4 layers97 × 105.5 mm
STARDRIVE SHIELD V1 0
themarcolab/Stardrive-Shield
With STARDRIVE SHIELD you can implement from 6 step to FOC motor control algorithms.
193 parts2
STDRIVE101
STMicroelectronicsExtended
-40℃~+125℃ 0V~800mV 1.7mA 2V~5V 3 5.5V~75V 600mA 600mA Enable shutdown、Interleaved conduction protection、Dead-time control、Overcurrent Protection、Built-in bootstrap diode Half-Bridge MOSFET VFQFPN-24(4x4) Gate Drivers ROHS
- Part id
- st/STDRIVE101
- Category
- Gate Drivers
- Package
- VFQFPN-24(4x4)
- Pins
- 25
- In stock
- 441 at JLCPCB (C2969847)
- Used on
- 1 open-source board
Overview
The STDRIVE101 is a gate Driver made by STMicroelectronics in a VFQFPN-24(4x4) package with 25 pins. -40℃~+125℃ 0V~800mV 1.7mA 2V~5V 3 5.5V~75V 600mA 600mA Enable shutdown、Interleaved conduction protection、Dead-time control、Overcurrent Protection、Built-in bootstrap diode Half-Bridge MOSFET VFQFPN-24(4x4) Gate Drivers ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:STDRIVE101, from EasyEDA) and its footprint (EasyEDA_Cloud:QFN-24_L4.0-W4.0-P0.50-BL-EP2.7, from EasyEDA), ready for a KiCad board. 441 are in stock at JLCPCB (part C2969847). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
Pinout
25| Pin | Name | Type |
|---|---|---|
| 1 | CP | Unspecified |
| 2 | DT/MODE | Unspecified |
| 3 | SCREF | Unspecified |
| 4 | VS | Unspecified |
| 5 | REG12 | Unspecified |
| 6 | nFAULT | Unspecified |
| 7 | INH1/IN1 | Unspecified |
| 8 | INH2/IN2 | Unspecified |
| 9 | INH3/IN3 | Unspecified |
| 10 | INL1/EN1 | Unspecified |
| 11 | INL2/EN2 | Unspecified |
| 12 | INL3/EN3 | Unspecified |
| 13 | BOOT3 | Unspecified |
| 14 | GHS3 | Unspecified |
| 15 | OUT3 | Unspecified |
| 16 | GLS3 | Unspecified |
| 17 | BOOT2 | Unspecified |
| 18 | GHS2 | Unspecified |
| 19 | OUT2 | Unspecified |
| 20 | GLS2 | Unspecified |
| 21 | BOOT1 | Unspecified |
| 22 | GHS1 | Unspecified |
| 23 | OUT1 | Unspecified |
| 24 | GLS1 | Unspecified |
| 25 | EP | Unspecified |
Open-source boards using it
1Parts like it
4
JSC1801QFN24(BD)
QFN-24(4x4)QFN-24(4x4) Gate Drivers ROHSCHAMPIGate DriversDRV8300DRGER-JSM
QFN-24-40℃~+125℃ 1.2A 1.5A 150ns 150ns 15ns 40ns 5V~20V 6 700uA IGBT、MOSFET Interleaved conduction protection、Dead-time control、Built-in bootstrap diode Low Side、High Side、Three Phase QFN-24 Gate Drivers ROHSJSMSEMIGate DriversSTDRIVE101TR
VFQFPN-24-40℃~+125℃ 0V~800mV 1.7mA 2V~5V 5.5V~75V 600mA 600mA Half-Bridge MOSFET Over Current Protection、Overtemperature protection (OTP)、Enable shutdown、Interleaved conduction protection、Dead-time control、Overcurrent Protection、Built-in bootstrap diode VFQFPN-24 Gate Drivers ROHSSTMicroelectronicsGate DriversFAN8841MPX
QFN-24-EP(4x4)-40℃~+125℃ 2 2.8V~5V 200mΩ QFN-24-EP(4x4) Relay / Coil Drivers ROHSonsemiGate Drivers
Questions
Is there a KiCad symbol and footprint for the STDRIVE101?
Yes. The symbol is EasyEDA_Cloud:STDRIVE101 and the footprint EasyEDA_Cloud:QFN-24_L4.0-W4.0-P0.50-BL-EP2.7, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the STDRIVE101?
VFQFPN-24(4x4), with 25 pins. Its footprint is drawn on this page.
Where is the STDRIVE101 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the STDRIVE101?
JLCPCB lists it as part C2969847, with 441 in stock; the sellers' links on this page open their listings.
What can replace the STDRIVE101?
Parts like it in the library: the JSC1801QFN24(BD) by CHAMPI, the DRV8300DRGER-JSM by JSMSEMI, the STDRIVE101TR by STMicroelectronics and the FAN8841MPX by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the STDRIVE101?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.