
MLPF-WB-01D3
STMicroelectronicsExtended
-40℃~+105℃ 1.1dB 2.4GHz~2.5GHz 50Ω Low Pass CSPG-6 RF Filters ROHS
- Part id
- st/MLPF-WB-01D3
- Category
- RF Filters
- Package
- CSPG-6
- Pins
- 6
- In stock
- 148 at JLCPCB (C5440144)
- Used on
- 1 open-source board
Overview
The MLPF-WB-01D3 is a RF Filter made by STMicroelectronics in a CSPG-6 package with 6 pins. -40℃~+105℃ 1.1dB 2.4GHz~2.5GHz 50Ω Low Pass CSPG-6 RF Filters ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MLPF-WB-01D3, from EasyEDA) and its footprint (EasyEDA_Cloud:BGA-6_L1.6-W1.0-R3-C2-P0.50-TL, from EasyEDA), ready for a KiCad board. 148 are in stock at JLCPCB (part C5440144). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
Pinout
6| Pin | Name | Type |
|---|---|---|
| A1 | OUT | Unspecified |
| A2 | GND4 | Unspecified |
| A3 | IN | Unspecified |
| B1 | GND3 | Unspecified |
| B2 | GND2 | Unspecified |
| B3 | GND1 | Unspecified |
Open-source boards using it
1- 4 layers127.9 × 78.5 mm

Parts like it
8MLPF-NRG-01D3
WFBGA-6-40℃~+105℃ 1.1dB 50Ω Low Pass WFBGA-6 RF Filters ROHSSTMicroelectronicsRF FiltersMLPF-WB-02D3
WFBGA-6-40℃~+105℃ 1.2dB 2.4GHz~2.5GHz 50Ω Low Pass WFBGA-6 RF Filters ROHSSTMicroelectronicsRF FiltersLFB152G45CB2D320
SMD-4P,1x0.5mm-40℃~+85℃ 1.7dB 2.45GHz 2.4GHz~2.5GHz 50Ω Bandpass SMD-4P,1x0.5mm RF Filters ROHSMurataRF FiltersRFBPF1608060K98Q1C
SMD-3P,1.6x0.8mm-40℃~+85℃ 0.6dB 40dB 5.15GHz~5.95GHz 50Ω Bandpass SMD-3P,1.6x0.8mm RF Filters ROHSWalsin TechnologyRF FiltersDEA100915LT-6319A1
SMD-4P,0.5x1mm0.5dB Low Pass SMD-4P,0.5x1mm RF Filters ROHSTDKRF FiltersDEA160960LT-5059A1
SMD-4P,1.6x0.8mm-40℃~+90℃ 0.28dB 23.6dB 50Ω 698MHz~960MHz Low Pass SMD-4P,1.6x0.8mm RF Filters ROHSTDKRF FiltersDLF162500LT-5028A1
SMD-4P,1.6x0.8mm-40℃~+85℃ 0.33dB 2.4GHz~2.5GHz 49.2dB 50Ω Low Pass SMD-4P,1.6x0.8mm RF Filters ROHSTDKRF FiltersDEA102700LT-6307A2
SMD-4P,1x0.5mm-40℃~+85℃ 0.45dB 2.4GHz~2.7GHz 26dB 50Ω Low Pass SMD-4P,1x0.5mm RF Filters ROHSTDKRF Filters
Questions
Is there a KiCad symbol and footprint for the MLPF-WB-01D3?
Yes. The symbol is EasyEDA_Cloud:MLPF-WB-01D3 and the footprint EasyEDA_Cloud:BGA-6_L1.6-W1.0-R3-C2-P0.50-TL, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MLPF-WB-01D3?
CSPG-6, with 6 pins. Its footprint is drawn on this page.
Where is the MLPF-WB-01D3 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the MLPF-WB-01D3?
JLCPCB lists it as part C5440144, with 148 in stock; the sellers' links on this page open their listings.
What can replace the MLPF-WB-01D3?
Parts like it in the library: the MLPF-NRG-01D3 by STMicroelectronics, the MLPF-WB-02D3 by STMicroelectronics, the LFB152G45CB2D320 by Murata and the RFBPF1608060K98Q1C by Walsin Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MLPF-WB-01D3?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.