4 layers99.1 × 53.3 mm
Stm32h743 can hs
Kevinbot-Robotics/stm32h743_can_hs_dev
An STM32H743 development board with on-board USB-HS and CAN-FD (up to 8Mbit/s)
102 partsGPL-3.0
ST1S40IPHR
STMicroelectronicsExtended
-40℃~+150℃ 1 2.5mA 3A 4V~18V 800mV~18V 850kHz Adjustable Buck Built-in Overcurrent Protection、Cycle-by-cycle current limiting Step-down type Yes HSOP-8-EP DC-DC Converters ROHS
- Part id
- st/ST1S40IPHR
- Category
- DC DC Converters
- Package
- HSOP-8-EP
- Pins
- 8
- In stock
- 0 at JLCPCB (C2070599)
- Used on
- 1 open-source board
Overview
The ST1S40IPHR is a DC DC Converter made by STMicroelectronics in a HSOP-8-EP package with 9 pins. -40℃~+150℃ 1 2.5mA 3A 4V~18V 800mV~18V 850kHz Adjustable Buck Built-in Overcurrent Protection、Cycle-by-cycle current limiting Step-down type Yes HSOP-8-EP DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ST1S41PHR, from EasyEDA) and its footprint (EasyEDA_Cloud:HSOP-8_L5.0-W4.0-P1.27-LS6.2-BL-EP, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C2070599). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
Pinout
9| Pin | Name | Type |
|---|---|---|
| 1 | VINA | Unspecified |
| 2 | EN | Unspecified |
| 3 | FB | Unspecified |
| 4 | GND | Unspecified |
| 5 | NC | Unspecified |
| 6 | VINSW | Unspecified |
| 7 | SW | Unspecified |
| 8 | PGND | Unspecified |
| 9 | EP | Unspecified |
Open-source boards using it
1Parts like it
8
TPS54327DDAR
HSOP-8-EP-40℃~+85℃@(TA) 1 3A 4.5V~18V 700kHz 760mV~7V Adjustable Buck Buck Built-in Yes HSOP-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS5432DDAR
HSOP-8-EP-40℃~+125℃@(TJ) 1 2.95V~6V 360uA 3A 700kHz 808mV~4.5V Adjustable Buck Buck Built-in Yes HSOP-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS54428DDAR
HSOP-8-EP-40℃~+85℃ 1 10uA 4.5V~18V 4A 650kHz 760mV~7V Adjustable Buck Buck Built-in Yes HSOP-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersPAM2320BECADJR
HSOP-8-EP-40℃~+125℃ 1 1.5MHz 2.7V~5.5V 3A 42uA 600mV~5.5V Adjustable Buck Buck Built-in HSOP-8-EP DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersA5975D
SOIC-8-40℃~+150℃@(TJ) 1 1.235V~35V 250kHz 3A 3mA 4V~36V Adjustable Buck Buck Built-in No SOIC-8 DC-DC Converters ROHSSTMicroelectronicsDC-DC ConvertersL7986TA
HSOP-8-EP-40℃~+150℃@(TJ) 1 1MHz 3A 4.5V~38V 600mV~38V Adjustable Buck Buck Built-in No HSOP-8-EP DC-DC Converters ROHSSTMicroelectronicsDC-DC ConvertersA7986A
HSOP-8-EP-40℃~+150℃@(TJ) 1 2.4mA 250kHz 3A 4.5V~38V 600mV~38V Adjustable Buck Built-in No Overcurrent Protection、Cycle-by-cycle current limiting、Frequency synchronization、External compensation Step-down type HSOP-8-EP DC-DC Converters ROHSSTMicroelectronicsDC-DC ConvertersA7986ATR
SOIC-8-40℃~+150℃@(TJ) 1 250kHz 3A 4.5V~38V 600mV~38V Adjustable Buck Buck Built-in No SOIC-8 DC-DC Converters ROHSSTMicroelectronicsDC-DC Converters
Questions
Is there a KiCad symbol and footprint for the ST1S40IPHR?
Yes. The symbol is EasyEDA_Cloud:ST1S41PHR and the footprint EasyEDA_Cloud:HSOP-8_L5.0-W4.0-P1.27-LS6.2-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ST1S40IPHR?
HSOP-8-EP, with 9 pins. Its footprint is drawn on this page.
Where is the ST1S40IPHR datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the ST1S40IPHR?
JLCPCB lists it as part C2070599, with 0 in stock; the sellers' links on this page open their listings.
What can replace the ST1S40IPHR?
Parts like it in the library: the TPS54327DDAR by Texas Instruments, the TPS5432DDAR by Texas Instruments, the TPS54428DDAR by Texas Instruments and the PAM2320BECADJR by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the ST1S40IPHR?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.