LSM303DLH
STMicroelectronicsExtended
-30℃~+85℃ 16bit 2.5V~3.3V 3uA Accelerometer I2C X,Y,Z ±8g 运动事件检测 LGA-28(5x5) Accelerometers ROHS
- Part id
- st/LSM303DLH
- Category
- Accelerometers
- Package
- LGA-28(5x5)
- Pins
- 28
- In stock
- 0 at JLCPCB (C2682481)
Overview
The LSM303DLH is an accelerometer made by STMicroelectronics in a LGA-28(5x5) package with 28 pins. -30℃~+85℃ 16bit 2.5V~3.3V 3uA Accelerometer I2C X,Y,Z ±8g 运动事件检测 LGA-28(5x5) Accelerometers ROHS.
PCBKit's library has its KiCad symbol (tinkerforge:LSM303DLH, from Tinkerforge) and its footprint (Package_LGA:LGA-28_5.2x3.8mm_P0.5mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2682481).
Symbol
Footprint
Pinout
28| Pin | Name | Type |
|---|---|---|
| 1 | RES | Input |
| 2 | GND | Passive |
| 3 | RES | Input |
| 4 | SA0_A | Passive |
| 5 | RES | Input |
| 6 | VDD | Power in |
| 7 | RES | Input |
| 8 | NC | Input |
| 9 | NC | Input |
| 10 | RES | Passive |
| 11 | RES | Passive |
| 12 | SET2 | Passive |
| 13 | RES | Passive |
| 14 | RES | Passive |
| 15 | C1 | Passive |
| 16 | SET1 | Passive |
| 17 | RES | Passive |
| 18 | DRDY_M | Passive |
| 19 | SDA_M | Passive |
| 20 | SCL_M | Passive |
| 21 | Vdd_dig_M | Passive |
| 22 | Vdd_IO_A | Passive |
| 23 | RES | Passive |
| 24 | SCL_A | Passive |
| 25 | SDA_A | Passive |
| 26 | INT1 | Passive |
| 27 | INT2 | Passive |
| 28 | RES | Passive |
Parts like it
4
BNO055
LGA-28(3.8x5.2)-40℃~+85℃ 2.4V~3.6V 40uA I2C、UART IMU X,Y,Z X,Y,Z ±16g ±2000dps LGA-28(3.8x5.2) Accelerometers ROHSBosch SensortecAccelerometersBNO085
LGA-28(3.8x5.2)1.65V~3.6V 12bit、16bit IMU (accelerometer + gyroscope) SPI、I2C、UART X,Y,Z X,Y,Z ±2000dps ±8g LGA-28(3.8x5.2) Accelerometers ROHSCEVAAccelerometersBMF055
LGA-28(3.8x5.2)-40℃~+85℃ 120uA 14bit、16bit 2.4V~3.6V IMU (accelerometer + gyroscope) SPI、I2C、UART X,Y,Z X,Y,Z ±16g ±2000dps LGA-28(3.8x5.2) Accelerometers ROHSBosch SensortecAccelerometersBNO080
LGA-28(5.2x3.8)-40℃~+85℃ 1.5uA、1.9uA 1.65V~3.6V、2.4V~3.6V 12bit、16bit IMU (accelerometer + gyroscope) Motion event detection、Synchronization and timestamp SPI、I2C、UART X,Y,Z X,Y,Z ±2000dps ±8g LGA-28(5.2x3.8) Accelerometers ROHSCEVAAccelerometers
Questions
Is there a KiCad symbol and footprint for the LSM303DLH?
Yes. The symbol is tinkerforge:LSM303DLH and the footprint Package_LGA:LGA-28_5.2x3.8mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LSM303DLH?
LGA-28(5x5), with 28 pins. Its footprint is drawn on this page.
Where is the LSM303DLH datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the LSM303DLH?
JLCPCB lists it as part C2682481, with 0 in stock; the sellers' links on this page open their listings.
What can replace the LSM303DLH?
Parts like it in the library: the BNO055 by Bosch Sensortec, the BNO085 by CEVA, the BMF055 by Bosch Sensortec and the BNO080 by CEVA. Check their datasheets: a part that fits the footprint may still differ in its ratings.