Skip to the content
1234567

LDL212PU50R

STMicroelectronicsExtended

-40℃~+125℃@(Tj) 1 1.2A 18V 250uA 350mV@(1.2A) 5V 60uVrms 87dB@(120Hz) Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable DFN-6-EP(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/LDL212PU50R
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
DFN-6-EP(3x3)
Pins
7
In stock
580 at JLCPCB (C2761339)
Used on
4 open-source boards

Overview

The LDL212PU50R is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a DFN-6-EP(3x3) package with 7 pins. -40℃~+125℃@(Tj) 1 1.2A 18V 250uA 350mV@(1.2A) 5V 60uVrms 87dB@(120Hz) Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable DFN-6-EP(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LDL212PU50R, from EasyEDA) and its footprint (EasyEDA_Cloud:VSON-6_L3.0-W3.0-P0.95-TL-EP_TI_DRP, from EasyEDA), ready for a KiCad board. 580 are in stock at JLCPCB (part C2761339). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

7GND1GND4VIN3VOUT5NC2sense6EN
EasyEDA_Cloud:LDL212PU50RFrom EasyEDA

Footprint

1234567
EasyEDA_Cloud:VSON-6_L3.0-W3.0-P0.95-TL-EP_TI_DRPFrom EasyEDA

Pinout

7
The pins of the LDL212PU50R
PinNameType
1GNDUnspecified
2senseUnspecified
3VOUTUnspecified
4VINUnspecified
5NCUnspecified
6ENUnspecified
7GNDUnspecified

Open-source boards using it

4
  • 6 layers122 × 98 mmVNA, the printed circuit board in 3D

    VNA

    jankae/LibreVNA

    100kHz to 6GHz 2 port USB based VNA

    592 parts1.7kGPL-3.0
  • 4 layers70 × 71 mmBotctrl, the printed circuit board in 3D

    Botctrl

    JoeEarlam/Fatal-Deviation

    1.5kg beetleweight combat robot

    156 parts2GPL-3.0
  • 4 layersRasterGenerator, the printed circuit board in 3D

    RasterGenerator

    LukasReil/SEM_Dev

    This project describes a fully open-source electron microscope.

    15 parts
  • 4 layers64 × 40 mmWiringHarness, the printed circuit board in 3D

    WiringHarness

    TadAtThayer/MazeController

    Arduino Shield for ES28 project

    37 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LDL212PU50R?

Yes. The symbol is EasyEDA_Cloud:LDL212PU50R and the footprint EasyEDA_Cloud:VSON-6_L3.0-W3.0-P0.95-TL-EP_TI_DRP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LDL212PU50R?

DFN-6-EP(3x3), with 7 pins. Its footprint is drawn on this page.

Where is the LDL212PU50R datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LDL212PU50R?

JLCPCB lists it as part C2761339, with 580 in stock; the sellers' links on this page open their listings.

What can replace the LDL212PU50R?

Parts like it in the library: the L7805CDT-TR by STMicroelectronics, the L7805CV by STMicroelectronics, the AZ1117CH-5.0TRG1 by Diodes Incorporated and the CJ7805 3% by Jiangsu Changjing Electronics Technology (CJ). Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LDL212PU50R?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.