The STA510F is an audio Amplifier made by STMicroelectronics in a BSSOP-36-EP-11mm package with 36 pins. 0℃~+70℃ 1-Channel 10V~40V 200Wx1@4Ω Class D Enable/shutdown function、ESD protection BSSOP-36-EP-11mm Audio Amplifiers ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:STA510FTR, from EasyEDA) and its footprint (EasyEDA_Cloud:POWERSSO-36_L10.3-W7.5-P0.50-LS10.3-TL-CW, from EasyEDA), ready for a KiCad board. 10 are in stock at JLCPCB (part C4990843). 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | GND-SUB | Unspecified |
| 2 | OUT2B | Unspecified |
| 3 | OUT2B | Unspecified |
| 4 | Vcc2B | Unspecified |
| 5 | GND2B | Unspecified |
| 6 | GND2A | Unspecified |
| 7 | Vcc2A | Unspecified |
| 8 | OUT2A | Unspecified |
| 9 | OUT2A | Unspecified |
| 10 | OUT1B | Unspecified |
| 11 | OUT1B | Unspecified |
| 12 | Vcc1B | Unspecified |
| 13 | GND1B | Unspecified |
| 14 | GND1A | Unspecified |
| 15 | Vcc1A | Unspecified |
| 16 | OUT1A | Unspecified |
| 17 | OUT1A | Unspecified |
| 18 | NC | Unspecified |
| 19 | GND-clean | Unspecified |
| 20 | GND-Reg | Unspecified |
| 21 | VDD | Unspecified |
| 22 | VDD | Unspecified |
| 23 | VL | Unspecified |
| 24 | CONFIG | Unspecified |
| 25 | PWRDN | Unspecified |
| 26 | TRI-STATE | Unspecified |
| 27 | FAULT | Unspecified |
| 28 | TH-WAR | Unspecified |
| 29 | IN1A | Unspecified |
| 30 | IN1B | Unspecified |
| 31 | IN2A | Unspecified |
| 32 | IN2B | Unspecified |
| 33 | Vss | Unspecified |
| 34 | Vss | Unspecified |
| 35 | VCCSIGN | Unspecified |
| 36 | VCCSIGN | Unspecified |
alberto-grl/H7RTX-V2-Schematics-PCB
Schematics and PCB for a three-band direct sampling SDR. Using the internal ADC of an MCU, TX power is about 5 W. USB powered. Firmware code: https://github.com/alberto-grl/750RTX
<iframe src="https://pcbkit.io/embed/parts/st/STA510F" title="STA510F in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/st/STA510F.jpg" alt="STA510F" width="1200" height="900">[](https://pcbkit.io/parts/st/STA510F)Yes. The symbol is EasyEDA_Cloud:STA510FTR and the footprint EasyEDA_Cloud:POWERSSO-36_L10.3-W7.5-P0.50-LS10.3-TL-CW, both drawn on this page. PCBKit places them on a board for you when you design with it.
BSSOP-36-EP-11mm, with 36 pins. Its footprint is drawn on this page.
STMicroelectronics publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C4990843, with 10 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the TDA7492E by STMicroelectronics and the TDA7498MV by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.
