Skip to the content
123345

LF50CPT-TR

STMicroelectronicsExtended

-40℃~+125℃@(Tj) 1 16V 400mV@(500mA) 500mA 500uA 50uV 5V 76dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TO-252-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/LF50CPT-TR
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-252-5
Pins
5
In stock
75 at JLCPCB (C2970955)
Used on
3 open-source boards

Overview

The LF50CPT-TR is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a TO-252-5 package with 5 pins. -40℃~+125℃@(Tj) 1 16V 400mV@(500mA) 500mA 500uA 50uV 5V 76dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TO-252-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LF50CPT-TRY, from EasyEDA) and its footprint (Package_TO_SOT_SMD:TO-252-5_TabPin3, from KiCad's library), ready for a KiCad board. 75 are in stock at JLCPCB (part C2970955). 3 open-source boards in 1 repository on GitHub use it.

Symbol

5VOUT4NC3GND2INHIBIT1VIN
EasyEDA_Cloud:LF50CPT-TRYFrom EasyEDA

Footprint

123345
Package_TO_SOT_SMD:TO-252-5_TabPin3From KiCad's library

From the datasheet

12
Supply, most
16 V · VI, recommended operating max, IO = 500 mA · p. 20
Supply, absolute maximum
40 V · VI, absolute max; shutdown above 18 V · p. 5
Junction, hottest
125 °C · Operating junction temperature max · p. 5
Takes working
500 µA · Quiescent current typical, ON mode, IO = 0 mA, VI = 6 to 16 V · p. 20
Takes asleep
50 µA · Quiescent current typical, OFF mode, VI = 6 V · p. 20
Gives
500 mA · Rated output current max · p. 1
Current limit
1 A · Output current limit typical · p. 20
Output
5 V · Output voltage typical, IO = 50 mA, VI = 7 V, TJ = 25 °C · p. 20
Dropout
200 mV · Dropout voltage typical, IO = 200 mA · p. 20
Dropout
400 mV · Dropout voltage typical, IO = 500 mA · p. 20
Junction to case (DPAK/PPAK)
8 K/W · Thermal resistance junction-case · p. 5
Junction to air (DPAK/PPAK)
100 K/W · Thermal resistance junction-ambient · p. 5

What it is and has

4
Output current
Up to 500 mA · p. 1
Shutdown
Logic-controlled electronic shutdown · p. 1
Protection
Internal current and thermal limit · p. 1
Stability capacitance
2.2 µF · p. 1

Specifications

27
ParameterConditionsAs printedPage
DC input voltage VIFor 18 < VI < 40 the regulator is in shutdown.min -0.5 · max 40 V5
Storage temperature range TSTGmin -40 · max 150 °C5
Operating junction temperature range TOPmin -40 · max 125 °C5
Thermal resistance junction-case RthJCDPAK/PPAKmax 8 °C/W5
Thermal resistance junction-ambient RthJADPAK/PPAKmax 100 °C/W5
Output voltage VOTJ = 25 °C, CI = 0.1 uF, CO = 2.2 uF; IO = 50 mA, VI = 7 Vmin 4.9 · typ 5 · max 5.1 V20
Output voltage VOCI = 0.1 uF, CO = 2.2 uF; IO = 50 mA, VI = 7 V, Ta = -25 to 85 °Cmin 4.8 · max 5.2 V20
Operating input voltage VITJ = 25 °C, CI = 0.1 uF, CO = 2.2 uF; IO = 500 mAmax 16 V20
Output current limit IOTJ = 25 °C, CI = 0.1 uF, CO = 2.2 uFtyp 1 A20
Line regulation ∆VOTJ = 25 °C, CI = 0.1 uF, CO = 2.2 uF; VI = 6 to 16 V, IO = 5 mAtyp 5 · max 25 mV20
Load regulation ∆VOTJ = 25 °C, CI = 0.1 uF, CO = 2.2 uF; VI = 6.3 V, IO = 5 to 500 mAtyp 5 · max 25 mV20
Quiescent current IdTJ = 25 °C, CI = 0.1 uF, CO = 2.2 uF; ON mode, VI = 6 to 16 V, IO = 0 mAtyp 0.5 · max 1 mA20
Quiescent current IdTJ = 25 °C, CI = 0.1 uF, CO = 2.2 uF; ON mode, VI = 6.3 to 16 V, IO = 500 mAmax 12 mA20
Quiescent current IdTJ = 25 °C, CI = 0.1 uF, CO = 2.2 uF; OFF mode, VI = 6 Vtyp 50 · max 100 uA20
Supply voltage rejection SVRTJ = 25 °C, CI = 0.1 uF, CO = 2.2 uF; IO = 5 mA, VI = 7 ± 1 V, f = 120 Hztyp 76 dB20
Supply voltage rejection SVRTJ = 25 °C, CI = 0.1 uF, CO = 2.2 uF; IO = 5 mA, VI = 7 ± 1 V, f = 1 kHztyp 71 dB20
Supply voltage rejection SVRTJ = 25 °C, CI = 0.1 uF, CO = 2.2 uF; IO = 5 mA, VI = 7 ± 1 V, f = 10 kHztyp 60 dB20
Output noise voltage eNTJ = 25 °C, CI = 0.1 uF, CO = 2.2 uF; B = 10 Hz to 100 kHztyp 50 uV20
Dropout voltage VdTJ = 25 °C, CI = 0.1 uF, CO = 2.2 uF; IO = 200 mAtyp 0.2 · max 0.35 V20
Dropout voltage VdTJ = 25 °C, CI = 0.1 uF, CO = 2.2 uF; IO = 500 mAtyp 0.4 · max 0.7 V20
Control input logic low VILCI = 0.1 uF, CO = 2.2 uF; Ta = -40 to 125 °Cmax 0.8 V20
Control input logic high VIHCI = 0.1 uF, CO = 2.2 uF; Ta = -40 to 125 °Cmin 2 V20
Control input current IITJ = 25 °C, CI = 0.1 uF, CO = 2.2 uF; VI = 6 V, VC = 6 Vtyp 10 uA20
Output bypass capacitance COTJ = 25 °C, CI = 0.1 uF; ESR = 0.1 to 10 Ω, IO = 0 to 500 mAmin 2 · typ 10 uF20
Quiescent current IdTJ = 25 °C, CI = 0.1 uF, CO = 2.2 uF; VI = 6 to 16 V, IO = 0 mA, ON modetyp 0.5 · max 1 mA20
Quiescent current IdTJ = 25 °C, CI = 0.1 uF, CO = 2.2 uF; VI = 6.3 to 16 V, IO = 500 mA, ON modemax 12 mA20
Quiescent current IdTJ = 25 °C, CI = 0.1 uF, CO = 2.2 uF; VI = 6 V, OFF modetyp 50 · max 100 uA20

Ordering codes, by the datasheet

1
LF50CPT-TR
PPAK · 5 V output; tape and reel · p. 51

Open-source boards using it

3
  • 2 layers77.1 × 82.9 mmEspio, the printed circuit board in 3D

    Espio

    TheLexoPlexx/espio

    155 parts
  • 2 layers77.3 × 69.7 mmEspio, the printed circuit board in 3D

    Espio

    TheLexoPlexx/espio

    58 parts
  • 2 layers77.1 × 69.7 mmEspio v2 5, the printed circuit board in 3D

    Espio v2 5

    TheLexoPlexx/espio

    78 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LF50CPT-TR?

Yes. The symbol is EasyEDA_Cloud:LF50CPT-TRY and the footprint Package_TO_SOT_SMD:TO-252-5_TabPin3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LF50CPT-TR?

TO-252-5, with 5 pins. Its footprint is drawn on this page.

Where is the LF50CPT-TR datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LF50CPT-TR?

JLCPCB lists it as part C2970955, with 75 in stock; the sellers' links on this page open their listings.

What can replace the LF50CPT-TR?

Parts like it in the library: the LF50ABPT-TR by STMicroelectronics, the LD29150PT50R by STMicroelectronics, the AMS1117-5.0 by Advanced Monolithic Systems and the L78M05ABDT-TR by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LF50CPT-TR?

3 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.