pin VIN | min 0 · max 9 V | 117 | |
| Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7(9) PD | LQFP144; suffix 6, TA = 85 °C | max 500 mW | 117 |
| Ambient temperature for 6 suffix version TA | Maximum power dissipation | min -40 · max 85 °C | 117 |
| Ambient temperature for 6 suffix version TA | Low power dissipation(10) | min -40 · max 105 °C | 117 |
| Junction temperature range TJ | 6 suffix version | min -40 · max 105 °C | 117 |
| ESR of external capacitor ESR | ESR <2Ω; strict inequality | max 2 Ω | 119 |
| VDD rise time rate tVDD | min 20 us/V | 119 | |
| VDD fall time rate tVDD | min 20 us/V | 119 | |
| VDD rise time rate tVDD | Power-up; requires a package featuring BYPASS_REG | min 20 us/V | 119 |
| VDD fall time rate tVDD | Power-down; requires a package featuring BYPASS_REG | min 20 us/V | 119 |
| VCAP_1 and VCAP_2 rise time rate tVCAP | Power-up; requires a package featuring BYPASS_REG | min 20 us/V | 119 |
| VCAP_1 and VCAP_2 fall time rate tVCAP | Power-down; requires a package featuring BYPASS_REG | min 20 us/V | 119 |
| Over_drive switch enable time Tod_swen | HSI | typ 45 us | 121 |
| Over_drive switch enable time Tod_swen | HSE max for 4 MHz and min for 26 MHz | min 45 · max 100 us | 121 |
| Over_drive switch enable time Tod_swen | External HSE 50 MHz | typ 40 us | 121 |
| Over_drive switch disable time Tod_swdis | HSI | typ 20 us | 121 |
| Over_drive switch disable time Tod_swdis | HSE max for 4 MHz and min for 26 MHz | min 20 · max 80 us | 121 |
| Over_drive switch disable time Tod_swdis | External HSE 50 MHz | typ 15 us | 121 |
| Supply current in RUN mode IDD | All peripherals enabled; 216 MHz; max at TA = 25 °C | typ 190 · max 219 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; 216 MHz; TA = 85 °C | max 255 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; 200 MHz; max at TA = 25 °C | typ 177 · max 205 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; 200 MHz; TA = 85 °C | max 241 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; 200 MHz; TA = 105 °C | max 268 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; 180 MHz; max at TA = 25 °C | typ 157 · max 173 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; 180 MHz; TA = 85 °C | max 208 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; 180 MHz; TA = 105 °C | max 228 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; 168 MHz; max at TA = 25 °C | typ 139 · max 153 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; 168 MHz; TA = 85 °C | max 185 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; 168 MHz; TA = 105 °C | max 204 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; 144 MHz; max at TA = 25 °C | typ 107 · max 117 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; 144 MHz; TA = 85 °C | max 144 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; 144 MHz; TA = 105 °C | max 161 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; 60 MHz; max at TA = 25 °C | typ 48 · max 54 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; 60 MHz; TA = 85 °C | max 81 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; 60 MHz; TA = 105 °C | max 98 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; 25 MHz; max at TA = 25 °C | typ 23 · max 28 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; 25 MHz; TA = 85 °C | max 54 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; 25 MHz; TA = 105 °C | max 71 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 216 MHz; max at TA = 25 °C | typ 92 · max 104 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 216 MHz; TA = 85 °C | max 150 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 200 MHz; max at TA = 25 °C | typ 86 · max 97 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 200 MHz; TA = 85 °C | max 143 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 200 MHz; TA = 105 °C | max 170 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 180 MHz; max at TA = 25 °C | typ 76 · max 85 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 180 MHz; TA = 85 °C | max 119 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 180 MHz; TA = 105 °C | max 140 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 168 MHz; max at TA = 25 °C | typ 67 · max 75 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 168 MHz; TA = 85 °C | max 107 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 168 MHz; TA = 105 °C | max 126 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 144 MHz; max at TA = 25 °C | typ 52 · max 58 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 144 MHz; TA = 85 °C | max 84 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 144 MHz; TA = 105 °C | max 101 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 60 MHz; max at TA = 25 °C | typ 23 · max 28 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 60 MHz; TA = 85 °C | max 54 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 60 MHz; TA = 105 °C | max 71 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 25 MHz; max at TA = 25 °C | typ 11 · max 15 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 25 MHz; TA = 85 °C | max 42 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; 25 MHz; TA = 105 °C | max 56 mA | 123 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | Table title says Sleep mode; all peripherals enabled; 180 MHz; max at 25 °C; requires BYPASS_REG | typ 102 · max 114 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals enabled; 180 MHz; 85 °C; requires BYPASS_REG | max 148 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals enabled; 180 MHz; 105 °C; requires BYPASS_REG | max 168 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD | All peripherals enabled; 180 MHz; max at 25 °C; requires BYPASS_REG | typ 1 · max 2 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals enabled; 168 MHz; max at 25 °C; requires BYPASS_REG | typ 91 · max 101 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals enabled; 168 MHz; 85 °C; requires BYPASS_REG | max 132 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals enabled; 168 MHz; 105 °C; requires BYPASS_REG | max 152 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals enabled; 144 MHz; max at 25 °C; requires BYPASS_REG | typ 71 · max 78 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals enabled; 144 MHz; 85 °C; requires BYPASS_REG | max 105 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals enabled; 144 MHz; 105 °C; requires BYPASS_REG | max 122 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals enabled; 60 MHz; max at 25 °C; requires BYPASS_REG | typ 32 · max 37 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals enabled; 60 MHz; 85 °C; requires BYPASS_REG | max 64 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals enabled; 60 MHz; 105 °C; requires BYPASS_REG | max 81 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals enabled; 25 MHz; max at 25 °C; requires BYPASS_REG | typ 16 · max 20 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals enabled; 25 MHz; 85 °C; requires BYPASS_REG | max 46 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals enabled; 25 MHz; 105 °C; requires BYPASS_REG | max 64 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals disabled; 168 MHz; max at 25 °C; requires BYPASS_REG | typ 12 · max 16 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals disabled; 168 MHz; 85 °C; requires BYPASS_REG | max 47 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals disabled; 168 MHz; 105 °C; requires BYPASS_REG | max 67 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals disabled; 144 MHz; max at 25 °C; requires BYPASS_REG | typ 9 · max 13 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals disabled; 144 MHz; 85 °C; requires BYPASS_REG | max 39 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals disabled; 144 MHz; 105 °C; requires BYPASS_REG | max 56 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals disabled; 60 MHz; max at 25 °C; requires BYPASS_REG | typ 5 · max 9 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals disabled; 60 MHz; 85 °C; requires BYPASS_REG | max 35 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals disabled; 60 MHz; 105 °C; requires BYPASS_REG | max 52 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals disabled; 25 MHz; max at 25 °C; requires BYPASS_REG | typ 3 · max 7 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals disabled; 25 MHz; 85 °C; requires BYPASS_REG | max 33 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | All peripherals disabled; 25 MHz; 105 °C; requires BYPASS_REG | max 50 mA | 131 |
| Supply current in Stop mode, main regulator in Run mode IDD_STOP_NM | Normal mode; Flash memory in Stop mode, all oscillators OFF, no IWDG; typ at 25 °C; max at 25 °C, VDD = 3.6 V | typ 0.55 · max 3 mA | 131 |
| Supply current in Stop mode, main regulator in Run mode IDD_STOP_NM | Normal mode; Flash memory in Stop mode, all oscillators OFF, no IWDG; 85 °C, VDD = 3.6 V | max 18 mA | 131 |
| Supply current in Stop mode, main regulator in Run mode IDD_STOP_NM | Normal mode; Flash memory in Stop mode, all oscillators OFF, no IWDG; 105 °C, VDD = 3.6 V | max 27 mA | 131 |
| Supply current in Stop mode, main regulator in Run mode IDD_STOP_NM | Normal mode; Flash memory in Deep power down mode, all oscillators OFF; typ at 25 °C; max at 25 °C, VDD = 3.6 V | typ 0.5 · max 3 mA | 131 |
| Supply current in Stop mode, main regulator in Run mode IDD_STOP_NM | Normal mode; Flash memory in Deep power down mode, all oscillators OFF; 85 °C, VDD = 3.6 V | max 18 mA | 131 |
| Supply current in Stop mode, main regulator in Run mode IDD_STOP_NM | Normal mode; Flash memory in Deep power down mode, all oscillators OFF; 105 °C, VDD = 3.6 V | max 27 mA | 131 |
| Supply current in Stop mode, main regulator in Low-power mode IDD_STOP_NM | Normal mode; Flash memory in Stop mode, all oscillators OFF, no IWDG; typ at 25 °C; max at 25 °C, VDD = 3.6 V | typ 0.42 · max 2.5 mA | 131 |
| Supply current in Stop mode, main regulator in Low-power mode IDD_STOP_NM | Normal mode; Flash memory in Stop mode, all oscillators OFF, no IWDG; 85 °C, VDD = 3.6 V | max 15 mA | 131 |
| Supply current in Stop mode, main regulator in Low-power mode IDD_STOP_NM | Normal mode; Flash memory in Stop mode, all oscillators OFF, no IWDG; 105 °C, VDD = 3.6 V | max 24 mA | 131 |
| Supply current in Stop mode, main regulator in Low-power mode IDD_STOP_NM | Normal mode; Flash memory in Deep power down mode, all oscillators OFF, no IWDG; typ at 25 °C; max at 25 °C, VDD = 3.6 V | typ 0.37 · max 2.5 mA | 131 |
| Supply current in Stop mode, main regulator in Low-power mode IDD_STOP_NM | Normal mode; Flash memory in Deep power down mode, all oscillators OFF, no IWDG; 85 °C, VDD = 3.6 V | max 15 mA | 131 |
| Supply current in Stop mode, main regulator in Low-power mode IDD_STOP_NM | Normal mode; Flash memory in Deep power down mode, all oscillators OFF, no IWDG; 105 °C, VDD = 3.6 V | max 24 mA | 131 |
| Supply current in Stop mode, main regulator in Low voltage and under-drive modes IDD_STOP_UDM | Regulator in Run mode, Flash memory in Deep power down mode, all oscillators OFF, no IWDG; typ at 25 °C; max at 25 °C, VDD = 3.6 V | typ 0.18 · max 1.2 mA | 131 |
| Supply current in Stop mode, main regulator in Low voltage and under-drive modes IDD_STOP_UDM | Regulator in Run mode, Flash memory in Deep power down mode, all oscillators OFF, no IWDG; 85 °C, VDD = 3.6 V | max 6 mA | 131 |
| Supply current in Stop mode, main regulator in Low voltage and under-drive modes IDD_STOP_UDM | Regulator in Run mode, Flash memory in Deep power down mode, all oscillators OFF, no IWDG; 105 °C, VDD = 3.6 V | max 10 mA | 131 |
| Supply current in Stop mode, main regulator in Low voltage and under-drive modes IDD_STOP_UDM | Regulator in Low-power mode, Flash memory in Deep power down mode, all oscillators OFF, no IWDG; typ at 25 °C; max at 25 °C, VDD = 3.6 V | typ 0.13 · max 1.1 mA | 131 |
| Supply current in Stop mode, main regulator in Low voltage and under-drive modes IDD_STOP_UDM | Regulator in Low-power mode, Flash memory in Deep power down mode, all oscillators OFF, no IWDG; 85 °C, VDD = 3.6 V | max 6 mA | 131 |
| Supply current in Stop mode, main regulator in Low voltage and under-drive modes IDD_STOP_UDM | Regulator in Low-power mode, Flash memory in Deep power down mode, all oscillators OFF, no IWDG; 105 °C, VDD = 3.6 V | max 10 mA | 131 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC and LSE OFF; VDD = 1.7 V, TA = 25 °C, PDR OFF | typ 1.1 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC and LSE OFF; VDD = 2.4 V, TA = 25 °C, PDR OFF | typ 1.9 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC and LSE OFF; VDD = 3.3 V, TA = 25 °C; typical with PDR OFF | typ 2.4 · max 5 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC and LSE OFF; VDD = 3.3 V, TA = 85 °C | max 18 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC and LSE OFF; VDD = 3.3 V, TA = 105 °C | max 38 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC and LSE OFF; VDD = 1.7 V, TA = 25 °C, PDR OFF | typ 1.9 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC and LSE OFF; VDD = 2.4 V, TA = 25 °C, PDR OFF | typ 2.7 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC and LSE OFF; VDD = 3.3 V, TA = 25 °C; typical with PDR OFF | typ 3.2 · max 6 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC and LSE OFF; VDD = 3.3 V, TA = 85 °C | max 23 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC and LSE OFF; VDD = 3.3 V, TA = 105 °C | max 48 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in low drive mode; VDD = 1.7 V, TA = 25 °C, PDR OFF | typ 1.7 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in low drive mode; VDD = 2.4 V, TA = 25 °C, PDR OFF | typ 2.7 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in low drive mode; VDD = 3.3 V, TA = 25 °C; typical with PDR OFF | typ 3.5 · max 7 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in low drive mode; VDD = 3.3 V, TA = 85 °C | max 26 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in low drive mode; VDD = 3.3 V, TA = 105 °C | max 55 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in medium low drive mode; VDD = 1.7 V, TA = 25 °C, PDR OFF | typ 1.7 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in medium low drive mode; VDD = 2.4 V, TA = 25 °C, PDR OFF | typ 2.7 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in medium low drive mode; VDD = 3.3 V, TA = 25 °C; typical with PDR OFF | typ 3.5 · max 7 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in medium low drive mode; VDD = 3.3 V, TA = 85 °C | max 26 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in medium low drive mode; VDD = 3.3 V, TA = 105 °C | max 56 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in medium high drive mode; VDD = 1.7 V, TA = 25 °C, PDR OFF | typ 1.8 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in medium high drive mode; VDD = 2.4 V, TA = 25 °C, PDR OFF | typ 2.8 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in medium high drive mode; VDD = 3.3 V, TA = 25 °C; typical with PDR OFF | typ 3.6 · max 8 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in medium high drive mode; VDD = 3.3 V, TA = 85 °C | max 28 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in medium high drive mode; VDD = 3.3 V, TA = 105 °C | max 57 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in high drive mode; VDD = 1.7 V, TA = 25 °C, PDR OFF | typ 1.9 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in high drive mode; VDD = 2.4 V, TA = 25 °C, PDR OFF | typ 2.9 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in high drive mode; VDD = 3.3 V, TA = 25 °C; typical with PDR OFF | typ 3.7 · max 8 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in high drive mode; VDD = 3.3 V, TA = 85 °C | max 28 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in high drive mode; VDD = 3.3 V, TA = 105 °C | max 59 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in low drive mode; VDD = 1.7 V, TA = 25 °C, PDR OFF | typ 2.4 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in low drive mode; VDD = 2.4 V, TA = 25 °C, PDR OFF | typ 3.4 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in low drive mode; VDD = 3.3 V, TA = 25 °C; typical with PDR OFF | typ 4.3 · max 8 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in low drive mode; VDD = 3.3 V, TA = 85 °C | max 31 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in low drive mode; VDD = 3.3 V, TA = 105 °C | max 65 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in Medium low drive mode; VDD = 1.7 V, TA = 25 °C, PDR OFF | typ 2.4 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in Medium low drive mode; VDD = 2.4 V, TA = 25 °C, PDR OFF | typ 3.5 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in Medium low drive mode; VDD = 3.3 V, TA = 25 °C; typical with PDR OFF | typ 4.3 · max 8 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in Medium low drive mode; VDD = 3.3 V, TA = 85 °C | max 31 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in Medium low drive mode; VDD = 3.3 V, TA = 105 °C | max 65 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in Medium high drive mode; VDD = 1.7 V, TA = 25 °C, PDR OFF | typ 2.6 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in Medium high drive mode; VDD = 2.4 V, TA = 25 °C, PDR OFF | typ 3.7 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in Medium high drive mode; VDD = 3.3 V, TA = 25 °C; typical with PDR OFF | typ 4.5 · max 8 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in Medium high drive mode; VDD = 3.3 V, TA = 85 °C | max 33 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in Medium high drive mode; VDD = 3.3 V, TA = 105 °C | max 68 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in High drive mode; VDD = 1.7 V, TA = 25 °C, PDR OFF | typ 2.6 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in High drive mode; VDD = 2.4 V, TA = 25 °C, PDR OFF | typ 3.7 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in High drive mode; VDD = 3.3 V, TA = 25 °C; typical with PDR OFF | typ 4.5 · max 9 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in High drive mode; VDD = 3.3 V, TA = 85 °C | max 33 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in High drive mode; VDD = 3.3 V, TA = 105 °C | max 68 uA | 132 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | TA = +25 °C conforming to ANSI/ESDA/JEDEC JS-001-2012; class 2 | max 2000 V | 161 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | TA = +25 °C conforming to ANSI/ESD S5.3.1-2009, all the packages; class 3 | max 250 V | 161 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 216 MHz; typ at TA = 25 °C; max at TA = 85 °C | typ 193 · max 258 mA | 122 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 200 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 179 · max 279 mA | 122 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 180 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 159 · max 238 mA | 122 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 168 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 142 · max 211 mA | 122 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 144 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 122 · max 190 mA | 122 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 60 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 49 · max 103 mA | 122 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 25 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 23 · max 76 mA | 122 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 216 MHz; typ at TA = 25 °C; max at TA = 85 °C | typ 95 · max 153 mA | 122 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 200 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 88 · max 180 mA | 122 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 180 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 78 · max 147 mA | 122 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 168 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 70 · max 133 mA | 122 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 144 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 60 · max 123 mA | 122 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 60 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 24 · max 76 mA | 122 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 25 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 12 · max 63 mA | 122 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 216 MHz; typ at TA = 25 °C; max at TA = 85 °C | typ 190 · max 255 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 200 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 177 · max 268 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 180 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 157 · max 228 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 168 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 139 · max 204 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 144 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 107 · max 161 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 60 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 48 · max 98 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 25 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 23 · max 71 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 216 MHz; typ at TA = 25 °C; max at TA = 85 °C | typ 92 · max 150 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 200 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 86 · max 170 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 180 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 76 · max 140 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 168 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 67 · max 126 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 144 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 52 · max 101 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 60 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 23 · max 71 mA | 123 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 25 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 11 · max 56 mA | 123 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 200 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 177 · max 268 mA | 124 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 25 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 11 · max 59 mA | 124 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 216 MHz; typ at TA = 25 °C; max at TA = 85 °C | typ 190 · max 255 mA | 125 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 200 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 177 · max 268 mA | 125 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 180 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 160 · max 232 mA | 125 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 168 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 144 · max 209 mA | 125 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 144 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 115 · max 170 mA | 125 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 60 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 56 · max 107 mA | 125 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 25 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 27 · max 79 mA | 125 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 216 MHz; typ at TA = 25 °C; max at TA = 85 °C | typ 92 · max 150 mA | 125 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 200 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 86 · max 171 mA | 125 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 180 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 79 · max 144 mA | 125 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 168 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 71 · max 131 mA | 125 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 144 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 60 · max 110 mA | 125 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 60 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 32 · max 80 mA | 125 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 25 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 16 · max 64 mA | 125 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 216 MHz; typ at TA = 25 °C; max at TA = 85 °C | typ 176 · max 240 mA | 126 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 200 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 164 · max 255 mA | 126 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 180 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 149 · max 220 mA | 126 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 168 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 133 · max 198 mA | 126 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 144 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 106 · max 161 mA | 126 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 60 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 54 · max 105 mA | 126 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 25 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 27 · max 76 mA | 126 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 216 MHz; typ at TA = 25 °C; max at TA = 85 °C | typ 77 · max 135 mA | 126 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 200 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 72 · max 157 mA | 126 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 180 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 67 · max 131 mA | 126 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 168 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 60 · max 120 mA | 126 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 144 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 50 · max 101 mA | 126 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 60 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 29 · max 78 mA | 126 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 25 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 15 · max 63 mA | 126 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 216 MHz; typ at TA = 25 °C; max at TA = 85 °C | typ 215 · max 281 mA | 127 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 200 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 200 · max 293 mA | 127 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 180 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 185 · max 258 mA | 127 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 168 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 166 · max 233 mA | 127 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 144 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 134 · max 190 mA | 127 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 60 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 61 · max 112 mA | 127 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 25 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 29 · max 78 mA | 127 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 216 MHz; typ at TA = 25 °C; max at TA = 85 °C | typ 118 · max 177 mA | 127 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 200 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 110 · max 196 mA | 127 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 180 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 104 · max 170 mA | 127 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 168 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 94 · max 155 mA | 127 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 144 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 79 · max 130 mA | 127 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 60 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 37 · max 86 mA | 127 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 25 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 18 · max 66 mA | 127 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 216 MHz; typ at TA = 25 °C; max at TA = 85 °C | typ 191 · max 255 mA | 128 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 200 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 178 · max 269 mA | 128 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 180 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 164 · max 236 mA | 128 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 168 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 147 · max 212 mA | 128 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 144 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 121 · max 175 mA | 128 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 60 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 60 · max 111 mA | 128 |
| Supply current in RUN mode IDD | All peripherals enabled; fHCLK = 25 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 28 · max 77 mA | 128 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 216 MHz; typ at TA = 25 °C; max at TA = 85 °C | typ 93 · max 150 mA | 128 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 200 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 87 · max 171 mA | 128 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 180 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 83 · max 148 mA | 128 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 168 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 75 · max 134 mA | 128 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 144 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 65 · max 115 mA | 128 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 60 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 35 · max 84 mA | 128 |
| Supply current in RUN mode IDD | All peripherals disabled; fHCLK = 25 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 16 · max 64 mA | 128 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | V12; all peripherals enabled; fHCLK = 180 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 152 · max 220 mA | 129 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | V12; all peripherals enabled; fHCLK = 168 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 136 · max 198 mA | 129 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | V12; all peripherals enabled; fHCLK = 144 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 105 · max 158 mA | 129 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | V12; all peripherals enabled; fHCLK = 60 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 47 · max 96 mA | 129 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | V12; all peripherals enabled; fHCLK = 25 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 22 · max 70 mA | 129 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | V12; all peripherals disabled; fHCLK = 180 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 74 · max 136 mA | 129 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | V12; all peripherals disabled; fHCLK = 168 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 65 · max 123 mA | 129 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | V12; all peripherals disabled; fHCLK = 144 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 50 · max 100 mA | 129 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | V12; all peripherals disabled; fHCLK = 60 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 22 · max 70 mA | 129 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | V12; all peripherals disabled; fHCLK = 25 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 10 · max 58 mA | 129 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | V12; all peripherals disabled; fHCLK = 180 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 74 · max 137 mA | 129 |
| Supply current in Sleep mode IDD | All peripherals enabled; fHCLK = 216 MHz; typ at TA = 25 °C; max at TA = 85 °C | typ 128 · max 190 mA | 130 |
| Supply current in Sleep mode IDD | All peripherals enabled; fHCLK = 200 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 119 · max 214 mA | 130 |
| Supply current in Sleep mode IDD | All peripherals enabled; fHCLK = 180 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 105 · max 178 mA | 130 |
| Supply current in Sleep mode IDD | All peripherals enabled; fHCLK = 168 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 93 · max 156 mA | 130 |
| Supply current in Sleep mode IDD | All peripherals enabled; fHCLK = 144 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 72 · max 124 mA | 130 |
| Supply current in Sleep mode IDD | All peripherals enabled; fHCLK = 60 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 33 · max 82 mA | 130 |
| Supply current in Sleep mode IDD | All peripherals enabled; fHCLK = 25 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 17 · max 65 mA | 130 |
| Supply current in Sleep mode IDD | All peripherals disabled; fHCLK = 216 MHz; typ at TA = 25 °C; max at TA = 85 °C | typ 18 · max 71 mA | 130 |
| Supply current in Sleep mode IDD | All peripherals disabled; fHCLK = 200 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 17 · max 112 mA | 130 |
| Supply current in Sleep mode IDD | All peripherals disabled; fHCLK = 180 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 14 · max 75 mA | 130 |
| Supply current in Sleep mode IDD | All peripherals disabled; fHCLK = 168 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 13 · max 69 mA | 130 |
| Supply current in Sleep mode IDD | All peripherals disabled; fHCLK = 144 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 10 · max 58 mA | 130 |
| Supply current in Sleep mode IDD | All peripherals disabled; fHCLK = 60 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 6 · max 53 mA | 130 |
| Supply current in Sleep mode IDD | All peripherals disabled; fHCLK = 25 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 4 · max 51 mA | 130 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | Sleep mode; V12; all peripherals enabled; fHCLK = 180 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 102 · max 168 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | Sleep mode; V12; all peripherals enabled; fHCLK = 168 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 91 · max 152 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | Sleep mode; V12; all peripherals enabled; fHCLK = 144 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 71 · max 122 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | Sleep mode; V12; all peripherals enabled; fHCLK = 60 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 32 · max 81 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | Sleep mode; V12; all peripherals enabled; fHCLK = 25 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 16 · max 64 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | Sleep mode; V12; all peripherals disabled; fHCLK = 180 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 13 · max 73 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | Sleep mode; V12; all peripherals disabled; fHCLK = 168 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 12 · max 67 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | Sleep mode; V12; all peripherals disabled; fHCLK = 144 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 9 · max 56 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | Sleep mode; V12; all peripherals disabled; fHCLK = 60 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 5 · max 52 mA | 131 |
| Supply current in RUN mode from V12 and VDD supply IDD12 | Sleep mode; V12; all peripherals disabled; fHCLK = 25 MHz; typ at TA = 25 °C; max at TA = 105 °C | typ 3 · max 50 mA | 131 |
| Supply current in Stop mode, main regulator in Run mode IDD_STOP_NM | Normal mode; Flash memory in Stop mode, all oscillators OFF, no IWDG; typ at TA = 25 °C; max at VDD = 3.6 V, TA = 105 °C | typ 0.55 · max 27 mA | 131 |
| Supply current in Stop mode, main regulator in Run mode IDD_STOP_NM | Normal mode; Flash memory in Deep power down mode, all oscillators OFF; typ at TA = 25 °C; max at VDD = 3.6 V, TA = 105 °C | typ 0.5 · max 27 mA | 131 |
| Supply current in Stop mode, main regulator in Low-power mode IDD_STOP_NM | Normal mode; Flash memory in Stop mode, all oscillators OFF, no IWDG; typ at TA = 25 °C; max at VDD = 3.6 V, TA = 105 °C | typ 0.42 · max 24 mA | 131 |
| Supply current in Stop mode, main regulator in Low-power mode IDD_STOP_NM | Normal mode; Flash memory in Deep power down mode, all oscillators OFF, no IWDG; typ at TA = 25 °C; max at VDD = 3.6 V, TA = 105 °C | typ 0.37 · max 24 mA | 131 |
| Supply current in Stop mode, main regulator in Low voltage and under-drive modes IDD_STOP_UDM | Under-drive mode; regulator in Run mode, Flash memory in Deep power down mode, all oscillators OFF, no IWDG; typ at TA = 25 °C; max at VDD = 3.6 V, TA = 105 °C | typ 0.18 · max 10 mA | 131 |
| Supply current in Stop mode, main regulator in Low voltage and under-drive modes IDD_STOP_UDM | Under-drive mode; regulator in Low-power mode, Flash memory in Deep power down mode, all oscillators OFF, no IWDG; typ at TA = 25 °C; max at VDD = 3.6 V, TA = 105 °C | typ 0.13 · max 10 mA | 131 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC and LSE OFF; VDD = 1.7 V; TA = 25 °C | typ 1.1 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC and LSE OFF; VDD = 2.4 V; TA = 25 °C | typ 1.9 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC and LSE OFF; VDD = 3.3 V; typ at TA = 25 °C; max at TA = 105 °C | typ 2.4 · max 38 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC and LSE OFF; VDD = 1.7 V; TA = 25 °C | typ 1.9 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC and LSE OFF; VDD = 2.4 V; TA = 25 °C | typ 2.7 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC and LSE OFF; VDD = 3.3 V; typ at TA = 25 °C; max at TA = 105 °C | typ 3.2 · max 48 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in low drive mode; VDD = 1.7 V; TA = 25 °C | typ 1.7 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in low drive mode; VDD = 2.4 V; TA = 25 °C | typ 2.7 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in low drive mode; VDD = 3.3 V; typ at TA = 25 °C; max at TA = 105 °C | typ 3.5 · max 55 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in medium low drive mode; VDD = 1.7 V; TA = 25 °C | typ 1.7 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in medium low drive mode; VDD = 2.4 V; TA = 25 °C | typ 2.7 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in medium low drive mode; VDD = 3.3 V; typ at TA = 25 °C; max at TA = 105 °C | typ 3.5 · max 56 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in medium high drive mode; VDD = 1.7 V; TA = 25 °C | typ 1.8 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in medium high drive mode; VDD = 2.4 V; TA = 25 °C | typ 2.8 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in medium high drive mode; VDD = 3.3 V; typ at TA = 25 °C; max at TA = 105 °C | typ 3.6 · max 57 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in high drive mode; VDD = 1.7 V; TA = 25 °C | typ 1.9 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in high drive mode; VDD = 2.4 V; TA = 25 °C | typ 2.9 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE in high drive mode; VDD = 3.3 V; typ at TA = 25 °C; max at TA = 105 °C | typ 3.7 · max 59 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in low drive mode; VDD = 1.7 V; TA = 25 °C | typ 2.4 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in low drive mode; VDD = 2.4 V; TA = 25 °C | typ 3.4 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in low drive mode; VDD = 3.3 V; typ at TA = 25 °C; max at TA = 105 °C | typ 4.3 · max 65 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in Medium low drive mode; VDD = 1.7 V; TA = 25 °C | typ 2.4 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in Medium low drive mode; VDD = 2.4 V; TA = 25 °C | typ 3.5 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in Medium low drive mode; VDD = 3.3 V; typ at TA = 25 °C; max at TA = 105 °C | typ 4.3 · max 65 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in Medium high drive mode; VDD = 1.7 V; TA = 25 °C | typ 2.6 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in Medium high drive mode; VDD = 2.4 V; TA = 25 °C | typ 3.7 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in Medium high drive mode; VDD = 3.3 V; typ at TA = 25 °C; max at TA = 105 °C | typ 4.5 · max 68 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in High drive mode; VDD = 1.7 V; TA = 25 °C | typ 2.6 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in High drive mode; VDD = 2.4 V; TA = 25 °C | typ 3.7 uA | 132 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE in High drive mode; VDD = 3.3 V; typ at TA = 25 °C; max at TA = 105 °C | typ 4.5 · max 68 uA | 132 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC and LSE OFF; VBAT = 1.7 V; TA = 25 °C | typ 0.03 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC and LSE OFF; VBAT = 2.4 V; TA = 25 °C | typ 0.04 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC and LSE OFF; VBAT = 3.3 V; TA = 25 °C | typ 0.04 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC and LSE OFF; VBAT = 3.6 V; TA = 85 °C | max 0.2 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC and LSE OFF; VBAT = 3.6 V; TA = 105 °C | max 0.4 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC and LSE OFF; VBAT = 1.7 V; TA = 25 °C | typ 0.77 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC and LSE OFF; VBAT = 2.4 V; TA = 25 °C | typ 0.78 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC and LSE OFF; VBAT = 3.3 V; TA = 25 °C | typ 0.83 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC and LSE OFF; VBAT = 3.6 V; TA = 85 °C | max 3.2 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC and LSE OFF; VBAT = 3.6 V; TA = 105 °C | max 7.4 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in low drive mode; VBAT = 1.7 V; TA = 25 °C | typ 0.62 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in low drive mode; VBAT = 2.4 V; TA = 25 °C | typ 0.8 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in low drive mode; VBAT = 3.3 V; TA = 25 °C | typ 1.13 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in low drive mode; VBAT = 3.6 V; TA = 85 °C | max 4.4 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in low drive mode; VBAT = 3.6 V; TA = 105 °C | max 10.2 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in medium low drive mode; VBAT = 1.7 V; TA = 25 °C | typ 0.65 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in medium low drive mode; VBAT = 2.4 V; TA = 25 °C | typ 0.83 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in medium low drive mode; VBAT = 3.3 V; TA = 25 °C | typ 1.17 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in medium low drive mode; VBAT = 3.6 V; TA = 85 °C | max 4.6 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in medium low drive mode; VBAT = 3.6 V; TA = 105 °C | max 10.6 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in medium high drive mode; VBAT = 1.7 V; TA = 25 °C | typ 0.75 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in medium high drive mode; VBAT = 2.4 V; TA = 25 °C | typ 0.94 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in medium high drive mode; VBAT = 3.3 V; TA = 25 °C | typ 1.28 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in medium high drive mode; VBAT = 3.6 V; TA = 85 °C | max 5 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in medium high drive mode; VBAT = 3.6 V; TA = 105 °C | max 11.4 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in high drive mode; VBAT = 1.7 V; TA = 25 °C | typ 0.9 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in high drive mode; VBAT = 2.4 V; TA = 25 °C | typ 1.08 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in high drive mode; VBAT = 3.3 V; TA = 25 °C | typ 1.43 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in high drive mode; VBAT = 3.6 V; TA = 85 °C | max 5.5 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM OFF, RTC ON and LSE in high drive mode; VBAT = 3.6 V; TA = 105 °C | max 12.8 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in low drive mode; VBAT = 1.7 V; TA = 25 °C | typ 1.35 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in low drive mode; VBAT = 2.4 V; TA = 25 °C | typ 1.54 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in low drive mode; VBAT = 3.3 V; TA = 25 °C | typ 1.91 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in low drive mode; VBAT = 3.6 V; TA = 85 °C | max 7.3 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in low drive mode; VBAT = 3.6 V; TA = 105 °C | max 17.2 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in Medium low drive mode; VBAT = 1.7 V; TA = 25 °C | typ 1.38 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in Medium low drive mode; VBAT = 2.4 V; TA = 25 °C | typ 1.57 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in Medium low drive mode; VBAT = 3.3 V; TA = 25 °C | typ 1.93 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in Medium low drive mode; VBAT = 3.6 V; TA = 85 °C | max 7.9 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in Medium low drive mode; VBAT = 3.6 V; TA = 105 °C | max 18.4 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in Medium high drive mode; VBAT = 1.7 V; TA = 25 °C | typ 1.53 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in Medium high drive mode; VBAT = 2.4 V; TA = 25 °C | typ 1.73 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in Medium high drive mode; VBAT = 3.3 V; TA = 25 °C | typ 2.11 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in Medium high drive mode; VBAT = 3.6 V; TA = 85 °C | max 8 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in Medium high drive mode; VBAT = 3.6 V; TA = 105 °C | max 18.7 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in High drive mode; VBAT = 1.7 V; TA = 25 °C | typ 1.67 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in High drive mode; VBAT = 2.4 V; TA = 25 °C | typ 1.87 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in High drive mode; VBAT = 3.3 V; TA = 25 °C | typ 2.26 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in High drive mode; VBAT = 3.6 V; TA = 85 °C | max 9 uA | 133 |
| Supply current in VBAT mode IDD_VBAT | Backup SRAM ON, RTC ON and LSE in High drive mode; VBAT = 3.6 V; TA = 105 °C | max 21 uA | 133 |
| I/O switching Current IDDIO | CEXT = 0 pF; C = CINT + CS + CEXT; fsw = 2 MHz; VDD = 3.3 V | typ 0.1 mA | 134 |
| I/O switching Current IDDIO | CEXT = 0 pF; C = CINT + CS + CEXT; fsw = 2 MHz; VDD = 1.8 V | typ 0.1 mA | 134 |
| I/O switching Current IDDIO | CEXT = 0 pF; C = CINT + CS + CEXT; fsw = 8 MHz; VDD = 3.3 V | typ 0.4 mA | 134 |
| I/O switching Current IDDIO | CEXT = 0 pF; C = CINT + CS + CEXT; fsw = 8 MHz; VDD = 1.8 V | typ 0.2 mA | 134 |
| I/O switching Current IDDIO | CEXT = 0 pF; C = CINT + CS + CEXT; fsw = 25 MHz; VDD = 3.3 V | typ 1.1 mA | 134 |
| I/O switching Current IDDIO | CEXT = 0 pF; C = CINT + CS + CEXT; fsw = 25 MHz; VDD = 1.8 V | typ 0.7 mA | 134 |
| I/O switching Current IDDIO | CEXT = 0 pF; C = CINT + CS + CEXT; fsw = 50 MHz; VDD = 3.3 V | typ 2.4 mA | 134 |
| I/O switching Current IDDIO | CEXT = 0 pF; C = CINT + CS + CEXT; fsw = 50 MHz; VDD = 1.8 V | typ 1.3 mA | 134 |
| I/O switching Current IDDIO | CEXT = 0 pF; C = CINT + CS + CEXT; fsw = 60 MHz; VDD = 3.3 V | typ 3.1 mA | 134 |
| I/O switching Current IDDIO | CEXT = 0 pF; C = CINT + CS + CEXT; fsw = 60 MHz; VDD = 1.8 V | typ 1.6 mA | 134 |
| I/O switching Current IDDIO | CEXT = 0 pF; C = CINT + CS + CEXT; fsw = 84 MHz; VDD = 3.3 V | typ 4.3 mA | 134 |
| I/O switching Current IDDIO | CEXT = 0 pF; C = CINT + CS + CEXT; fsw = 84 MHz; VDD = 1.8 V | typ 2.4 mA | 134 |
| I/O switching Current IDDIO | CEXT = 0 pF; C = CINT + CS + CEXT; fsw = 90 MHz; VDD = 3.3 V | typ 4.9 mA | 134 |
| I/O switching Current IDDIO | CEXT = 0 pF; C = CINT + CS + CEXT; fsw = 90 MHz; VDD = 1.8 V | typ 2.6 mA | 134 |
| I/O switching Current IDDIO | CEXT = 0 pF; C = CINT + CS + CEXT; fsw = 100 MHz; VDD = 3.3 V | typ 5.4 mA | 134 |
| I/O switching Current IDDIO | CEXT = 0 pF; C = CINT + CS + CEXT; fsw = 100 MHz; VDD = 1.8 V | typ 2.8 mA | 134 |
| I/O switching Current IDDIO | CEXT = 10 pF; C = CINT + CS + CEXT; fsw = 2 MHz; VDD = 3.3 V | typ 0.2 mA | 134 |
| I/O switching Current IDDIO | CEXT = 10 pF; C = CINT + CS + CEXT; fsw = 2 MHz; VDD = 1.8 V | typ 0.1 mA | 134 |
| I/O switching Current IDDIO | CEXT = 10 pF; C = CINT + CS + CEXT; fsw = 8 MHz; VDD = 3.3 V | typ 0.6 mA | 134 |
| I/O switching Current IDDIO | CEXT = 10 pF; C = CINT + CS + CEXT; fsw = 8 MHz; VDD = 1.8 V | typ 0.3 mA | 134 |
| I/O switching Current IDDIO | CEXT = 10 pF; C = CINT + CS + CEXT; fsw = 25 MHz; VDD = 3.3 V | typ 1.8 mA | 134 |
| I/O switching Current IDDIO | CEXT = 10 pF; C = CINT + CS + CEXT; fsw = 25 MHz; VDD = 1.8 V | typ 1.1 mA | 134 |
| I/O switching Current IDDIO | CEXT = 10 pF; C = CINT + CS + CEXT; fsw = 50 MHz; VDD = 3.3 V | typ 3.1 mA | 134 |
| I/O switching Current IDDIO | CEXT = 10 pF; C = CINT + CS + CEXT; fsw = 50 MHz; VDD = 1.8 V | typ 2.3 mA | 134 |
| I/O switching Current IDDIO | CEXT = 10 pF; C = CINT + CS + CEXT; fsw = 60 MHz; VDD = 3.3 V | typ 4.6 mA | 134 |
| I/O switching Current IDDIO | CEXT = 10 pF; C = CINT + CS + CEXT; fsw = 60 MHz; VDD = 1.8 V | typ 3.4 mA | 134 |
| I/O switching Current IDDIO | CEXT = 10 pF; C = CINT + CS + CEXT; fsw = 84 MHz; VDD = 3.3 V | typ 9.7 mA | 134 |
| I/O switching Current IDDIO | CEXT = 10 pF; C = CINT + CS + CEXT; fsw = 84 MHz; VDD = 1.8 V | typ 3.6 mA | 134 |
| I/O switching Current IDDIO | CEXT = 10 pF; C = CINT + CS + CEXT; fsw = 90 MHz; VDD = 3.3 V | typ 10.12 mA | 134 |
| I/O switching Current IDDIO | CEXT = 10 pF; C = CINT + CS + CEXT; fsw = 90 MHz; VDD = 1.8 V | typ 5.2 mA | 134 |
| I/O switching Current IDDIO | CEXT = 10 pF; C = CINT + CS + CEXT; fsw = 100 MHz; VDD = 3.3 V | typ 14.92 mA | 134 |
| I/O switching Current IDDIO | CEXT = 10 pF; C = CINT + CS + CEXT; fsw = 100 MHz; VDD = 1.8 V | typ 5.4 mA | 134 |
| I/O switching Current IDDIO | CEXT = 22 pF; C = CINT + CS + CEXT; fsw = 2 MHz; VDD = 3.3 V | typ 0.3 mA | 135 |
| I/O switching Current IDDIO | CEXT = 22 pF; C = CINT + CS + CEXT; fsw = 2 MHz; VDD = 1.8 V | typ 0.1 mA | 135 |
| I/O switching Current IDDIO | CEXT = 22 pF; C = CINT + CS + CEXT; fsw = 8 MHz; VDD = 3.3 V | typ 1 mA | 135 |
| I/O switching Current IDDIO | CEXT = 22 pF; C = CINT + CS + CEXT; fsw = 8 MHz; VDD = 1.8 V | typ 0.5 mA | 135 |
| I/O switching Current IDDIO | CEXT = 22 pF; C = CINT + CS + CEXT; fsw = 25 MHz; VDD = 3.3 V | typ 3.5 mA | 135 |
| I/O switching Current IDDIO | CEXT = 22 pF; C = CINT + CS + CEXT; fsw = 25 MHz; VDD = 1.8 V | typ 1.6 mA | 135 |
| I/O switching Current IDDIO | CEXT = 22 pF; C = CINT + CS + CEXT; fsw = 50 MHz; VDD = 3.3 V | typ 5.9 mA | 135 |
| I/O switching Current IDDIO | CEXT = 22 pF; C = CINT + CS + CEXT; fsw = 50 MHz; VDD = 1.8 V | typ 4.2 mA | 135 |
| I/O switching Current IDDIO | CEXT = 22 pF; C = CINT + CS + CEXT; fsw = 60 MHz; VDD = 3.3 V | typ 10 mA | 135 |
| I/O switching Current IDDIO | CEXT = 22 pF; C = CINT + CS + CEXT; fsw = 60 MHz; VDD = 1.8 V | typ 4.4 mA | 135 |
| I/O switching Current IDDIO | CEXT = 22 pF; C = CINT + CS + CEXT; fsw = 84 MHz; VDD = 3.3 V | typ 19.12 mA | 135 |
| I/O switching Current IDDIO | CEXT = 22 pF; C = CINT + CS + CEXT; fsw = 84 MHz; VDD = 1.8 V | typ 5.8 mA | 135 |
| I/O switching Current IDDIO | CEXT = 22 pF; C = CINT + CS + CEXT; fsw = 90 MHz; VDD = 3.3 V | typ 19.6 mA | 135 |
| I/O switching Current IDDIO | CEXT = 33 pF; C = CINT + CS + CEXT; fsw = 2 MHz; VDD = 3.3 V | typ 0.3 mA | 135 |
| I/O switching Current IDDIO | CEXT = 33 pF; C = CINT + CS + CEXT; fsw = 2 MHz; VDD = 1.8 V | typ 0.2 mA | 135 |
| I/O switching Current IDDIO | CEXT = 33 pF; C = CINT + CS + CEXT; fsw = 8 MHz; VDD = 3.3 V | typ 1.3 mA | 135 |
| I/O switching Current IDDIO | CEXT = 33 pF; C = CINT + CS + CEXT; fsw = 8 MHz; VDD = 1.8 V | typ 0.7 mA | 135 |
| I/O switching Current IDDIO | CEXT = 33 pF; C = CINT + CS + CEXT; fsw = 25 MHz; VDD = 3.3 V | typ 3.5 mA | 135 |
| I/O switching Current IDDIO | CEXT = 33 pF; C = CINT + CS + CEXT; fsw = 25 MHz; VDD = 1.8 V | typ 2.3 mA | 135 |
| I/O switching Current IDDIO | CEXT = 33 pF; C = CINT + CS + CEXT; fsw = 50 MHz; VDD = 3.3 V | typ 10.26 mA | 135 |
| I/O switching Current IDDIO | CEXT = 33 pF; C = CINT + CS + CEXT; fsw = 50 MHz; VDD = 1.8 V | typ 5.19 mA | 135 |
| I/O switching Current IDDIO | CEXT = 33 pF; C = CINT + CS + CEXT; fsw = 60 MHz; VDD = 3.3 V | typ 16.53 mA | 135 |
| TIM1 IDD | APB2; Scale 1 | typ 24.1 uA/MHz | 138 |
| TIM1 IDD | APB2; Scale 2 | typ 23.8 uA/MHz | 138 |
| TIM1 IDD | APB2; Scale 3 | typ 19.6 uA/MHz | 138 |
| TIM8 IDD | APB2; Scale 1 | typ 24.5 uA/MHz | 138 |
| TIM8 IDD | APB2; Scale 2 | typ 24.2 uA/MHz | 138 |
| TIM8 IDD | APB2; Scale 3 | typ 20 uA/MHz | 138 |
| USART1 IDD | APB2; Scale 1 | typ 17.7 uA/MHz | 138 |
| USART1 IDD | APB2; Scale 2 | typ 17.4 uA/MHz | 138 |
| USART1 IDD | APB2; Scale 3 | typ 14.3 uA/MHz | 138 |
| USART6 IDD | APB2; Scale 1 | typ 11.9 uA/MHz | 138 |
| USART6 IDD | APB2; Scale 2 | typ 11.8 uA/MHz | 138 |
| USART6 IDD | APB2; Scale 3 | typ 9.4 uA/MHz | 138 |
| ADC1 IDD | APB2; Scale 1; additional analog consumption is specified separately | typ 4.5 uA/MHz | 138 |
| ADC1 IDD | APB2; Scale 2; additional analog consumption is specified separately | typ 4.7 uA/MHz | 138 |
| ADC1 IDD | APB2; Scale 3; additional analog consumption is specified separately | typ 3.5 uA/MHz | 138 |
| ADC2 IDD | APB2; Scale 1; additional analog consumption is specified separately | typ 4.5 uA/MHz | 138 |
| ADC2 IDD | APB2; Scale 2; additional analog consumption is specified separately | typ 4.7 uA/MHz | 138 |
| ADC2 IDD | APB2; Scale 3; additional analog consumption is specified separately | typ 3.3 uA/MHz | 138 |
| ADC3 IDD | APB2; Scale 1; additional analog consumption is specified separately | typ 4.5 uA/MHz | 138 |
| ADC3 IDD | APB2; Scale 2; additional analog consumption is specified separately | typ 4.6 uA/MHz | 138 |
| ADC3 IDD | APB2; Scale 3; additional analog consumption is specified separately | typ 3.3 uA/MHz | 138 |
| SDMMC1 IDD | APB2; Scale 1 | typ 8.4 uA/MHz | 138 |
| SDMMC1 IDD | APB2; Scale 2 | typ 8.3 uA/MHz | 138 |
| SDMMC1 IDD | APB2; Scale 3 | typ 6.9 uA/MHz | 138 |
| SDMMC2 IDD | APB2; Scale 1 | typ 8.2 uA/MHz | 138 |
| SDMMC2 IDD | APB2; Scale 2 | typ 8.2 uA/MHz | 138 |
| SDMMC2 IDD | APB2; Scale 3 | typ 6.4 uA/MHz | 138 |
| SPI1/I2S1 IDD | APB2; Scale 1 | typ 3.9 uA/MHz | 138 |
| SPI1/I2S1 IDD | APB2; Scale 2 | typ 3.6 uA/MHz | 138 |
| SPI1/I2S1 IDD | APB2; Scale 3 | typ 3.1 uA/MHz | 138 |
| SPI4 IDD | APB2; Scale 1 | typ 3.9 uA/MHz | 138 |
| SPI4 IDD | APB2; Scale 2 | typ 3.6 uA/MHz | 138 |
| SPI4 IDD | APB2; Scale 3 | typ 3.1 uA/MHz | 138 |
| SYSCFG IDD | APB2; Scale 1 | typ 2.5 uA/MHz | 138 |
| SYSCFG IDD | APB2; Scale 2 | typ 2.2 uA/MHz | 138 |
| SYSCFG IDD | APB2; Scale 3 | typ 1.9 uA/MHz | 138 |
| TIM9 IDD | APB2; Scale 1 | typ 8 uA/MHz | 138 |
| TIM9 IDD | APB2; Scale 2 | typ 8 uA/MHz | 138 |
| TIM9 IDD | APB2; Scale 3 | typ 6.2 uA/MHz | 138 |
| TIM10 IDD | APB2; Scale 1 | typ 5 uA/MHz | 138 |
| TIM10 IDD | APB2; Scale 2 | typ 5.1 uA/MHz | 138 |
| TIM10 IDD | APB2; Scale 3 | typ 3.7 uA/MHz | 138 |
| TIM11 IDD | APB2; Scale 1 | typ 6.9 uA/MHz | 138 |
| TIM11 IDD | APB2; Scale 2 | typ 6.9 uA/MHz | 138 |
| TIM11 IDD | APB2; Scale 3 | typ 5.3 uA/MHz | 138 |
| SPI5 IDD | APB2; Scale 1 | typ 2.7 uA/MHz | 138 |
| SPI5 IDD | APB2; Scale 2 | typ 2.8 uA/MHz | 138 |
| SPI5 IDD | APB2; Scale 3 | typ 1.8 uA/MHz | 138 |
| SPI6 IDD | APB2; Scale 1 | typ 3.1 uA/MHz | 138 |
| SPI6 IDD | APB2; Scale 2 | typ 3.2 uA/MHz | 138 |
| SPI6 IDD | APB2; Scale 3 | typ 2.2 uA/MHz | 138 |
| SAI1 IDD | APB2; Scale 1 | typ 3.2 uA/MHz | 138 |
| SAI1 IDD | APB2; Scale 2 | typ 3.3 uA/MHz | 138 |
| SAI1 IDD | APB2; Scale 3 | typ 2.2 uA/MHz | 138 |
| DFSDM1 IDD | APB2; Scale 1 | typ 10.9 uA/MHz | 138 |
| DFSDM1 IDD | APB2; Scale 2 | typ 10.7 uA/MHz | 138 |
| DFSDM1 IDD | APB2; Scale 3 | typ 9 uA/MHz | 138 |
| SAI2 IDD | APB2; Scale 1 | typ 3.9 uA/MHz | 138 |
| SAI2 IDD | APB2; Scale 2 | typ 3.9 uA/MHz | 138 |
| SAI2 IDD | APB2; Scale 3 | typ 2.8 uA/MHz | 138 |
| MDIO IDD | APB2; Scale 1 | typ 7.1 uA/MHz | 138 |
| MDIO IDD | APB2; Scale 2 | typ 7 uA/MHz | 138 |
| MDIO IDD | APB2; Scale 3 | typ 5.8 uA/MHz | 138 |
| LTDC IDD | APB2; Scale 1 | typ 51.2 uA/MHz | 138 |
| LTDC IDD | APB2; Scale 2 | typ 50.3 uA/MHz | 138 |
| LTDC IDD | APB2; Scale 3 | typ 41.8 uA/MHz | 138 |
| Oscillator frequency fOSC_IN | min 4 · max 26 MHz | 142 | |
| Feedback resistor RF | typ 200 kΩ | 142 | |
| HSE current consumption IDD | VDD=3.3 V, ESR=30 Ω, CL=5 pF@25 MHz | typ 450 uA | 142 |
| HSE current consumption IDD | VDD=3.3 V, ESR=30 Ω, CL=10 pF@25 MHz | typ 530 uA | 142 |
| HSE accuracy ACCHSE | min -500 · max 500 ppm | 142 | |
| Maximum critical crystal gm Gm_crit_max | Startup | max 1 mA/V | 142 |
| Startup time tSU(HSE) | VDD is stabilized | typ 2 ms | 142 |
| LSE current consumption IDD | LSEDRV[1:0]=00, Low drive capability | typ 250 nA | 143 |
| LSE current consumption IDD | LSEDRV[1:0]=10, Medium low drive capability | typ 300 nA | 143 |
| LSE current consumption IDD | LSEDRV[1:0]=01, Medium high drive capability | typ 370 nA | 143 |
| LSE current consumption IDD | LSEDRV[1:0]=11, High drive capability | typ 480 nA | 143 |
| PLL power consumption on VDD12 IDD(PLL) | fVCO_OUT = 500 MHz | typ 0.55 · max 0.7 mA | 155 |
| PLL power consumption on VDD12 IDD(PLL) | fVCO_OUT = 600 MHz | typ 0.65 · max 0.8 mA | 155 |
| PLL power consumption on VDD12 IDD(PLL) | fVCO_OUT = 1000 MHz | typ 0.95 · max 1.2 mA | 155 |
| 1.2 V internal voltage on VDD12DSI VDD12DSI | min 1.15 · typ 1.2 · max 1.3 V | 155 | |
| External capacitor on VCAPDSI CEXT | min 1.1 · typ 2.2 · max 3.3 uF | 155 | |
| External Serial Resistor ESR | min 0 · typ 25 · max 600 mΩ | 155 | |
| Regulator power consumption IDDDSIREG | min 100 · typ 120 · max 125 uA | 155 | |
| DSI system (regulator, PLL and D-PHY) current consumption on VDDDSI IDDDSI | Ultra Low Power Mode (Reg. ON + PLL OFF) | typ 290 · max 600 uA | 155 |
| DSI system (regulator, PLL and D-PHY) current consumption on VDDDSI IDDDSI | Stop State (Reg. ON + PLL OFF) | typ 290 · max 600 uA | 155 |
| DSI system current consumption on VDDDSI in LP mode communication IDDDSILP | 10 MHz escape clock (Reg. ON + PLL OFF) | typ 4.3 · max 5 mA | 155 |
| DSI system current consumption on VDDDSI in LP mode communication IDDDSILP | 20 MHz escape clock (Reg. ON + PLL OFF) | typ 4.3 · max 5 mA | 155 |
| DSI system (regulator, PLL and D-PHY) current consumption on VDDDSI in HS mode communication IDDDSIHS | 300 Mbps - 1 data lane (Reg. ON + PLL ON) | typ 8 · max 8.8 mA | 155 |
| DSI system (regulator, PLL and D-PHY) current consumption on VDDDSI in HS mode communication IDDDSIHS | 300 Mbps - 2data lane (Reg. ON + PLL ON) | typ 11.4 · max 12.5 mA | 155 |
| DSI system (regulator, PLL and D-PHY) current consumption on VDDDSI in HS mode communication IDDDSIHS | 500 Mbps - 1 data lane (Reg. ON + PLL ON) | typ 13.5 · max 14.7 mA | 155 |
| DSI system (regulator, PLL and D-PHY) current consumption on VDDDSI in HS mode communication IDDDSIHS | 500 Mbps - 2data lane (Reg. ON + PLL ON) | typ 18 · max 19.6 mA | 155 |
| DSI system (regulator, PLL and D-PHY) current consumption on VDDDSI in HS mode with CLK like payload IDDDSIHS | 500 Mbps - 2data lane (Reg. ON + PLL ON) | typ 21.4 · max 23.3 mA | 155 |
| Startup delay tWAKEUP | CEXT = 2.2 uF | typ 110 us | 155 |
| Startup delay tWAKEUP | CEXT = 3.3 uF | max 160 us | 155 |
| Inrush current on VDDDSI IINRUSH | External capacitor load at start | typ 60 · max 200 mA | 155 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | TA = +25 °C conforming to ANSI/ESDA/JEDEC JS-001-2012; Class 2 | max 2000 V | 161 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | TA = +25 °C conforming to ANSI/ESD S5.3.1-2009, all the packages; Class 3 | max 250 V | 161 |
| Output low level voltage for an I/O pin VOL | CMOS port; IIO = +8 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 165 |
| Output low level voltage for an I/O pin VOL | TTL port; IIO = +8 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 165 |
| Output high level voltage for an I/O pin except PC14 VOH | TTL port; IIO = -8 mA; 2.7 V ≤ VDD ≤ 3.6 V | min 2.4 V | 165 |
| Output low level voltage for an I/O pin VOL | IIO = +20 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 1.3 V | 165 |
| Output low level voltage for an I/O pin VOL | IIO = +6 mA; 1.8 V ≤ VDD ≤ 3.6 V | max 0.4 V | 165 |
| Output low level voltage for an I/O pin VOL | IIO = +4 mA; 1.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 165 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDD ≥ 2.7 V | max 100 MHz | 167 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDD ≥ 1.8 V | max 50 MHz | 167 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDD ≥ 1.7 V | max 42.5 MHz | 167 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 10 pF, VDD ≥ 2.7 V | max 180 MHz | 167 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 10 pF, VDD ≥ 1.8 V | max 100 MHz | 167 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 10 pF, VDD ≥ 1.7 V | max 72.5 MHz | 167 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDD ≥ 2.7 V | max 4 ns | 167 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDD ≥ 1.8 V | max 6 ns | 167 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDD ≥ 1.7 V | max 7 ns | 167 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 11; CL = 10 pF, VDD ≥ 2.7 V | max 2.5 ns | 167 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 11; CL = 10 pF, VDD ≥ 1.8 V | max 3.5 ns | 167 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 11; CL = 10 pF, VDD ≥ 1.7 V | max 4 ns | 167 |
| Pulse width of external signals detected by the EXTI controller tEXTIpw | min 10 ns | 167 | |
| Timer resolution time tres(TIM) | AHB/APBx prescaler=1 or 2 or 4, fTIMxCLK = 216 MHz | min 1 tTIMxCLK | 169 |
| Timer resolution time tres(TIM) | AHB/APBx prescaler>4, fTIMxCLK = 100 MHz | min 1 tTIMxCLK | 169 |
| Timer external clock frequency on CH1 to CH4 fEXT | fTIMxCLK = 216 MHz; maximum fTIMxCLK/2 | min 0 MHz | 169 |
| fPCLK1/RTCCLK frequency ratio | Any read/write operation from/to an RTC register | min 4 | 169 |
| Power supply VDDA | min 1.7 · max 3.6 V | 169 | |
| Positive reference voltage VREF+ | VDDA − VREF+ < 1.2 V; maximum VDDA | min 1.7 V | 169 |
| ADC clock frequency fADC | VDDA = 1.7 to 2.4 V | min 0.6 · typ 15 · max 18 MHz | 169 |
| ADC clock frequency fADC | VDDA = 2.4 to 3.6 V | min 0.6 · typ 30 · max 36 MHz | 169 |
| VSENSE linearity with temperature TL | Typical ±1 °C; maximum ±2 °C | typ 1 · max 2 °C | 175 |
| Average slope Avg_Slope | typ 2.5 mV/°C | 175 | |
| Voltage at 25 °C V25 | typ 0.76 V | 175 | |
| Startup time tSTART | typ 6 · max 10 us | 175 | |
| ADC sampling time when reading the temperature (1 °C accuracy) TS_temp | min 10 us | 175 | |
| Resistor bridge for VBAT R | typ 50 KΩ | 175 | |
| Ratio on VBAT measurement Q | typ 4 | 175 | |
| Error on Q Er | min -1 · max 1 % | 175 | |
| ADC sampling time when reading the VBAT TS_vbat | 1 mV accuracy | min 5 us | 175 |
| Internal reference voltage VREFINT | –40 °C < TA < +105 °C | min 1.18 · typ 1.21 · max 1.24 V | 175 |
| ADC sampling time when reading the internal reference voltage TS_vrefint | min 10 us | 175 | |
| Internal reference voltage spread over the temperature range VRERINT_s | VDD = 3V ± 10mV | typ 3 · max 5 mV | 175 |
| Temperature coefficient TCoeff | typ 30 · max 50 ppm/°C | 176 | |
| Startup time tSTART | typ 6 · max 10 us | 176 | |
| Analog supply voltage VDDA | min 1.7 · max 3.6 V | 176 | |
| Reference supply voltage VREF+ | VREF+ ≤ VDDA | min 1.7 · max 3.6 V | 176 |
| Ground VSSA | min 0 · max 0 V | 176 | |
| Resistive load with buffer ON RLOAD | min 5 kΩ | 176 | |
| Impedance output with buffer OFF RO | When the buffer is OFF, minimum resistive load between DAC_OUT and VSS for 1% accuracy is 1.5 MΩ | max 15 kΩ | 176 |
| Capacitive load CLOAD | Maximum capacitive load at DAC_OUT pin when buffer is ON | max 50 pF | 176 |
| Lower DAC_OUT voltage with buffer ON DAC_OUT min | min 0.2 V | 176 | |
| Lower DAC_OUT voltage with buffer OFF DAC_OUT min | typ 0.5 mV | 176 | |
| DAC DC VREF current consumption in quiescent mode (Standby mode) IVREF+ | With no load, worst code (0x800) at VREF+ = 3.6 V in terms of DC consumption on the inputs | typ 170 · max 240 uA | 176 |
| DAC DC VREF current consumption in quiescent mode (Standby mode) IVREF+ | With no load, worst code (0xF1C) at VREF+ = 3.6 V in terms of DC consumption on the inputs | typ 50 · max 75 uA | 176 |
| RPD RPD | PA11, PA12, PB14, PB15 (USB_FS_DP/DM, USB_HS_DP/DM); VIN = VDD | min 17 · typ 21 · max 24 kΩ | 190 |
| RPD RPD | PA9, PB13 (OTG_FS_VBUS, OTG_HS_VBUS); VIN = VDD | min 2.4 · typ 5.2 · max 8 kΩ | 190 |
| RPU RPU | PA12, PB15 (USB_FS_DP, USB_HS_DP); VIN = VSS | min 1.5 · typ 1.8 · max 2.1 kΩ | 190 |
| RPU RPU | PA9, PB13 (OTG_FS_VBUS, OTG_HS_VBUS); VIN = VSS | min 0.55 · typ 0.95 · max 1.35 kΩ | 190 |
| Rise time tr | CL = 50 pF | min 4 · max 20 ns | 190 |
| Fall time tf | CL = 50 pF | min 4 · max 20 ns | 190 |
| Rise/ fall time matching trfm | tr/tf | min 90 · max 110 % | 190 |
| Output signal crossover voltage VCRS | min 1.3 · max 2 V | 190 | |
| Output driver impedance ZDRV | Driving high or low | min 28 · max 44 Ω | 190 |
Open-source boards using it
5- 2 layers74.4 × 57.6 mm

- 6 layers46 × 46 mm

TritonECU MCU
alpauna/TritonECU
ESP32-S3 engine control unit — fuel injection, ignition timing, wideband O2 (CJ125/LSU 4.9), dashboard, and MQTT telemetry
38 parts10 - 4 layers97.3 × 90.3 mm

- 4 layers99.2 × 56.5 mm

- 4 layers391.2 × 260.6 mm

Parts like it
8STM32H743ZIT6
LQFP-144(20x20)-40℃~+85℃ 1.62V~3.6V 114 12bit 16bit 1MB 2MB 32 Bit 480MHz ARM Cortex-M7 Built-in FLASH LQFP-144(20x20) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)GD32F470ZGT6
LQFP-144(20x20)114 12bit 12bit 1MB 240MHz ARM Cortex-M4 FLASH LQFP-144(20x20) Microcontrollers (MCU/MPU/SOC) ROHSGigaDevice Semicon BeijingMicrocontrollers (MCU/MPU/SOC)GD32F470ZIT6
LQFP-144(20x20)114 12bit 12bit 240MHz 2MB ARM Cortex-M4 FLASH LQFP-144(20x20) Microcontrollers (MCU/MPU/SOC) ROHSGigaDevice Semicon BeijingMicrocontrollers (MCU/MPU/SOC)STM32H753ZIT6
LQFP-144(20x20)-40℃~+85℃ 1.62V~3.6V 114 12bit 16bit 1MB 2MB 32 Bit 480MHz ARM Cortex-M7 Built-in FLASH LQFP-144(20x20) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)AT32F435ZGT7
LQFP-144(20x20)-40℃~+105℃ 116 1MB 288MHz 384KB、512KB ARM Cortex-M4F LQFP-144(20x20) Microcontrollers (MCU/MPU/SOC) ROHSARTERYMicrocontrollers (MCU/MPU/SOC)GD32F470ZKT6
LQFP-144(20x20)114 12bit 12bit 240MHz 2MB ARM Cortex-M4 FLASH LQFP-144(20x20) Microcontrollers (MCU/MPU/SOC) ROHSGigaDevice Semicon BeijingMicrocontrollers (MCU/MPU/SOC)STM32H750ZBT6
LQFP-144(20x20)-40℃~+85℃ 1.62V~3.6V 114 128KB 12bit 16bit 1MB 32 Bit 480MHz ARM Cortex-M7 Built-in FLASH LQFP-144(20x20) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)HC32F4A0RGTB-LQFP144
LQFP-144(20x20)LQFP-144(20x20) Microcontrollers (MCU/MPU/SOC) ROHSXHSCMicrocontrollers (MCU/MPU/SOC)
Questions
Is there a KiCad symbol and footprint for the STM32F767ZIT6?
Yes. The symbol is MCU_ST_STM32F7:STM32F767ZITx and the footprint Package_QFP:LQFP-144_20x20mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the STM32F767ZIT6?
LQFP-144(20x20), with 144 pins. Its footprint is drawn on this page.
Where is the STM32F767ZIT6 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the STM32F767ZIT6?
JLCPCB lists it as part C90235, with 118 in stock; the sellers' links on this page open their listings.
What can replace the STM32F767ZIT6?
Parts like it in the library: the STM32H743ZIT6 by STMicroelectronics, the GD32F470ZGT6 by GigaDevice Semicon Beijing, the GD32F470ZIT6 by GigaDevice Semicon Beijing and the STM32H753ZIT6 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the STM32F767ZIT6?
5 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.