
STL11N3LLH6
STMicroelectronicsExtended
-55℃~+150℃ 1 N-channel 1.69nF 11A 176pF 17nC 1V 290pF 30V 45W 9.5mΩ@4.5V N-Channel VDFN-8-Power MOSFETs ROHS
- Part id
- st/STL11N3LLH6
- Category
- MOSFETs
- Package
- VDFN-8-Power
- Pins
- 9
- In stock
- 45 at JLCPCB (C2965326)
- Used on
- 5 open-source boards
Overview
The STL11N3LLH6 is a MOSFET made by STMicroelectronics in a VDFN-8-Power package with 9 pins. -55℃~+150℃ 1 N-channel 1.69nF 11A 176pF 17nC 1V 290pF 30V 45W 9.5mΩ@4.5V N-Channel VDFN-8-Power MOSFETs ROHS.
PCBKit's library has its footprint (EasyEDA_Cloud:PDFN-8_L3.1-W3.1-P0.65-LS3.4-BL, from EasyEDA), ready for a KiCad board. 45 are in stock at JLCPCB (part C2965326). 5 open-source boards in 4 repositories on GitHub use it.
Symbol
The library has no symbol for this part yet.
Footprint
From the datasheet
10- Drain-source, most
- 30 V · Drain-source voltage, absolute max · p. 3
- Gate-source, most
- 20 V · Gate-source voltage magnitude, absolute max ±20 V · p. 3
- Drain current, most
- 11 A · Continuous drain current, max at Tpcb = 25 °C · p. 3
- Junction, hottest
- 150 °C · Operating junction temperature, max · p. 3
- Junction to case (PowerFLAT™ 3.3x3.3)
- 2.8 K/W · Thermal resistance junction-case · p. 3
- Junction to board (PowerFLAT™ 3.3x3.3)
- 42.8 K/W · Thermal resistance junction-pcb; FR-4, 1 inch², 2oz Cu, t < 10 s · p. 3
- On resistance
- 6 mΩ · VGS = 10 V, ID = 5.5 A, typical · p. 4
- On resistance
- 8.4 mΩ · VGS = 4.5 V, ID = 5.5 A, typical · p. 4
- Edge
- 12 ns · Fall time, typical; VDD = 15 V, ID = 5.5 A, RG = 4.7 Ω, VGS = 10 V · p. 5
- Forward voltage
- 1.1 V · Source-drain diode, max at ISD = 11 A, VGS = 0 V; pulsed · p. 5
What it is and has
5- On-resistance
- Very low · p. 1
- Gate charge
- Very low · p. 1
- Avalanche ruggedness
- High · p. 1
- Gate drive power loss
- Low · p. 1
- Package
- PowerFLAT™ 3.3x3.3 · p. 1
Specifications
34| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Drain-source voltage VDS | max 30 V | 3 | |
| Gate-source voltage VGS | ±20 V | min -20 · max 20 V | 3 |
| Drain current (continuous) at Tpcb = 25 °C ID | Rated according to Rthj-pcb | max 11 A | 3 |
| Drain current (continuous) at Tpcb = 100 °C ID | Rated according to Rthj-pcb | max 6.9 A | 3 |
| Drain current (pulsed) IDM | Pulse width limited by safe operating area | max 44 A | 3 |
| Total dissipation at Tpcb = 25 °C PTOT | Rated according to Rthj-pcb | max 2.9 W | 3 |
| Total dissipation at TC = 25 °C PTOT | Rated according to Rthj-c | max 45 W | 3 |
| Operating junction temperature range Tj | min -55 · max 150 °C | 3 | |
| Storage temperature range Tstg | min -55 · max 150 °C | 3 | |
| Thermal resistance junction-case Rthj-case | PowerFLAT™ 3.3x3.3; stated Value | typ 2.8 °C/W | 3 |
| Thermal resistance junction-pcb Rthj-pcb | PowerFLAT™ 3.3x3.3; mounted on FR-4 board of 1 inch², 2oz Cu, t < 10 s; stated Value | typ 42.8 °C/W | 3 |
| Single pulse avalanche energy EAS | starting TJ = 25 °C, ID = 5.5 A, L = 6 mH | max 90 mJ | 3 |
| Drain-source breakdown voltage V(BR)DSS | TC = 25 °C; ID = 250 uA, VGS = 0 V | min 30 V | 4 |
| Zero gate voltage drain current IDSS | TC = 25 °C; VGS = 0 V, VDS = 30 V | max 1 uA | 4 |
| Zero gate voltage drain current IDSS | VGS = 0 V, VDS = 30 V, TC = 125 °C; defined by design, not subject to production test | max 10 uA | 4 |
| Gate-body leakage current IGSS | TC = 25 °C; VGS = ±20 V, VDS = 0 V; maximum magnitude ±100 nA | max 100 nA | 4 |
| Gate threshold voltage VGS(th) | TC = 25 °C; VDS = VGS, ID = 250 uA | min 1 V | 4 |
| Static drain-source on-resistance RDS(on) | TC = 25 °C; VGS = 10 V, ID = 5.5 A | typ 6 · max 7.5 mΩ | 4 |
| Static drain-source on-resistance RDS(on) | TC = 25 °C; VGS = 4.5 V, ID = 5.5 A | typ 8.4 · max 9.5 mΩ | 4 |
| Input capacitance Ciss | TC = 25 °C; VDS = 25 V, f = 1 MHz, VGS= 0 V | typ 1690 pF | 4 |
| Output capacitance Coss | TC = 25 °C; VDS = 25 V, f = 1 MHz, VGS= 0 V | typ 290 pF | 4 |
| Reverse transfer capacitance Crss | TC = 25 °C; VDS = 25 V, f = 1 MHz, VGS= 0 V | typ 176 pF | 4 |
| Total gate charge Qg | TC = 25 °C; VDD = 15 V, ID = 11 A, VGS = 0 to 4.5 V; see Figure 14 | typ 17 nC | 4 |
| Gate-source charge Qgs | TC = 25 °C; VDD = 15 V, ID = 11 A, VGS = 0 to 4.5 V; see Figure 14 | typ 8 nC | 4 |
| Gate-drain charge Qgd | TC = 25 °C; VDD = 15 V, ID = 11 A, VGS = 0 to 4.5 V; see Figure 14 | typ 7 nC | 4 |
| Gate input resistance charge RG | TC = 25 °C; f=1 MHz Gate DC Bias = 0; Test signal level = 20 mV; open drain | typ 1.7 Ω | 4 |
| Turn-on delay time td(on) | TC = 25 °C; VDD = 15 V, ID = 5.5 A, RG = 4.7 Ω, VGS = 10 V; see Figure 13 | typ 9.5 ns | 5 |
| Rise time tr | TC = 25 °C; VDD = 15 V, ID = 5.5 A, RG = 4.7 Ω, VGS = 10 V; see Figure 13 | typ 30 ns | 5 |
| Turn-off delay time td(off) | TC = 25 °C; VDD = 15 V, ID = 5.5 A, RG = 4.7 Ω, VGS = 10 V; see Figure 13 | typ 37 ns | 5 |
| Fall time tf | TC = 25 °C; VDD = 15 V, ID = 5.5 A, RG = 4.7 Ω, VGS = 10 V; see Figure 13 | typ 12 ns | 5 |
| Forward on voltage VSD | TC = 25 °C; ISD = 11 A, VGS = 0 V; pulsed: pulse duration = 300 us, duty cycle 1.5% | max 1.1 V | 5 |
| Reverse recovery time trr | TC = 25 °C; ID = 11 A, di/dt = 100 A/us, VDD = 24 V | typ 24 ns | 5 |
| Reverse recovery charge Qrr | TC = 25 °C; ID = 11 A, di/dt = 100 A/us, VDD = 24 V | typ 16.8 nC | 5 |
| Reverse recovery current IRRM | TC = 25 °C; ID = 11 A, di/dt = 100 A/us, VDD = 24 V | typ 1.4 A | 5 |
Ordering codes, by the datasheet
1- STL11N3LLH6
- PowerFLATTM 3.3x3.3 · Marking 11N3L; tape and reel · p. 1
Open-source boards using it
5- 4 layers90.3 × 94.6 mm

- 4 layers79.4 × 56.2 mm

USBLabTool
bradencamp/ECE-Lab-USB-MultiTool
This USB Multi-function Laboratory Instrument will be inexpensive and therefore less capable than the AD2 or ADALM 2000 while still fulfilling the requirements for most laboratory exercises in the undergraduate ECE…
250 parts1 - 4 layers35 × 35 mm

Canonical
AnasSarkiz/smart-nema14-motor-controller
STEPPERONLINE 14HM11-0404S controller — unrouted work-in-progress prototype; mechanical and electrical qualification pending
213 parts - 6 layers45 × 115 mm

- 4 layers

USBLabTool
bradencamp/ECE-Lab-USB-MultiTool
This USB Multi-function Laboratory Instrument will be inexpensive and therefore less capable than the AD2 or ADALM 2000 while still fulfilling the requirements for most laboratory exercises in the undergraduate ECE…
228 parts1
Parts like it
8ASDM40N40E-R
DFN3.3x3.3-8-55℃~+150℃ 1 N-channel 1.733nF 141pF 2.4V 23nC@10V 40A 40V 65W 8.5mΩ@10V DFN3.3x3.3-8 MOSFETs ROHSASDsemiMOSFETsCJAB55P03A
PDFNWB3.3x3.3-8L-55℃~+150℃ 1 P-Channel 282pF 3.259nF 30V 30nC@10V 50W 55A 8.4mΩ@4.5V PDFNWB3.3x3.3-8L MOSFETs ROHSJiangsu Changjing Electronics Technology (CJ)MOSFETsMOT3150J
PDFN3X3-8L-55℃~+150℃ 1 N-channel 1.4nF 177pF 2.5V 30V 4.5mΩ@10V 40nC@10V 65A 65W PDFN3X3-8L MOSFETs ROHSMOTMOSFETsWMQ50P03T1
DFN-8(3x3)-55℃~+150℃ 1 P-Channel 14mΩ@4.5V 2.5V 3.52nF 30V 35nC@10V 370pF 465pF 50A 69W P-Channel DFN-8(3x3) MOSFETs ROHSWayonMOSFETs80N03D
PDFN3x3-8LMOSFETsHLAONR36366
DFN-8(3x3)-55℃~+150℃ 1 N-channel 1.7V 1.835nF 2.8mΩ@10V 24nC@10V 30V 34A 45pF 480pF 62W N-Channel DFN-8(3x3) MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsAPG035N04Q
PDFN3x3-8L-55℃~+150℃ 1 N-channel 1.28nF 100A 20.3nC@10V 22pF 40V 51.6W PDFN3x3-8L MOSFETs ROHSALLPOWERMOSFETsDMN3008SFG-HXY
DFN-8L(3x3)-55℃~+150℃ 1 N-channel 100A 2.5V 3.075nF 30V 31.6nC@4.5V 315pF 400pF 5.5mΩ@10V 62.5W DFN-8L(3x3) MOSFETs ROHSHXY MOSFETMOSFETs
Questions
Is there a KiCad symbol and footprint for the STL11N3LLH6?
Yes. the footprint EasyEDA_Cloud:PDFN-8_L3.1-W3.1-P0.65-LS3.4-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the STL11N3LLH6?
VDFN-8-Power, with 9 pins. Its footprint is drawn on this page.
Where is the STL11N3LLH6 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the STL11N3LLH6?
JLCPCB lists it as part C2965326, with 45 in stock; the sellers' links on this page open their listings.
What can replace the STL11N3LLH6?
Parts like it in the library: the ASDM40N40E-R by ASDsemi, the CJAB55P03A by Jiangsu Changjing Electronics Technology (CJ), the MOT3150J by MOT and the WMQ50P03T1 by Wayon. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the STL11N3LLH6?
5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.