STA333W13
STMicroelectronicsExtended
0.05% 0℃~+70℃ 2-Channel 4.5V~20V 80dB 90% 90dB Automatic mute/no-noise switch、Digitally programmable gain Power-SSO-36-EPD Audio Amplifiers ROHS
- Part id
- st/STA333W13
- Category
- Audio Amplifiers
- Package
- Power-SSO-36-EPD
- Pins
- 37
- In stock
- 10 at JLCPCB (C2651254)
Overview
The STA333W13 is an audio Amplifier made by STMicroelectronics in a Power-SSO-36-EPD package with 37 pins. 0.05% 0℃~+70℃ 2-Channel 4.5V~20V 80dB 90% 90dB Automatic mute/no-noise switch、Digitally programmable gain Power-SSO-36-EPD Audio Amplifiers ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:STA333W13TR, from EasyEDA) and its footprint (EasyEDA_Cloud:POWERSSO-36_L10.3-W7.5-P0.50-LS10.2-BL-EP, from EasyEDA), ready for a KiCad board. 10 are in stock at JLCPCB (part C2651254).
Symbol
Footprint
Pinout
37| Pin | Name | Type |
|---|---|---|
| 1 | GND_SUB | Unspecified |
| 2 | SA | Unspecified |
| 3 | TEST_MODE | Unspecified |
| 4 | VSS | Unspecified |
| 5 | VCC_REG | Unspecified |
| 6 | OUT2B | Unspecified |
| 7 | GND2 | Unspecified |
| 8 | VCC2 | Unspecified |
| 9 | OUT2A | Unspecified |
| 10 | OUT1B | Unspecified |
| 11 | VCC1 | Unspecified |
| 12 | GND1 | Unspecified |
| 13 | OUT1A | Unspecified |
| 14 | GND_REG | Unspecified |
| 15 | VDD_REG | Unspecified |
| 16 | CONFIG | Unspecified |
| 17 | N.C. | Unspecified |
| 18 | N.C. | Unspecified |
| 19 | N.C. | Unspecified |
| 20 | N.C. | Unspecified |
| 21 | VDD_DIG | Unspecified |
| 22 | GND_DIG | Unspecified |
| 23 | PWRDN | Unspecified |
| 24 | VDD_PLL | Unspecified |
| 25 | FILTER_PLL | Unspecified |
| 26 | GND_PLL | Unspecified |
| 27 | XTI | Unspecified |
| 28 | BICKI | Unspecified |
| 29 | LRCKI | Unspecified |
| 30 | SDI | Unspecified |
| 31 | RESET | Unspecified |
| 32 | INT_LINE | Unspecified |
| 33 | SDA | Unspecified |
| 34 | SCL | Unspecified |
| 35 | GND_DIG | Unspecified |
| 36 | VDD_DIG | Unspecified |
| 37 | EP | Unspecified |
Parts like it
4
STA333ML13
Power-SSO-36-EPD0.05% 0℃~+70℃ 100dB 2-Channel 20Wx2@8Ω 4.5V~20V 80dB 90% Automatic mute/no-noise switch、Enable/shutdown function、Filterless architecture、Overvoltage protection、Digitally programmable gain、Built-in audio processing、Integrated PLL Class D Power-SSO-36-EPD Audio Amplifiers ROHSSTMicroelectronicsAudio AmplifiersSTA335BWJ
-Audio AmplifiersSTMicroelectronicsSTA369BW
Power-SSO-36-EPDAutomatic mute/no-noise switch、Enable/shutdown function、Digitally programmable gain、Built-in audio processing、Integrated PLL Power-SSO-36-EPD Audio Amplifiers ROHSSTMicroelectronicsAudio AmplifiersTDA7492PE
Power-SSO-36Audio AmplifiersSTMicroelectronics
Questions
Is there a KiCad symbol and footprint for the STA333W13?
Yes. The symbol is EasyEDA_Cloud:STA333W13TR and the footprint EasyEDA_Cloud:POWERSSO-36_L10.3-W7.5-P0.50-LS10.2-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the STA333W13?
Power-SSO-36-EPD, with 37 pins. Its footprint is drawn on this page.
Where is the STA333W13 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the STA333W13?
JLCPCB lists it as part C2651254, with 10 in stock; the sellers' links on this page open their listings.
What can replace the STA333W13?
Parts like it in the library: the STA333ML13 by STMicroelectronics, the STA335BWJ by STMicroelectronics, the STA369BW by STMicroelectronics and the TDA7492PE by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.