Skip to the content
12345678

M24C01-RMN6P

STMicroelectronicsExtended

-40℃~+85℃ 1.8V~5.5V 1Kbit 200 Years 4,000,000 Cycles 400kHz 5ms I2C Power-down/Power-up protection circuit SO-8 EEPROM ROHS

Part id
st/M24C01-RMN6P
Category
EEPROM
Package
SO-8
Pins
2
In stock
1 at JLCPCB (C1349654)
Used on
6 open-source boards

Overview

The M24C01-RMN6P is an EEPROM made by STMicroelectronics in a SO-8 package with 8 pins. -40℃~+85℃ 1.8V~5.5V 1Kbit 200 Years 4,000,000 Cycles 400kHz 5ms I2C Power-down/Power-up protection circuit SO-8 EEPROM ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:M24512-HRDW6TP, from EasyEDA) and its footprint (Package_SO:SO-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 1 are in stock at JLCPCB (part C1349654). 6 open-source boards in 4 repositories on GitHub use it.

Symbol

1E02E13E24VSS5SDA6SCL7WC#8VCC
EasyEDA_Cloud:M24512-HRDW6TPFrom EasyEDA

Footprint

12345678
Package_SO:SO-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the M24C01-RMN6P
PinNameType
1E0Unspecified
2E1Unspecified
3E2Unspecified
4VSSUnspecified
5SDAUnspecified
6SCLUnspecified
7WC#Unspecified
8VCCUnspecified

Open-source boards using it

6
  • 2 layers36.8 × 37 mmFlopagon, the printed circuit board in 3D

    Flopagon

    hairymnstr/Flopagon

    A floppy disk styled flash storage device for the EMF Camp Tildagon

    17 parts12CERN-OHL-P-2.0
  • 4 layers85 × 54 mmManila ice, the printed circuit board in 3D

    Manila ice

    joshtyler/manila-ice

    Lattice iCE HX4K Development Board

    158 parts10
  • 2 layers94 × 54 mmReflow master, the printed circuit board in 3D

    Reflow master

    electrodonkey/roza_reflow_hw

    Reflow controller

    102 partsMIT
  • 2 layers85 × 170 mmCore64 LB v0.4, the printed circuit board in 3D

    Core64 LB v0.4

    ageppert/Core-64-Interactive-Core-Memory-Badge

    64 bits of core memory and LEDs to interact with directly using a magnetic wand.

    146 parts17GPL-3.0
  • 2 layers85 × 170 mmCore64 LB v0.5, the printed circuit board in 3D

    Core64 LB v0.5

    ageppert/Core-64-Interactive-Core-Memory-Badge

    64 bits of core memory and LEDs to interact with directly using a magnetic wand.

    153 parts17GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the M24C01-RMN6P?

Yes. The symbol is EasyEDA_Cloud:M24512-HRDW6TP and the footprint Package_SO:SO-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the M24C01-RMN6P?

SO-8, with 8 pins. Its footprint is drawn on this page.

Where is the M24C01-RMN6P datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the M24C01-RMN6P?

JLCPCB lists it as part C1349654, with 1 in stock; the sellers' links on this page open their listings.

What can replace the M24C01-RMN6P?

Parts like it in the library: the 24LC16BH-I/SN by Microchip Technology, the 24AA02E48-E/SN by Microchip Technology, the 24LC21A/SN by Microchip Technology and the 24AA02E64-E/SN by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the M24C01-RMN6P?

6 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.