Skip to the content

STM32F446VET6

STMicroelectronicsExtended

-40℃~+85℃ 1.7V~3.6V 128KB 12bit 12bit 180MHz 32 Bit 512KB 81 ARM Cortex-M4 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHS

Part id
st/STM32F446VET6
Category
Microcontrollers (MCU, MPU, SOC)
Package
LQFP-100(14x14)
Pins
100
In stock
854 at JLCPCB (C91929)
Used on
3 open-source boards

Overview

The STM32F446VET6 is a microcontroller made by STMicroelectronics in a LQFP-100(14x14) package with 100 pins. -40℃~+85℃ 1.7V~3.6V 128KB 12bit 12bit 180MHz 32 Bit 512KB 81 ARM Cortex-M4 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_ST_STM32F4:STM32F446VETx, from KiCad's library) and its footprint (Package_QFP:LQFP-100_14x14mm_P0.5mm, from KiCad's library), ready for a KiCad board. 854 are in stock at JLCPCB (part C91929). 3 open-source boards in 2 repositories on GitHub use it.

Symbol

1PE22PE33PE44PE55PE66VBAT7PC138PC149PC1510VSS11VDD12PH013PH114NRST15PC016PC117PC218PC319VDD20VSSA21VREF+22VDDA23PA024PA125PA226PA328VDD29PA430PA531PA632PA733PC434PC535PB036PB137PB238PE739PE840PE941PE1042PE1143PE1244PE1345PE1446PE1547PB1048VCAP_150VDD51PB1252PB1353PB1454PB1555PD856PD957PD1058PD1159PD1260PD1361PD1462PD1563PC664PC765PC866PC967PA868PA969PA1070PA1171PA1272PA1373VCAP_275VDD76PA1477PA1578PC1079PC1180PC1281PD082PD183PD284PD385PD486PD587PD688PD789PB390PB491PB592PB693PB794BOOT095PB896PB997PE098PE1100VDD
MCU_ST_STM32F4:STM32F446VETxFrom KiCad's library

Footprint

Package_QFP:LQFP-100_14x14mm_P0.5mmFrom KiCad's library

From the datasheet

17
Supply, least
1.7 V · VDD, recommended operating min, external supply supervisor required · p. 75
Supply, most
3.6 V · VDD, recommended operating max · p. 75
Supply, least
1.65 V · VBAT, recommended operating min · p. 75
Supply, least
3 V · VDDUSB, recommended operating min, USB used · p. 75
Supply, absolute maximum
4 V · VDD, VDDA, VDDUSB and VBAT, absolute max · p. 72
Works from
-40 °C · Ambient min, suffix 6, maximum power dissipation · p. 75
Works up to
85 °C · Ambient max, suffix 6, maximum power dissipation · p. 75
Works up to
105 °C · Ambient max, suffix 6, low power dissipation, subject to TJmax · p. 75
Junction, hottest
105 °C · Junction max, suffix 6 operating range · p. 75
Takes working
72 mA · Supply typical, Run at 180 MHz, external clock, PLL ON, all peripherals enabled · p. 81
Takes at most
110 mA · Supply max, Run at 180 MHz, all peripherals enabled, TA = 105 °C · p. 81
Takes asleep
2.03 µA · Standby typical, VDD = 3.3 V, TA = 25 °C, backup SRAM, RTC and LSE OFF · p. 88
A pin gives at most
25 mA · I/O or control pin sink absolute max · p. 73
Junction to air (LQFP100 - 14 × 14 mm / 0.5 mm pitch)
42 K/W · Junction to ambient thermal resistance · p. 191
Takes at most
125 mA · VDD, max Run current at 180 MHz and TA = 105 °C, all peripherals enabled, ART and prefetch enabled · p. 82
A pin gives at most
20 mA · GPIO source or sink max, relaxed VOL/VOH, except PC13–PC15 · p. 118
A pin gives at most
3 mA · PC13–PC15 source or sink max · p. 118

What it is and has

15
Core
Arm 32-bit Cortex-M4 CPU with FPU · p. 1
Maximum clock
180 MHz · p. 1
Flash memory
512 Kbytes · p. 1
SRAM
128 Kbytes · p. 1
DAC
2× 12-bit · p. 1
CAN
2× CAN 2.0B Active · p. 1
SAI
2 · p. 1
Low power modes
Sleep, Stop and Standby · p. 1
Unique ID
96-bit · p. 1
Debug interfaces
SWD and JTAG · p. 1
Maximum clock frequency
180 MHz · p. 1
Timers
17 · p. 1
ADC
3 · p. 1
Core
Arm® 32-bit Cortex®-M4 CPU with FPU · p. 1
Performance
225 DMIPS/1.25 DMIPS/MHz · p. 1

Around it

1
diode Schottky diode
between analog pin and ground; Recommended for analog pins that may inject negative currents. · p. 115

Specifications

746
ParameterConditionsAs printedPage
External main supply voltage (including VDDA, VDD, VDDUSB and VBAT) VDD–VSSAbsolute maximummin -0.3 · max 4 V72
Input voltage on TTa pins VINAbsolute maximum; minimum VSS–0.3max 4 V72
Input voltage on any other pin VINAbsolute maximum; minimum VSS–0.3max 4 V72
Input voltage on BOOT0 pin VINAbsolute maximum; minimum VSSmax 9 V72
Variations between different VDD power pins |VDDx|Absolute maximummax 50 mV72
Variations between all the different ground pins |VSSX VSS|Absolute maximummax 50 mV72
Total current into sum of all VDD power lines (source) IVDDAbsolute maximummax 240 mA73
Total current out of sum of all VSS ground lines (sink) IVSSAbsolute maximummax -240 mA73
Total current into VDDUSB power line (source) IVDDUSBAbsolute maximummax 25 mA73
Maximum current into each VDD power pin (source) IVDDAbsolute maximummax 100 mA73
Maximum current out of each VSS ground pin (sink) IVSSAbsolute maximummax -100 mA73
Output current sunk by any I/O and control pin IIOAbsolute maximummax 25 mA73
Output current sourced by any I/Os and control pin IIOAbsolute maximummax -25 mA73
Total output current sunk by sum of all I/Os and control pins IIOAbsolute maximummax 120 mA73
Total output current sunk by sum of all USB I/Os IIOAbsolute maximummax 25 mA73
Total output current sourced by sum of all I/Os and control pins IIOAbsolute maximummax -120 mA73
Storage temperature range TSTGAbsolute maximummin -65 · max 150 °C73
Maximum junction temperature TJAbsolute maximummax 125 °C73
Internal AHB clock frequency fHCLKPower Scale 3, PWR_CR VOS[1:0] = 0x01, regulator ON, over-drive OFFmin 0 · max 120 MHz74
Internal AHB clock frequency fHCLKPower Scale 2, PWR_CR VOS[1:0] = 0x10, regulator ON, over-drive OFFmax 144 MHz74
Internal AHB clock frequency fHCLKPower Scale 2, PWR_CR VOS[1:0] = 0x10, regulator ON, over-drive ONmax 168 MHz74
Internal AHB clock frequency fHCLKPower Scale 1, PWR_CR VOS[1:0] = 0x11, regulator ON, over-drive OFFmax 168 MHz74
Internal AHB clock frequency fHCLKPower Scale 1, PWR_CR VOS[1:0] = 0x11, regulator ON, over-drive ONmax 180 MHz74
Internal APB1 clock frequency fPCLK1Over-drive OFFmin 0 · max 42 MHz74
Internal APB1 clock frequency fPCLK1Over-drive ONmin 0 · max 45 MHz74
Internal APB2 clock frequency fPCLK2Over-drive OFFmin 0 · max 84 MHz74
Internal APB2 clock frequency fPCLK2Over-drive ONmin 0 · max 90 MHz74
Standard operating voltage VDDExternal supply supervisor required for 1.7 V minimummin 1.7 · max 3.6 V75
Analog operating voltage (ADC limited to 1.2 M samples) VDDAMust be the same potential as VDD; external supply supervisor required for 1.7 V minimummin 1.7 · max 2.4 V75
Analog operating voltage (ADC limited to 2.4 M samples) VDDAMust be the same potential as VDDmin 2.4 · max 3.6 V75
Backup operating voltage VBAT-min 1.65 · max 3.6 V75
USB supply voltage (supply voltage for PA11,PA12, PB14 and PB15 pins) VDDUSBUSB not usedmin 1.7 · max 3.6 V75
USB supply voltage (supply voltage for PA11,PA12, PB14 and PB15 pins) VDDUSBUSB usedmin 3 · max 3.6 V75
Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12Power Scale 3, VOS[1:0] = 0x01, 120 MHz HCLK max frequencymin 1.08 · typ 1.14 · max 1.2 V75
Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12Power Scale 2, VOS[1:0] = 0x10, 144 MHz HCLK max with over-drive OFF or 168 MHz with over-drive ONmin 1.2 · typ 1.26 · max 1.32 V75
Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12Power Scale 1, VOS[1:0] = 0x11, 168 MHz HCLK max with over-drive OFF or 180 MHz with over-drive ONmin 1.26 · typ 1.32 · max 1.4 V75
Regulator OFF: 1.2 V external voltage must be supplied from external regulator on VCAP_1/VCAP_2 pins V12Max frequency 120 MHzmin 1.1 · typ 1.14 · max 1.2 V75
Regulator OFF: 1.2 V external voltage must be supplied from external regulator on VCAP_1/VCAP_2 pins V12Max frequency 144 MHzmin 1.2 · typ 1.26 · max 1.32 V75
Regulator OFF: 1.2 V external voltage must be supplied from external regulator on VCAP_1/VCAP_2 pins V12Max frequency 168 MHzmin 1.26 · typ 1.32 · max 1.38 V75
Input voltage on RST, FTf and FT pins VIN2 V ≤ VDD ≤ 3.6 Vmin -0.3 · max 5.5 V75
Input voltage on RST, FTf and FT pins VIN1.7 V ≤ VDD ≤ 2 Vmin -0.3 · max 5.2 V75
Input voltage on TTa pins VINMaximum VDDA+0.3min -0.3 V75
Input voltage on BOOT0 pin VIN-min 0 · max 9 V75
Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PDLQFP100max 476 mW75
Ambient temperature for 6 suffix version TAMaximum power dissipationmin -40 · max 85 °C75
Ambient temperature for 6 suffix version TALow power dissipation; TJ must not exceed TJmaxmin -40 · max 105 °C75
Junction temperature range TJ6 suffix versionmin -40 · max 105 °C75
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 180 MHz; TA = 25 °Ctyp 72 · max 83 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 180 MHz; TA = 85 °Cmax 100 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 180 MHz; TA = 105 °Cmax 110 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 168 MHz; TA = 25 °Ctyp 65 · max 71 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 168 MHz; TA = 85 °Cmax 95.3 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 168 MHz; TA = 105 °Cmax 101 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 150 MHz; TA = 25 °Ctyp 59 · max 63.6 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 150 MHz; TA = 85 °Cmax 85.4 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 150 MHz; TA = 105 °Cmax 100.8 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 144 MHz, overdrive OFF; TA = 25 °Ctyp 54 · max 58.4 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 144 MHz, overdrive OFF; TA = 85 °Cmax 78.8 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 144 MHz, overdrive OFF; TA = 105 °Cmax 91.2 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 120 MHz; TA = 25 °Ctyp 40 · max 44.9 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 120 MHz; TA = 85 °Cmax 62.1 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 120 MHz; TA = 105 °Cmax 73.2 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 90 MHz; TA = 25 °Ctyp 30 · max 35.3 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 90 MHz; TA = 85 °Cmax 50.7 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 90 MHz; TA = 105 °Cmax 60 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 60 MHz; TA = 25 °Ctyp 21 · max 25.5 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 60 MHz; TA = 85 °Cmax 39.2 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 60 MHz; TA = 105 °Cmax 46.8 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 30 MHz; TA = 25 °Ctyp 12 · max 16.2 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 30 MHz; TA = 85 °Cmax 28.1 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 30 MHz; TA = 105 °Cmax 36 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 25 MHz; TA = 25 °Ctyp 10 · max 14.41 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 25 MHz; TA = 85 °Cmax 26.17 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; 25 MHz; TA = 105 °Cmax 32.4 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; 16 MHz; TA = 25 °Ctyp 6 · max 11.4 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; 16 MHz; TA = 85 °Cmax 23.1 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; 16 MHz; TA = 105 °Cmax 25.2 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; 8 MHz; TA = 25 °Ctyp 3 · max 9.5 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; 8 MHz; TA = 85 °Cmax 20.3 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; 8 MHz; TA = 105 °Cmax 22.5 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; 4 MHz; TA = 25 °Ctyp 2.3 · max 8.3 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; 4 MHz; TA = 85 °Cmax 18.9 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; 4 MHz; TA = 105 °Cmax 21.1 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; 2 MHz; TA = 25 °Ctyp 1.8 · max 7.7 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; 2 MHz; TA = 85 °Cmax 18.1 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; 2 MHz; TA = 105 °Cmax 20.5 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 180 MHz; TA = 25 °Ctyp 32 · max 42 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 180 MHz; TA = 85 °Cmax 59 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 180 MHz; TA = 105 °Cmax 75 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 168 MHz; TA = 25 °Ctyp 29 · max 35.5 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 168 MHz; TA = 85 °Cmax 51.4 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 168 MHz; TA = 105 °Cmax 55.7 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 150 MHz; TA = 25 °Ctyp 26 · max 31.5 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 150 MHz; TA = 85 °Cmax 47.8 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 150 MHz; TA = 105 °Cmax 51.9 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 144 MHz, overdrive OFF; TA = 25 °Ctyp 24 · max 29.2 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 144 MHz, overdrive OFF; TA = 85 °Cmax 44.7 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 144 MHz, overdrive OFF; TA = 105 °Cmax 48.6 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 120 MHz; TA = 25 °Ctyp 18 · max 23.3 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 120 MHz; TA = 85 °Cmax 36.8 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 120 MHz; TA = 105 °Cmax 40.4 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 90 MHz; TA = 25 °Ctyp 14 · max 19 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 90 MHz; TA = 85 °Cmax 31.8 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 90 MHz; TA = 105 °Cmax 35.1 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 60 MHz; TA = 25 °Ctyp 10 · max 14.7 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 60 MHz; TA = 85 °Cmax 26.9 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 60 MHz; TA = 105 °Cmax 29.9 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 30 MHz; TA = 25 °Ctyp 6 · max 10.7 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 30 MHz; TA = 85 °Cmax 22.1 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 30 MHz; TA = 105 °Cmax 24.9 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 25 MHz; TA = 25 °Ctyp 5 · max 9.96 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 25 MHz; TA = 85 °Cmax 21.24 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; 25 MHz; TA = 105 °Cmax 24.02 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; 16 MHz; TA = 25 °Ctyp 3 · max 8.7 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; 16 MHz; TA = 85 °Cmax 18.9 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; 16 MHz; TA = 105 °Cmax 21.9 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; 8 MHz; TA = 25 °Ctyp 2 · max 8.1 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; 8 MHz; TA = 85 °Cmax 17.8 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; 8 MHz; TA = 105 °Cmax 20.9 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; 4 MHz; TA = 25 °Ctyp 1.7 · max 7.64 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; 4 MHz; TA = 85 °Cmax 17.23 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; 4 MHz; TA = 105 °Cmax 20.32 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; 2 MHz; TA = 25 °Ctyp 1.4 · max 7.4 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; 2 MHz; TA = 85 °Cmax 16.94 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; 2 MHz; TA = 105 °Cmax 20.03 mA81
Supply current in Standby mode IDD_STBYBackup SRAM ON, LSE oscillator in low power mode; TA = 25 °C; VDD = 1.7 Vtyp 2.43 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, LSE oscillator in low power mode; TA = 25 °C; VDD = 2.4 Vtyp 3.44 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, LSE oscillator in low power mode; TA = 25 °C; VDD = 3.3 Vtyp 4.12 · max 7 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, LSE oscillator in low power mode; TA = 85 °C; VDD = 3.3 Vmax 20 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, LSE oscillator in low power mode; TA = 105 °C; VDD = 3.3 Vmax 36 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON, LSE oscillator in low power mode; TA = 25 °C; VDD = 1.7 Vtyp 1.81 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON, LSE oscillator in low power mode; TA = 25 °C; VDD = 2.4 Vtyp 2.81 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON, LSE oscillator in low power mode; TA = 25 °C; VDD = 3.3 Vtyp 3.33 · max 6 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON, LSE oscillator in low power mode; TA = 85 °C; VDD = 3.3 Vmax 17 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON, LSE oscillator in low power mode; TA = 105 °C; VDD = 3.3 Vmax 31 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC ON, LSE oscillator in high drive mode; TA = 25 °C; VDD = 1.7 Vtyp 3.32 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC ON, LSE oscillator in high drive mode; TA = 25 °C; VDD = 2.4 Vtyp 4.33 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC ON, LSE oscillator in high drive mode; TA = 25 °C; VDD = 3.3 Vtyp 4.95 · max 8 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC ON, LSE oscillator in high drive mode; TA = 85 °C; VDD = 3.3 Vmax 21 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC ON, LSE oscillator in high drive mode; TA = 105 °C; VDD = 3.3 Vmax 37 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON, LSE oscillator in high drive mode; TA = 25 °C; VDD = 1.7 Vtyp 2.57 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON, LSE oscillator in high drive mode; TA = 25 °C; VDD = 2.4 Vtyp 3.59 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON, LSE oscillator in high drive mode; TA = 25 °C; VDD = 3.3 Vtyp 4.16 · max 7 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON, LSE oscillator in high drive mode; TA = 85 °C; VDD = 3.3 Vmax 18 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON, LSE oscillator in high drive mode; TA = 105 °C; VDD = 3.3 Vmax 32 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC and LSE OFF; TA = 25 °C; VDD = 1.7 Vtyp 2.03 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC and LSE OFF; TA = 25 °C; VDD = 2.4 Vtyp 2.73 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC and LSE OFF; TA = 25 °C; VDD = 3.3 Vtyp 3.5 · max 6 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC and LSE OFF; TA = 85 °C; VDD = 3.3 Vmax 19 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC and LSE OFF; TA = 105 °C; VDD = 3.3 Vmax 35 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC and LSE OFF; TA = 25 °C; VDD = 1.7 Vtyp 1.28 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC and LSE OFF; TA = 25 °C; VDD = 2.4 Vtyp 1.97 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC and LSE OFF; TA = 25 °C; VDD = 3.3 Vtyp 2.03 · max 5 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC and LSE OFF; TA = 85 °C; VDD = 3.3 Vmax 16 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC and LSE OFF; TA = 105 °C; VDD = 3.3 Vmax 30 uA88
Thermal resistance junction-ambient JALQFP100 - 14 × 14 mm / 0.5 mm pitchtyp 42 °C/W191
InRush current on voltage regulator power-on (POR or wakeup from Standby) IRUSHtyp 160 · max 200 mA79
InRush energy on voltage regulator power-on (POR or wakeup from Standby) ERUSHVDD = 1.7 V, TA = 105 °C, IRUSH = 171 mA for 31 usmax 5.4 uC79
Over_drive switch enable time Tod_swenHSItyp 45 us79
Over_drive switch enable time Tod_swenHSE max for 4 MHz and min for 26 MHzmin 45 · max 100 us79
Over_drive switch enable time Tod_swenExternal HSE 50 MHztyp 40 us79
Over_drive switch disable time Tod_swdisHSItyp 20 us79
Over_drive switch disable time Tod_swdisHSE max for 4 MHz and min for 26 MHzmin 20 · max 80 us79
Over_drive switch disable time Tod_swdisExternal HSE 50 MHztyp 15 us79
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 180 MHz; max at TA = 25 °Ctyp 72 · max 83 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 180 MHz; TA = 85 °Cmax 100 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 180 MHz; TA = 105 °Cmax 110 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 168 MHz; max at TA = 25 °Ctyp 65 · max 71 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 168 MHz; TA = 85 °Cmax 95.3 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 168 MHz; TA = 105 °Cmax 101 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 150 MHz; max at TA = 25 °Ctyp 59 · max 63.6 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 150 MHz; TA = 85 °Cmax 85.4 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 150 MHz; TA = 105 °Cmax 100.8 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 144 MHz, overdrive OFF; max at TA = 25 °Ctyp 54 · max 58.4 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 144 MHz, overdrive OFF; TA = 85 °Cmax 78.8 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 144 MHz, overdrive OFF; TA = 105 °Cmax 91.2 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 120 MHz; max at TA = 25 °Ctyp 40 · max 44.9 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 120 MHz; TA = 85 °Cmax 62.1 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 120 MHz; TA = 105 °Cmax 73.2 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 90 MHz; max at TA = 25 °Ctyp 30 · max 35.3 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 90 MHz; TA = 85 °Cmax 50.7 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 90 MHz; TA = 105 °Cmax 60 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 60 MHz; max at TA = 25 °Ctyp 21 · max 25.5 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 60 MHz; TA = 85 °Cmax 39.2 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 60 MHz; TA = 105 °Cmax 46.8 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 30 MHz; max at TA = 25 °Ctyp 12 · max 16.2 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 30 MHz; TA = 85 °Cmax 28.1 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 30 MHz; TA = 105 °Cmax 36 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 25 MHz; max at TA = 25 °Ctyp 10 · max 14.41 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 25 MHz; TA = 85 °Cmax 26.17 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 25 MHz; TA = 105 °Cmax 32.4 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 16 MHz; max at TA = 25 °Ctyp 6 · max 11.4 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 16 MHz; TA = 85 °Cmax 23.1 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 16 MHz; TA = 105 °Cmax 25.2 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 8 MHz; max at TA = 25 °Ctyp 3 · max 9.5 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 8 MHz; TA = 85 °Cmax 20.3 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 8 MHz; TA = 105 °Cmax 22.5 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 4 MHz; max at TA = 25 °Ctyp 2.3 · max 8.3 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 4 MHz; TA = 85 °Cmax 18.9 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 4 MHz; TA = 105 °Cmax 21.1 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 2 MHz; max at TA = 25 °Ctyp 1.8 · max 7.7 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 2 MHz; TA = 85 °Cmax 18.1 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 2 MHz; TA = 105 °Cmax 20.5 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 180 MHz; max at TA = 25 °Ctyp 32 · max 42 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 180 MHz; TA = 85 °Cmax 59 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 180 MHz; TA = 105 °Cmax 75 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 168 MHz; max at TA = 25 °Ctyp 29 · max 35.5 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 168 MHz; TA = 85 °Cmax 51.4 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 168 MHz; TA = 105 °Cmax 55.7 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 150 MHz; max at TA = 25 °Ctyp 26 · max 31.5 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 150 MHz; TA = 85 °Cmax 47.8 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 150 MHz; TA = 105 °Cmax 51.9 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 144 MHz, overdrive OFF; max at TA = 25 °Ctyp 24 · max 29.2 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 144 MHz, overdrive OFF; TA = 85 °Cmax 44.7 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 144 MHz, overdrive OFF; TA = 105 °Cmax 48.6 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 120 MHz; max at TA = 25 °Ctyp 18 · max 23.3 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 120 MHz; TA = 85 °Cmax 36.8 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 120 MHz; TA = 105 °Cmax 40.4 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 90 MHz; max at TA = 25 °Ctyp 14 · max 19 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 90 MHz; TA = 85 °Cmax 31.8 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 90 MHz; TA = 105 °Cmax 35.1 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 60 MHz; max at TA = 25 °Ctyp 10 · max 14.7 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 60 MHz; TA = 85 °Cmax 26.9 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 60 MHz; TA = 105 °Cmax 29.9 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 30 MHz; max at TA = 25 °Ctyp 6 · max 10.7 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 30 MHz; TA = 85 °Cmax 22.1 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 30 MHz; TA = 105 °Cmax 24.9 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 25 MHz; max at TA = 25 °Ctyp 5 · max 9.96 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 25 MHz; TA = 85 °Cmax 21.24 mA81
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 25 MHz; TA = 105 °Cmax 24.02 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 16 MHz; max at TA = 25 °Ctyp 3 · max 8.7 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 16 MHz; TA = 85 °Cmax 18.9 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 16 MHz; TA = 105 °Cmax 21.9 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 8 MHz; max at TA = 25 °Ctyp 2 · max 8.1 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 8 MHz; TA = 85 °Cmax 17.8 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 8 MHz; TA = 105 °Cmax 20.9 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 4 MHz; max at TA = 25 °Ctyp 1.7 · max 7.64 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 4 MHz; TA = 85 °Cmax 17.23 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 4 MHz; TA = 105 °Cmax 20.32 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 2 MHz; max at TA = 25 °Ctyp 1.4 · max 7.4 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 2 MHz; TA = 85 °Cmax 16.94 mA81
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 2 MHz; TA = 105 °Cmax 20.03 mA81
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 180 MHz; max at TA = 25 °Ctyp 86 · max 93 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 180 MHz; TA = 85 °Cmax 115 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 180 MHz; TA = 105 °Cmax 125 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 168 MHz, overdrive OFF; max at TA = 25 °Ctyp 79 · max 85.1 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 168 MHz, overdrive OFF; TA = 85 °Cmax 111.2 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 168 MHz, overdrive OFF; TA = 105 °Cmax 117.7 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 150 MHz; max at TA = 25 °Ctyp 73 · max 79.6 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 150 MHz; TA = 85 °Cmax 104.8 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 150 MHz; TA = 105 °Cmax 111.2 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 144 MHz, overdrive OFF; max at TA = 25 °Ctyp 68 · max 73.5 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 144 MHz, overdrive OFF; TA = 85 °Cmax 97.3 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 144 MHz, overdrive OFF; TA = 105 °Cmax 103.3 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 120 MHz; max at TA = 25 °Ctyp 54 · max 59.3 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 120 MHz; TA = 85 °Cmax 79.7 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 120 MHz; TA = 105 °Cmax 84.7 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 90 MHz; max at TA = 25 °Ctyp 42 · max 47.23 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 90 MHz; TA = 85 °Cmax 65.5 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 90 MHz; TA = 105 °Cmax 70.1 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 60 MHz; max at TA = 25 °Ctyp 29 · max 33.7 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 60 MHz; TA = 85 °Cmax 49.5 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 60 MHz; TA = 105 °Cmax 53.4 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 30 MHz; max at TA = 25 °Ctyp 16 · max 20.8 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 30 MHz; TA = 85 °Cmax 34 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 30 MHz; TA = 105 °Cmax 37.4 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 25 MHz; max at TA = 25 °Ctyp 13 · max 18.4 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 25 MHz; TA = 85 °Cmax 31.2 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 25 MHz; TA = 105 °Cmax 34.5 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 16 MHz; max at TA = 25 °Ctyp 8 · max 13.8 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 16 MHz; TA = 85 °Cmax 25 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 16 MHz; TA = 105 °Cmax 28.3 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 8 MHz; max at TA = 25 °Ctyp 5 · max 10.8 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 8 MHz; TA = 85 °Cmax 21.1 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 8 MHz; TA = 105 °Cmax 24.2 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 4 MHz; max at TA = 25 °Ctyp 3 · max 9.1 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 4 MHz; TA = 85 °Cmax 18.9 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 4 MHz; TA = 105 °Cmax 22 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 2 MHz; max at TA = 25 °Ctyp 2.1 · max 8.1 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 2 MHz; TA = 85 °Cmax 17.8 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals enabled; fHCLK = 2 MHz; TA = 105 °Cmax 20.9 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 180 MHz; max at TA = 25 °Ctyp 46 · max 55 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 180 MHz; TA = 85 °Cmax 75 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 180 MHz; TA = 105 °Cmax 86 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 168 MHz; max at TA = 25 °Ctyp 43 · max 49.6 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 168 MHz; TA = 85 °Cmax 67.5 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 168 MHz; TA = 105 °Cmax 72.6 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 150 MHz; max at TA = 25 °Ctyp 41 · max 48.2 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 150 MHz; TA = 85 °Cmax 65.8 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 150 MHz; TA = 105 °Cmax 70.8 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 144 MHz, overdrive OFF; max at TA = 25 °Ctyp 38 · max 43.6 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 144 MHz, overdrive OFF; TA = 85 °Cmax 61.9 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 144 MHz, overdrive OFF; TA = 105 °Cmax 66.8 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 120 MHz; max at TA = 25 °Ctyp 32 · max 37.3 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 120 MHz; TA = 85 °Cmax 53.7 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 120 MHz; TA = 105 °Cmax 58 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 90 MHz; max at TA = 25 °Ctyp 26 · max 30.7 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 90 MHz; TA = 85 °Cmax 46 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 90 MHz; TA = 105 °Cmax 50 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 60 MHz; max at TA = 25 °Ctyp 18 · max 22.8 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 60 MHz; TA = 85 °Cmax 36.4 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 60 MHz; TA = 105 °Cmax 40.1 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 30 MHz; max at TA = 25 °Ctyp 10 · max 14.9 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 30 MHz; TA = 85 °Cmax 27.1 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 30 MHz; TA = 105 °Cmax 30.2 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 25 MHz; max at TA = 25 °Ctyp 9 · max 13.55 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 25 MHz; TA = 85 °Cmax 25.4 mA82
Supply current in Run mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 25 MHz; TA = 105 °Cmax 28.54 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 16 MHz; max at TA = 25 °Ctyp 5 · max 11.1 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 16 MHz; TA = 85 °Cmax 21.8 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 16 MHz; TA = 105 °Cmax 25 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 8 MHz; max at TA = 25 °Ctyp 3 · max 9.5 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 8 MHz; TA = 85 °Cmax 19.4 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 8 MHz; TA = 105 °Cmax 22.5 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 4 MHz; max at TA = 25 °Ctyp 2.4 · max 8.34 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 4 MHz; TA = 85 °Cmax 18.1 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 4 MHz; TA = 105 °Cmax 21.17 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 2 MHz; max at TA = 25 °Ctyp 1.8 · max 7.77 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 2 MHz; TA = 85 °Cmax 17.39 mA82
Supply current in Run mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 2 MHz; TA = 105 °Cmax 20.5 mA82
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 180 MHz; max at TA = 25 °Ctyp 81 · max 89 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 180 MHz; TA = 85 °Cmax 110 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 180 MHz; TA = 105 °Cmax 120 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 168 MHz, overdrive OFF; max at TA = 25 °Ctyp 74 · max 80.2 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 168 MHz, overdrive OFF; TA = 85 °Cmax 105.7 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 168 MHz, overdrive OFF; TA = 105 °Cmax 112 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 150 MHz; max at TA = 25 °Ctyp 69 · max 74.9 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 150 MHz; TA = 85 °Cmax 99.5 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 150 MHz; TA = 105 °Cmax 105.6 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 144 MHz, overdrive OFF; max at TA = 25 °Ctyp 63 · max 69.3 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 144 MHz, overdrive OFF; TA = 85 °Cmax 92.4 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 144 MHz, overdrive OFF; TA = 105 °Cmax 98.1 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 120 MHz; max at TA = 25 °Ctyp 51 · max 56.3 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 120 MHz; TA = 85 °Cmax 76.1 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 120 MHz; TA = 105 °Cmax 81.1 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 90 MHz; max at TA = 25 °Ctyp 40 · max 45.32 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 90 MHz; TA = 85 °Cmax 63.19 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 90 MHz; TA = 105 °Cmax 67.63 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 60 MHz; max at TA = 25 °Ctyp 28 · max 33.1 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 60 MHz; TA = 85 °Cmax 48.7 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 60 MHz; TA = 105 °Cmax 52.6 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 30 MHz; max at TA = 25 °Ctyp 16 · max 20.8 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 30 MHz; TA = 85 °Cmax 34 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 30 MHz; TA = 105 °Cmax 37.4 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 25 MHz; max at TA = 25 °Ctyp 13 · max 18.4 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 25 MHz; TA = 85 °Cmax 31.2 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals enabled; fHCLK = 25 MHz; TA = 105 °Cmax 34.5 mA83
Supply current in RUN mode IDDAll peripherals enabled; fHCLK = 16 MHz; max at TA = 25 °Ctyp 8 · max 13.8 mA83
Supply current in RUN mode IDDAll peripherals enabled; fHCLK = 16 MHz; TA = 85 °Cmax 25 mA83
Supply current in RUN mode IDDAll peripherals enabled; fHCLK = 16 MHz; TA = 105 °Cmax 28.2 mA83
Supply current in RUN mode IDDAll peripherals enabled; fHCLK = 8 MHz; max at TA = 25 °Ctyp 5 · max 10.8 mA83
Supply current in RUN mode IDDAll peripherals enabled; fHCLK = 8 MHz; TA = 85 °Cmax 21.1 mA83
Supply current in RUN mode IDDAll peripherals enabled; fHCLK = 8 MHz; TA = 105 °Cmax 24.2 mA83
Supply current in RUN mode IDDAll peripherals enabled; fHCLK = 4 MHz; max at TA = 25 °Ctyp 3 · max 9.1 mA83
Supply current in RUN mode IDDAll peripherals enabled; fHCLK = 4 MHz; TA = 85 °Cmax 19 mA83
Supply current in RUN mode IDDAll peripherals enabled; fHCLK = 4 MHz; TA = 105 °Cmax 22 mA83
Supply current in RUN mode IDDAll peripherals enabled; fHCLK = 2 MHz; max at TA = 25 °Ctyp 2.1 · max 8.1 mA83
Supply current in RUN mode IDDAll peripherals enabled; fHCLK = 2 MHz; TA = 85 °Cmax 17.9 mA83
Supply current in RUN mode IDDAll peripherals enabled; fHCLK = 2 MHz; TA = 105 °Cmax 20.9 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 180 MHz; max at TA = 25 °Ctyp 41 · max 47 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 180 MHz; TA = 85 °Cmax 69 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 180 MHz; TA = 105 °Cmax 79 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 168 MHz; max at TA = 25 °Ctyp 38 · max 43.2 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 168 MHz; TA = 85 °Cmax 61.9 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 168 MHz; TA = 105 °Cmax 67.1 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 150 MHz; max at TA = 25 °Ctyp 37 · max 41.8 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 150 MHz; TA = 85 °Cmax 60.3 mA83
Supply current in RUN mode IDDExternal clock, PLL ON, all peripherals disabled; fHCLK = 150 MHz; TA = 105 °Cmax 65.4 mA83
Supply current in RUN mode IDDAll peripherals disabled; fHCLK = 144 MHz, overdrive OFF; max at TA = 25 °Ctyp 34 · max 39.3 mA83
Supply current in RUN mode IDDAll peripherals disabled; fHCLK = 144 MHz, overdrive OFF; TA = 85 °Cmax 56.9 mA83
Supply current in RUN mode IDDAll peripherals disabled; fHCLK = 144 MHz, overdrive OFF; TA = 105 °Cmax 61.6 mA83
Supply current in RUN mode IDDAll peripherals disabled; fHCLK = 120 MHz; max at TA = 25 °Ctyp 29 · max 34.3 mA83
Supply current in RUN mode IDDAll peripherals disabled; fHCLK = 120 MHz; TA = 85 °Cmax 50.2 mA83
Supply current in RUN mode IDDAll peripherals disabled; fHCLK = 120 MHz; TA = 105 °Cmax 54.4 mA83
Supply current in RUN mode IDDAll peripherals disabled; fHCLK = 90 MHz; max at TA = 25 °Ctyp 24 · max 28.8 mA83
Supply current in RUN mode IDDAll peripherals disabled; fHCLK = 90 MHz; TA = 85 °Cmax 43.6 mA83
Supply current in RUN mode IDDAll peripherals disabled; fHCLK = 90 MHz; TA = 105 °Cmax 47.5 mA83
Supply current in RUN mode IDDAll peripherals disabled; fHCLK = 60 MHz; max at TA = 25 °Ctyp 17 · max 22 mA83
Supply current in RUN mode IDDAll peripherals disabled; fHCLK = 60 MHz; TA = 85 °Cmax 35.6 mA83
Supply current in RUN mode IDDAll peripherals disabled; fHCLK = 60 MHz; TA = 105 °Cmax 39.2 mA83
Supply current in RUN mode IDDAll peripherals disabled; fHCLK = 30 MHz; max at TA = 25 °Ctyp 10 · max 14.8 mA83
Supply current in RUN mode IDDAll peripherals disabled; fHCLK = 30 MHz; TA = 85 °Cmax 27 mA83
Supply current in RUN mode IDDAll peripherals disabled; fHCLK = 30 MHz; TA = 105 °Cmax 30.1 mA83
Supply current in RUN mode IDDAll peripherals disabled; fHCLK = 25 MHz; max at TA = 25 °Ctyp 8 · max 13.51 mA83
Supply current in RUN mode IDDAll peripherals disabled; fHCLK = 25 MHz; TA = 85 °Cmax 25.36 mA83
Supply current in RUN mode IDDAll peripherals disabled; fHCLK = 25 MHz; TA = 105 °Cmax 28.47 mA83
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 16 MHz; max at TA = 25 °Ctyp 5 · max 11.1 mA83
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 16 MHz; TA = 85 °Cmax 21.8 mA83
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 16 MHz; TA = 105 °Cmax 24.9 mA83
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 8 MHz; max at TA = 25 °Ctyp 3 · max 9.5 mA83
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 8 MHz; TA = 85 °Cmax 19.4 mA83
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 8 MHz; TA = 105 °Cmax 22.5 mA83
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 4 MHz; max at TA = 25 °Ctyp 2.3 · max 8.35 mA83
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 4 MHz; TA = 85 °Cmax 18.12 mA83
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 4 MHz; TA = 105 °Cmax 21.17 mA83
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 2 MHz; max at TA = 25 °Ctyp 1.8 · max 7.78 mA83
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 2 MHz; TA = 85 °Cmax 17.42 mA83
Supply current in RUN mode IDDHSI, PLL OFF, all peripherals disabled; fHCLK = 2 MHz; TA = 105 °Cmax 20.51 mA83
Supply current in Stop mode with voltage regulator in main regulator mode IDD_STOP_NMFlash memory in Stop mode, all oscillators OFF, no independent watchdog; typ at TA = 25 °C; max at TA = 25 °C, VDD = 3.6 Vtyp 0.234 · max 1.2 mA87
Supply current in Stop mode with voltage regulator in main regulator mode IDD_STOP_NMFlash memory in Stop mode, all oscillators OFF, no independent watchdog; TA = 85 °C, VDD = 3.6 Vmax 10 mA87
Supply current in Stop mode with voltage regulator in main regulator mode IDD_STOP_NMFlash memory in Stop mode, all oscillators OFF, no independent watchdog; TA = 105 °C, VDD = 3.6 Vmax 16 mA87
Supply current in Stop mode with voltage regulator in main regulator mode IDD_STOP_NMFlash memory in Deep power down mode, all oscillators OFF, no independent watchdog; typ at TA = 25 °C; max at TA = 25 °C, VDD = 3.6 Vtyp 0.205 · max 1 mA87
Supply current in Stop mode with voltage regulator in main regulator mode IDD_STOP_NMFlash memory in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 85 °C, VDD = 3.6 Vmax 9.5 mA87
Supply current in Stop mode with voltage regulator in main regulator mode IDD_STOP_NMFlash memory in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 105 °C, VDD = 3.6 Vmax 15 mA87
Supply current in Stop mode with voltage regulator in Low power regulator mode IDD_STOP_NMFlash memory in Stop mode, all oscillators OFF, no independent watchdog; typ at TA = 25 °C; max at TA = 25 °C, VDD = 3.6 Vtyp 0.15 · max 0.95 mA87
Supply current in Stop mode with voltage regulator in Low power regulator mode IDD_STOP_NMFlash memory in Stop mode, all oscillators OFF, no independent watchdog; TA = 85 °C, VDD = 3.6 Vmax 8.5 mA87
Supply current in Stop mode with voltage regulator in Low power regulator mode IDD_STOP_NMFlash memory in Stop mode, all oscillators OFF, no independent watchdog; TA = 105 °C, VDD = 3.6 Vmax 14 mA87
Supply current in Stop mode with voltage regulator in Low power regulator mode IDD_STOP_NMFlash memory in Deep power down mode, all oscillators OFF, no independent watchdog; typ at TA = 25 °C; max at TA = 25 °C, VDD = 3.6 Vtyp 0.121 · max 0.9 mA87
Supply current in Stop mode with voltage regulator in Low power regulator mode IDD_STOP_NMFlash memory in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 85 °C, VDD = 3.6 Vmax 6 mA87
Supply current in Stop mode with voltage regulator in Low power regulator mode IDD_STOP_NMFlash memory in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 105 °C, VDD = 3.6 Vmax 12 mA87
Supply current in Stop mode with voltage regulator in main regulator and under-drive mode IDD_STOP_UDMFlash memory in Deep power down mode, main regulator in under-drive mode, all oscillators OFF, no independent watchdog; typ at TA = 25 °C; max at TA = 25 °C, VDD = 3.6 Vtyp 0.119 · max 0.4 mA87
Supply current in Stop mode with voltage regulator in main regulator and under-drive mode IDD_STOP_UDMFlash memory in Deep power down mode, main regulator in under-drive mode, all oscillators OFF, no independent watchdog; TA = 85 °C, VDD = 3.6 Vmax 3 mA87
Supply current in Stop mode with voltage regulator in main regulator and under-drive mode IDD_STOP_UDMFlash memory in Deep power down mode, main regulator in under-drive mode, all oscillators OFF, no independent watchdog; TA = 105 °C, VDD = 3.6 Vmax 5 mA87
Supply current in Standby mode IDD_STBYBackup SRAM ON, and LSE oscillator in low power mode; TA = 25 °C, VDD = 1.7 Vtyp 2.43 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, and LSE oscillator in low power mode; TA = 25 °C, VDD = 2.4 Vtyp 3.44 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, and LSE oscillator in low power mode; TA = 25 °C, VDD = 3.3 Vtyp 4.12 · max 7 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, and LSE oscillator in low power mode; TA = 85 °C, VDD = 3.3 Vmax 20 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, and LSE oscillator in low power mode; TA = 105 °C, VDD = 3.3 Vmax 36 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 25 °C, VDD = 1.7 Vtyp 1.81 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 25 °C, VDD = 2.4 Vtyp 2.81 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 25 °C, VDD = 3.3 Vtyp 3.33 · max 6 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 85 °C, VDD = 3.3 Vmax 17 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 105 °C, VDD = 3.3 Vmax 31 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VDD = 1.7 Vtyp 3.32 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VDD = 2.4 Vtyp 4.33 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VDD = 3.3 Vtyp 4.95 · max 8 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC ON and LSE oscillator in high drive mode; TA = 85 °C, VDD = 3.3 Vmax 21 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC ON and LSE oscillator in high drive mode; TA = 105 °C, VDD = 3.3 Vmax 37 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VDD = 1.7 Vtyp 2.57 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VDD = 2.4 Vtyp 3.59 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VDD = 3.3 Vtyp 4.16 · max 7 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON and LSE oscillator in high drive mode; TA = 85 °C, VDD = 3.3 Vmax 18 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC ON and LSE oscillator in high drive mode; TA = 105 °C, VDD = 3.3 Vmax 32 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC and LSE OFF; TA = 25 °C, VDD = 1.7 Vtyp 2.03 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC and LSE OFF; TA = 25 °C, VDD = 2.4 Vtyp 2.73 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC and LSE OFF; TA = 25 °C, VDD = 3.3 Vtyp 3.5 · max 6 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC and LSE OFF; TA = 85 °C, VDD = 3.3 Vmax 19 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC and LSE OFF; TA = 105 °C, VDD = 3.3 Vmax 35 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC and LSE OFF; TA = 25 °C, VDD = 1.7 Vtyp 1.28 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC and LSE OFF; TA = 25 °C, VDD = 2.4 Vtyp 1.97 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC and LSE OFF; TA = 25 °C, VDD = 3.3 Vtyp 2.03 · max 5 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC and LSE OFF; TA = 85 °C, VDD = 3.3 Vmax 16 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC and LSE OFF; TA = 105 °C, VDD = 3.3 Vmax 30 uA88
Backup domain supply current IDD_VBATBackup SRAM ON, RTC ON and LSE oscillator in low power mode; TA = 25 °C, VBAT = 1.7 Vtyp 1.46 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC ON and LSE oscillator in low power mode; TA = 25 °C, VBAT = 2.4 Vtyp 1.62 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC ON and LSE oscillator in low power mode; TA = 25 °C, VBAT = 3.3 Vtyp 1.83 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC ON and LSE oscillator in low power mode; TA = 85 °C, VBAT = 3.6 Vmax 6 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC ON and LSE oscillator in low power mode; TA = 105 °C, VBAT = 3.6 Vmax 11 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 25 °C, VBAT = 1.7 Vtyp 0.72 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 25 °C, VBAT = 2.4 Vtyp 0.85 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 25 °C, VBAT = 3.3 Vtyp 1 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 85 °C, VBAT = 3.6 Vmax 3 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 105 °C, VBAT = 3.6 Vmax 5 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VBAT = 1.7 Vtyp 2.24 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VBAT = 2.4 Vtyp 2.4 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VBAT = 3.3 Vtyp 2.64 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VBAT = 1.7 Vtyp 1.5 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VBAT = 2.4 Vtyp 1.64 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VBAT = 3.3 Vtyp 1.86 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC and LSE OFF; TA = 25 °C, VBAT = 1.7 Vtyp 0.74 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC and LSE OFF; TA = 25 °C, VBAT = 2.4 Vtyp 0.75 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC and LSE OFF; TA = 25 °C, VBAT = 3.3 Vtyp 0.78 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC and LSE OFF; TA = 85 °C, VBAT = 3.6 Vmax 5 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC and LSE OFF; TA = 105 °C, VBAT = 3.6 Vmax 10 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC and LSE OFF; TA = 25 °C, VBAT = 1.7 Vtyp 0.05 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC and LSE OFF; TA = 25 °C, VBAT = 2.4 Vtyp 0.05 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC and LSE OFF; TA = 25 °C, VBAT = 3.3 Vtyp 0.05 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC and LSE OFF; TA = 85 °C, VBAT = 3.6 Vmax 2 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC and LSE OFF; TA = 105 °C, VBAT = 3.6 Vmax 4 uA89
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 168 MHz; max at TA = 25 °Ctyp 65.11 · max 70 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 168 MHz; TA = 85 °Cmax 79.7 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 168 MHz; TA = 105 °Cmax 90 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 150 MHz; max at TA = 25 °Ctyp 58.31 · max 62.8 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 150 MHz; TA = 85 °Cmax 73.4 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 150 MHz; TA = 105 °Cmax 79.9 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 144 MHz; max at TA = 25 °Ctyp 53.14 · max 57.1 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 144 MHz; TA = 85 °Cmax 69.9 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 144 MHz; TA = 105 °Cmax 75.3 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 120 MHz; max at TA = 25 °Ctyp 39.58 · max 47.2 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 120 MHz; TA = 85 °Cmax 60.7 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 120 MHz; TA = 105 °Cmax 71.4 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 90 MHz; max at TA = 25 °Ctyp 29.99 · max 34.7 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 90 MHz; TA = 85 °Cmax 45.23 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 90 MHz; TA = 105 °Cmax 49.34 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 60 MHz; max at TA = 25 °Ctyp 20.37 · max 25.2 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 60 MHz; TA = 85 °Cmax 35.2 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 60 MHz; TA = 105 °Cmax 38.2 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 30 MHz; max at TA = 25 °Ctyp 11.37 · max 12.9 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 30 MHz; TA = 85 °Cmax 28.4 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 30 MHz; TA = 105 °Cmax 33.2 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 25 MHz; max at TA = 25 °Ctyp 9.65 · max 10.9 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 25 MHz; TA = 85 °Cmax 17.8 mA91
Supply current in Run mode from VDD supply IDDAll peripherals enabled; fHCLK = 25 MHz; TA = 105 °Cmax 24.3 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 168 MHz; max at TA = 25 °Ctyp 29.74 · max 32.43 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 168 MHz; TA = 85 °Cmax 42.4 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 168 MHz; TA = 105 °Cmax 48.5 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 150 MHz; max at TA = 25 °Ctyp 25.81 · max 29.12 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 150 MHz; TA = 85 °Cmax 39.4 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 150 MHz; TA = 105 °Cmax 43.8 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 144 MHz; max at TA = 25 °Ctyp 24.57 · max 26.61 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 144 MHz; TA = 85 °Cmax 36 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 144 MHz; TA = 105 °Cmax 41.9 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 120 MHz; max at TA = 25 °Ctyp 17.69 · max 22.09 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 120 MHz; TA = 85 °Cmax 32.9 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 120 MHz; TA = 105 °Cmax 40.8 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 90 MHz; max at TA = 25 °Ctyp 13.58 · max 15.92 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 90 MHz; TA = 85 °Cmax 30 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 90 MHz; TA = 105 °Cmax 36.5 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 60 MHz; max at TA = 25 °Ctyp 9.41 · max 11.05 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 60 MHz; TA = 85 °Cmax 24.4 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 60 MHz; TA = 105 °Cmax 30.2 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 30 MHz; max at TA = 25 °Ctyp 5.44 · max 6.64 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 30 MHz; TA = 85 °Cmax 15 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 30 MHz; TA = 105 °Cmax 22 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 25 MHz; max at TA = 25 °Ctyp 4.73 · max 5.72 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 25 MHz; TA = 85 °Cmax 12.57 mA91
Supply current in Run mode from VDD supply IDDAll peripherals disabled; fHCLK = 25 MHz; TA = 105 °Cmax 19.06 mA91
Supply current in Run mode from V12 and VDD supply IDD12All peripherals enabled; fHCLK = 168 MHz, VDD = 3.3 Vtyp 61.72 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals enabled; fHCLK = 168 MHz, VDD = 1.7 Vtyp 60.15 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals enabled; fHCLK = 150 MHz, VDD = 3.3 Vtyp 51.69 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals enabled; fHCLK = 150 MHz, VDD = 1.7 Vtyp 55.46 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals enabled; fHCLK = 144 MHz, VDD = 3.3 Vtyp 51.45 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals enabled; fHCLK = 144 MHz, VDD = 1.7 Vtyp 50.94 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals enabled; fHCLK = 120 MHz, VDD = 3.3 Vtyp 38.94 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals enabled; fHCLK = 120 MHz, VDD = 1.7 Vtyp 40.66 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals enabled; fHCLK = 90 MHz, VDD = 3.3 Vtyp 29.48 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals enabled; fHCLK = 90 MHz, VDD = 1.7 Vtyp 28.18 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals enabled; fHCLK = 60 MHz, VDD = 3.3 Vtyp 19.23 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals enabled; fHCLK = 60 MHz, VDD = 1.7 Vtyp 20.05 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals enabled; fHCLK = 30 MHz, VDD = 3.3 Vtyp 10.41 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals enabled; fHCLK = 30 MHz, VDD = 1.7 Vtyp 11.26 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals enabled; fHCLK = 25 MHz, VDD = 3.3 Vtyp 8.83 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals enabled; fHCLK = 25 MHz, VDD = 1.7 Vtyp 9.56 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals disabled; fHCLK = 168 MHz, VDD = 3.3 Vtyp 31.44 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals disabled; fHCLK = 168 MHz, VDD = 1.7 Vtyp 30.06 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals disabled; fHCLK = 150 MHz, VDD = 3.3 Vtyp 28.67 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals disabled; fHCLK = 150 MHz, VDD = 1.7 Vtyp 27.38 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals disabled; fHCLK = 144 MHz, VDD = 3.3 Vtyp 25.51 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals disabled; fHCLK = 144 MHz, VDD = 1.7 Vtyp 23.37 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals disabled; fHCLK = 120 MHz, VDD = 3.3 Vtyp 19.06 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals disabled; fHCLK = 120 MHz, VDD = 1.7 Vtyp 21.73 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals disabled; fHCLK = 90 MHz, VDD = 3.3 Vtyp 14.83 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals disabled; fHCLK = 90 MHz, VDD = 1.7 Vtyp 14.74 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals disabled; fHCLK = 60 MHz, VDD = 3.3 Vtyp 10.16 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals disabled; fHCLK = 60 MHz, VDD = 1.7 Vtyp 10.3 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals disabled; fHCLK = 30 MHz, VDD = 3.3 Vtyp 5.41 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals disabled; fHCLK = 30 MHz, VDD = 1.7 Vtyp 5.64 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals disabled; fHCLK = 25 MHz, VDD = 3.3 Vtyp 4.599 mA92
Supply current in Run mode from V12 and VDD supply IDD12All peripherals disabled; fHCLK = 25 MHz, VDD = 1.7 Vtyp 4.8 mA92
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 168 MHz; max at TA = 25 °Ctyp 43.7 · max 47.5 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 168 MHz; TA = 85 °Cmax 66.5 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 168 MHz; TA = 105 °Cmax 79.3 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 150 MHz; max at TA = 25 °Ctyp 39.2 · max 42.7 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 150 MHz; TA = 85 °Cmax 60.7 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 150 MHz; TA = 105 °Cmax 73.3 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 144 MHz; max at TA = 25 °Ctyp 35.7 · max 38.8 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 144 MHz; TA = 85 °Cmax 55.3 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 144 MHz; TA = 105 °Cmax 66.9 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 120 MHz; max at TA = 25 °Ctyp 26.5 · max 28.6 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 120 MHz; TA = 85 °Cmax 41.8 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 120 MHz; TA = 105 °Cmax 51.6 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 90 MHz; max at TA = 25 °Ctyp 20 · max 21.91 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 90 MHz; TA = 85 °Cmax 33.85 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 90 MHz; TA = 105 °Cmax 43.2 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 60 MHz; max at TA = 25 °Ctyp 13.6 · max 15.2 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 60 MHz; TA = 85 °Cmax 25.8 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 60 MHz; TA = 105 °Cmax 34.9 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 30 MHz; max at TA = 25 °Ctyp 7.4 · max 8.5 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 30 MHz; TA = 85 °Cmax 18.4 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 30 MHz; TA = 105 °Cmax 27 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 25 MHz; max at TA = 25 °Ctyp 6.3 · max 7.5 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 25 MHz; TA = 85 °Cmax 16.9 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals enabled, Flash memory on; fHCLK = 25 MHz; TA = 105 °Cmax 25.5 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 168 MHz; max at TA = 25 °Ctyp 7.3 · max 8.6 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 168 MHz; TA = 85 °Cmax 21.2 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 168 MHz; TA = 105 °Cmax 31.9 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 150 MHz; max at TA = 25 °Ctyp 6.6 · max 7.94 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 150 MHz; TA = 85 °Cmax 20.4 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 150 MHz; TA = 105 °Cmax 31 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 144 MHz; max at TA = 25 °Ctyp 6 · max 7.3 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 144 MHz; TA = 85 °Cmax 18.6 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 144 MHz; TA = 105 °Cmax 28.5 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 120 MHz; max at TA = 25 °Ctyp 4.6 · max 5.5 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 120 MHz; TA = 85 °Cmax 14.9 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 120 MHz; TA = 105 °Cmax 23.4 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 90 MHz; max at TA = 25 °Ctyp 3.6 · max 4.6 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 90 MHz; TA = 85 °Cmax 13.6 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 90 MHz; TA = 105 °Cmax 22.1 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 60 MHz; max at TA = 25 °Ctyp 2.6 · max 3.4 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 60 MHz; TA = 85 °Cmax 12.5 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 60 MHz; TA = 105 °Cmax 20.8 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 30 MHz; max at TA = 25 °Ctyp 1.8 · max 2.7 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 30 MHz; TA = 85 °Cmax 11.3 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 30 MHz; TA = 105 °Cmax 19.7 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 25 MHz; max at TA = 25 °Ctyp 1.6 · max 2.49 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 25 MHz; TA = 85 °Cmax 11.09 mA93
Supply current in Sleep mode from VDD supply IDDAll peripherals disabled, Flash memory on; fHCLK = 25 MHz; TA = 105 °Cmax 19.42 mA93
I/O switching current IDDIOVDD = 3.3 V, C = CINT; fsw = 2 MHztyp 0 mA95
I/O switching current IDDIOVDD = 3.3 V, C = CINT; fsw = 8 MHztyp 0.2 mA95
I/O switching current IDDIOVDD = 3.3 V, C = CINT; fsw = 25 MHztyp 0.6 mA95
I/O switching current IDDIOVDD = 3.3 V, C = CINT; fsw = 50 MHztyp 1.1 mA95
I/O switching current IDDIOVDD = 3.3 V, C = CINT; fsw = 60 MHztyp 1.3 mA95
I/O switching current IDDIOVDD = 3.3 V, C = CINT; fsw = 84 MHztyp 1.8 mA95
I/O switching current IDDIOVDD = 3.3 V, C = CINT; fsw = 90 MHztyp 1.9 mA95
I/O switching current IDDIOVDD = 3.3 V, CEXT = 0 pF, C = CINT + CEXT + CS; fsw = 2 MHztyp 0.1 mA95
I/O switching current IDDIOVDD = 3.3 V, CEXT = 0 pF, C = CINT + CEXT + CS; fsw = 8 MHztyp 0.4 mA95
I/O switching current IDDIOVDD = 3.3 V, CEXT = 0 pF, C = CINT + CEXT + CS; fsw = 25 MHztyp 1.23 mA95
I/O switching current IDDIOVDD = 3.3 V, CEXT = 0 pF, C = CINT + CEXT + CS; fsw = 50 MHztyp 2.43 mA95
I/O switching current IDDIOVDD = 3.3 V, CEXT = 0 pF, C = CINT + CEXT + CS; fsw = 60 MHztyp 2.93 mA95
I/O switching current IDDIOVDD = 3.3 V, CEXT = 0 pF, C = CINT + CEXT + CS; fsw = 84 MHztyp 3.86 mA95
I/O switching current IDDIOVDD = 3.3 V, CEXT = 0 pF, C = CINT + CEXT + CS; fsw = 90 MHztyp 4.07 mA95
I/O switching current IDDIOVDD = 3.3 V, CEXT = 10 pF, C = CINT + CEXT + CS; fsw = 2 MHztyp 0.18 mA96
I/O switching current IDDIOVDD = 3.3 V, CEXT = 10 pF, C = CINT + CEXT + CS; fsw = 8 MHztyp 0.67 mA96
I/O switching current IDDIOVDD = 3.3 V, CEXT = 10 pF, C = CINT + CEXT + CS; fsw = 25 MHztyp 2.09 mA96
I/O switching current IDDIOVDD = 3.3 V, CEXT = 10 pF, C = CINT + CEXT + CS; fsw = 50 MHztyp 3.6 mA96
I/O switching current IDDIOVDD = 3.3 V, CEXT = 10 pF, C = CINT + CEXT + CS; fsw = 60 MHztyp 4.5 mA96
I/O switching current IDDIOVDD = 3.3 V, CEXT = 10 pF, C = CINT + CEXT + CS; fsw = 84 MHztyp 7.8 mA96
I/O switching current IDDIOVDD = 3.3 V, CEXT = 10 pF, C = CINT + CEXT + CS; fsw = 90 MHztyp 9.8 mA96
I/O switching current IDDIOVDD = 3.3 V, CEXT = 22 pF, C = CINT + CEXT + CS; fsw = 2 MHztyp 0.26 mA96
I/O switching current IDDIOVDD = 3.3 V, CEXT = 22 pF, C = CINT + CEXT + CS; fsw = 8 MHztyp 1.01 mA96
I/O switching current IDDIOVDD = 3.3 V, CEXT = 22 pF, C = CINT + CEXT + CS; fsw = 25 MHztyp 3.14 mA96
I/O switching current IDDIOVDD = 3.3 V, CEXT = 22 pF, C = CINT + CEXT + CS; fsw = 50 MHztyp 6.39 mA96
I/O switching current IDDIOVDD = 3.3 V, CEXT = 22 pF, C = CINT + CEXT + CS; fsw = 60 MHztyp 10.68 mA96
I/O switching current IDDIOVDD = 3.3 V, CEXT = 33 pF, C = CINT + Cext + CS; fsw = 2 MHztyp 0.33 mA96
I/O switching current IDDIOVDD = 3.3 V, CEXT = 33 pF, C = CINT + Cext + CS; fsw = 8 MHztyp 1.29 mA96
I/O switching current IDDIOVDD = 3.3 V, CEXT = 33 pF, C = CINT + Cext + CS; fsw = 25 MHztyp 4.23 mA96
I/O switching current IDDIOVDD = 3.3 V, CEXT = 33 pF, C = CINT + Cext + CS; fsw = 50 MHztyp 11.02 mA96
Oscillator frequency fOSC_INmin 4 · max 26 MHz103
Feedback resistor RFtyp 200 k103
HSE current consumption IDDVDD = 3.3 V, ESR = 30 Ω, CL = 5 pF @ 25 MHztyp 450 uA103
HSE current consumption IDDVDD = 3.3 V, ESR = 30 Ω, CL = 10 pF @ 25 MHztyp 530 uA103
HSE accuracy ACCHSEmin -500 · max 500 ppm103
Maximum critical crystal gm Gm_crit_maxStartupmax 1 mA/V103
Startup time tSU(HSE)VDD is stabilizedtyp 2 ms103
Feedback resistor RFtyp 18.4 M104
LSE current consumption IDDmax 1 uA104
LSE accuracy ACCLSEmin -500 · max 500 ppm104
Maximum critical crystal gm Gm_crit_maxStartup low-power modemax 0.56 uA/V104
Maximum critical crystal gm Gm_crit_maxStartup high-drive modemax 1.5 uA/V104
startup time tSU(LSE)VDD is stabilizedtyp 2 s104
PLL lock time tLOCKVCO frequency = 100 MHzmin 75 · max 200 us107
PLL lock time tLOCKVCO frequency = 432 MHzmin 100 · max 300 us107
Cycle-to-cycle jitter JitterSystem clock 120 MHz; RMStyp 25 ps107
Cycle-to-cycle jitter JitterSystem clock 120 MHz; peak to peak; typical ±150 pstyp 150 ps107
Period Jitter JitterSystem clock 120 MHz; RMStyp 15 ps107
Period Jitter JitterSystem clock 120 MHz; peak to peak; typical ±200 pstyp 200 ps107
Bit Time CAN jitter JitterCycle to cycle at 1 MHz on 1000 samplestyp 330 ps107
PLL power consumption on VDD IDD(PLL)VCO frequency = 100 MHzmin 0.15 · max 0.4 mA107
PLL power consumption on VDD IDD(PLL)VCO frequency = 432 MHzmin 0.45 · max 0.75 mA107
PLL power consumption on VDDA IDDA(PLL)VCO frequency = 100 MHzmin 0.3 · max 0.4 mA107
PLL power consumption on VDDA IDDA(PLL)VCO frequency = 432 MHzmin 0.55 · max 0.85 mA107
PLLI2S input clock fPLLI2S_INmin 0.95 · typ 1 · max 2.1 MHz107
PLLI2S multiplier output clock fPLLI2S_OUTmax 216 MHz107
PLLI2S VCO output fVCO_OUTmin 100 · max 432 MHz107
PLLI2S lock time tLOCKVCO frequency = 100 MHzmin 75 · max 200 us107
PLLI2S lock time tLOCKVCO frequency = 432 MHzmin 100 · max 300 us107
Master I2S clock jitter JitterCycle to cycle at 12.288 MHz on 48 KHz period, N = 432, R = 5; RMStyp 90 -107
Master I2S clock jitter JitterCycle to cycle at 12.288 MHz on 48 KHz period, N = 432, R = 5; peak to peak; typical ±280 pstyp 280 ps107
Master I2S clock jitter JitterAverage frequency of 12.288 MHz, N = 432, R = 5 on 1000 samplestyp 90 ps107
WS I2S clock jitter JitterCycle to cycle at 48 KHz on 1000 samplestyp 400 ps107
PLLI2S power consumption on VDD IDD(PLLI2S)VCO frequency = 100 MHzmin 0.15 · max 0.4 mA108
PLLI2S power consumption on VDD IDD(PLLI2S)VCO frequency = 432 MHzmin 0.45 · max 0.75 mA108
PLLI2S power consumption on VDDA IDDA(PLLI2S)VCO frequency = 100 MHzmin 0.3 · max 0.4 mA108
PLLI2S power consumption on VDDA IDDA(PLLI2S)VCO frequency = 432 MHzmin 0.55 · max 0.85 mA108
PLLSAI input clock fPLLSAI_INmin 0.95 · typ 1 · max 2.1 MHz108
PLLSAI multiplier output clock fPLLSAI_OUTmax 216 MHz108
PLLSAI VCO output fVCO_OUTmin 100 · max 432 MHz108
PLLSAI lock time tLOCKVCO frequency = 100 MHzmin 75 · max 200 us108
PLLSAI lock time tLOCKVCO frequency = 432 MHzmin 100 · max 300 us108
Main SAI clock jitter JitterCycle to cycle at 12.288 MHz on 48 KHz period, N = 432, R = 5; RMStyp 90 -108
Main SAI clock jitter JitterCycle to cycle at 12.288 MHz on 48 KHz period, N = 432, R = 5; peak to peak; typical ±280 pstyp 280 ps108
Main SAI clock jitter JitterAverage frequency of 12.288 MHz, N = 432, R = 5 on 1000 samplestyp 90 ps108
FS clock jitter JitterCycle to cycle at 48 KHz on 1000 samplestyp 400 ps108
PLLSAI power consumption on VDD IDD(PLLSAI)VCO frequency = 100 MHzmin 0.15 · max 0.4 mA108
PLLSAI power consumption on VDD IDD(PLLSAI)VCO frequency = 432 MHzmin 0.45 · max 0.75 mA108
PLLSAI power consumption on VDDA IDDA(PLLSAI)VCO frequency = 100 MHzmin 0.3 · max 0.4 mA108
PLLSAI power consumption on VDDA IDDA(PLLSAI)VCO frequency = 432 MHzmin 0.55 · max 0.85 mA108
Electrostatic discharge voltage (human body model) VESD(HBM)TA = +25 °C conforming to ANSI/JEDEC JS-001; Class 2max 2000 V114
Electrostatic discharge voltage (charge device model) VESD(CDM)TA = +25 °C conforming to ANSI/ESD STM5.3.1; LQFP100; Class C4max 500 V114
Injected current on BOOT0 pin IINJFunctional susceptibility: negative injection –0 mA; positive injection NAmin 0 mA115
Injected current on NRST pin IINJFunctional susceptibility: negative injection –0 mA; positive injection NAmin 0 mA115
Injected current on PE2, PE3,PE4, PE5, PE6, PC13, PC14, PF10, PH0, PH1, NRST, PC0, PC1, PC2, PC3, PG15, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PE0, PE1 IINJFunctional susceptibility: negative injection –0 mA; positive injection NAmin 0 mA115
Injected current on any other FT and FTf pins IINJFunctional susceptibility: negative injection -5 mA; positive injection NAmin -5 mA115
Injected current on any other pins IINJFunctional susceptibility: negative and positive injectionmin -5 · max 5 mA115
Output low level voltage for an I/O pin VOLCMOS port; IIO = +8 mA; 2.7 V ≤ VDD ≤ 3.6 Vmax 0.4 V119
Output low level voltage for an I/O pin VOLTTL port; IIO = +8 mA; 2.7 V ≤ VDD ≤ 3.6 Vmax 0.4 V119
Output high level voltage for an I/O pin VOHTTL port; IIO = +8 mA; 2.7 V ≤ VDD ≤ 3.6 Vmin 2.4 V119
Output low level voltage for an I/O pin VOLIIO = +20 mA; 2.7 V ≤ VDD ≤ 3.6 Vmax 1.3 V119
Output low level voltage for an I/O pin VOLIIO = +6 mA; 1.8 V ≤ VDD ≤ 3.6 Vmax 0.4 V119
Output low level voltage for an I/O pin VOLIIO = +4 mA; 1.7 V ≤ VDD ≤ 3.6 Vmax 0.4 V119
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = 00; CL = 50 pF, VDD ≥ 2.7 Vmax 4 MHz119
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = 00; CL = 50 pF, VDD ≥ 1.7 Vmax 2 MHz119
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = 00; CL = 10 pF, VDD ≥ 2.7 Vmax 8 MHz119
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = 00; CL = 10 pF, VDD ≥ 1.8 Vmax 4 MHz119
Maximum frequency fmax(IO)outOSPEEDRy[1:0] = 00; CL = 10 pF, VDD ≥ 1.7 Vmax 3 MHz119
Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)outOSPEEDRy[1:0] = 00; CL = 50 pF, VDD = 1.7 V to 3.6 Vmax 100 ns119
Weak pull-up equivalent resistor RPUVIN = VSSmin 30 · typ 40 · max 50 k121
NRST Input filtered pulse VF(NRST)max 100 ns121
NRST Input not filtered pulse VNF(NRST)VDD > 2.7 Vmin 300 ns121
Generated reset pulse duration TNRST_OUTInternal Reset sourcemin 20 us121
USB OTG full speed transceiver operating voltage VDDUSBmin 3 · max 3.6 V136
Differential input sensitivity VDII(USB_FS_DP/DM, USB_HS_DP/DM)min 0.2 V136
Differential common mode range VCMIncludes VDI rangemin 0.8 · max 2.5 V136
Single ended receiver threshold VSEmin 1.3 · max 2 V136
Static output level low VOLRL of 1.5 kΩ to 3.6 Vmax 0.3 V136
Static output level high VOHRL of 15 kΩ to VSSmin 2.8 · max 3.6 V136
PA11, PA12, PB14, PB15 (USB_FS_DP/DM, USB_HS_DP/DM) RPDVIN = VDDUSBmin 17 · typ 21 · max 24 k136
PA9, PB13 (OTG_FS_VBUS, OTG_HS_VBUS) RPDVIN = VDDUSBmin 0.65 · typ 1.1 · max 2 k136
PA12, PB15 (USB_FS_DP, USB_HS_DP) RPUVIN = VSSmin 1.5 · typ 1.8 · max 2.1 k136
PA9, PB13 (OTG_FS_VBUS, OTG_HS_VBUS) RPUVIN = VSSmin 0.25 · typ 0.37 · max 0.55 k136
Rise time trCL = 50 pFmin 4 · max 20 ns137
Fall time tfCL = 50 pFmin 4 · max 20 ns137
Rise/ fall time matching trfmtr/tfmin 90 · max 110 %137
Output signal crossover voltage VCRSmin 1.3 · max 2 V137
Output driver impedance ZDRVDriving high or lowmin 28 · max 44 137
USB OTG HS operating voltage VDDInput levelmin 1.7 · max 3.6 V137
fHCLK value to guarantee proper operation of USB HS interfacemin 30 MHz137
Frequency (first transition) FSTART_8BIT8-bit ±10%min 54 · typ 60 · max 66 MHz137
Frequency (steady state) ±500 ppm FSTEADYmin 59.97 · typ 60 · max 60.03 MHz137
Duty cycle (first transition) DSTART_8BIT8-bit ±10%min 40 · typ 50 · max 60 %137
Duty cycle (steady state) ±500 ppm DSTEADYmin 49.975 · typ 50 · max 50.025 %137
Time to reach the steady state frequency and duty cycle after the first transition tSTEADYmax 1.4 ms137
Resistor bridge for VBAT Rtyp 50 K145
Ratio on VBAT measurement Qtyp 4 -145
Error on Q Ermin -1 · max 1 %145
ADC sampling time when reading the VBAT 1 mV accuracy TS_vbatmin 5 us145
Internal reference voltage VREFINT–40 °C < TA < +105 °Cmin 1.18 · typ 1.21 · max 1.24 V145
ADC sampling time when reading the internal reference voltage TS_vrefintmin 10 us145
Internal reference voltage spread over the temperature range VRERINT_sVDD = 3 V ±10 mVtyp 3 · max 5 mV145
Temperature coefficient TCoefftyp 30 · max 50 ppm/°C145
Startup time tSTARTtyp 6 · max 10 us145
Analog supply voltage VDDAmax 3.6 V145
Reference supply voltage VREF+VREF+ ≤ VDDAmax 3.6 V145
Ground VSSAmin 0 · max 0 V146
Resistive load RLOADDAC output buffer ON; Connected to VSSAmin 5 kΩ146
Resistive load RLOADDAC output buffer ON; Connected to VDDAmin 25 kΩ146
Impedance output with buffer OFF ROMinimum resistive load between DAC_OUT and VSS for 1% accuracy is 1.5 MΩmax 15 kΩ146
Capacitive load CLOADMaximum capacitive load at DAC_OUT pin when buffer is ONmax 50 pF146
Lower DAC_OUT voltage with buffer ON DAC_OUT minmin 0.2 V146
Lower DAC_OUT voltage with buffer OFF DAC_OUT mintyp 0.5 mV146
DAC DC VREF current consumption in quiescent mode (Standby mode) IVREF+With no load, worst code (0x800) at VREF+ = 3.6 V in terms of DC consumption on the inputstyp 170 · max 240 uA146
DAC DC VREF current consumption in quiescent mode (Standby mode) IVREF+With no load, worst code (0xF1C) at VREF+ = 3.6 V in terms of DC consumption on the inputstyp 50 · max 75 uA146
DAC DC VDDA current consumption in quiescent mode IDDAWith no load, middle code (0x800) on the inputstyp 280 · max 380 uA146
DAC DC VDDA current consumption in quiescent mode IDDAWith no load, worst code (0xF1C) at VREF+ = 3.6 V in terms of DC consumption on the inputstyp 475 · max 625 uA146
Differential non linearity difference between two consecutive code - 1 LSB) DNLDAC in 10-bit configuration; maximum ±0.5 LSBmax 0.5 LSB146
Differential non linearity difference between two consecutive code - 1 LSB) DNLDAC in 12-bit configuration; maximum ±2 LSBmax 2 LSB146

Open-source boards using it

3
  • 4 layers33 × 77 mmELEC3885, the printed circuit board in 3D

    ELEC3885

    frankplow/ELEC3885

    A robust and lightweight helmet-mounted safety camera for cycling

    115 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the STM32F446VET6?

Yes. The symbol is MCU_ST_STM32F4:STM32F446VETx and the footprint Package_QFP:LQFP-100_14x14mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the STM32F446VET6?

LQFP-100(14x14), with 100 pins. Its footprint is drawn on this page.

Where is the STM32F446VET6 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the STM32F446VET6?

JLCPCB lists it as part C91929, with 854 in stock; the sellers' links on this page open their listings.

What can replace the STM32F446VET6?

Parts like it in the library: the GD32F470VIT6 by GigaDevice Semicon Beijing, the STM32H743VIT6 by STMicroelectronics, the STM32H750VBT6 by STMicroelectronics and the AT32F403AVGT7 by ARTERY. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the STM32F446VET6?

3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.