
Flash
Maka8295/FT2232H-Breakout-board
FT2232H Breakout board with level shifting and selectable io level.
STMicroelectronicsExtended
-40℃~+125℃@(Tj) 1 1.8V 300mA 400mV@(300mA) 5.5V 51uVrms 55dB@(10kHz) 60uA Fixed Positive Short Circuit Protection、Thermal Shutdown SOT-23-5L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS
The LDK130M18R is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a SOT-23-5L package with 5 pins. -40℃~+125℃@(Tj) 1 1.8V 300mA 400mV@(300mA) 5.5V 51uVrms 55dB@(10kHz) 60uA Fixed Positive Short Circuit Protection、Thermal Shutdown SOT-23-5L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:SPX5205M5-L_TR, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 68 are in stock at JLCPCB (part C377955). 2 open-source boards in 2 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| DC input voltage VIN | min -0.3 · max 7 V | 8 | |
| DC output voltage VOUT | Maximum: VI + 0.3 V | min -0.3 V | 8 |
| Enable input voltage VEN | Maximum: VI + 0.3 V | min -0.3 V | 8 |
| ADJ/bypass pin voltage VBYP/ADJ | max 2 V | 8 | |
| Storage temperature range TSTG | min -65 · max 150 °C | 8 | |
| Operating junction temperature range TOP | min -40 · max 125 °C | 8 | |
| Thermal resistance junction ambient RthJA | SOT23-5L | typ 160 °C/W | 8 |
| Thermal resistance junction case RthJC | SOT23-5L | typ 68 °C/W | 8 |
| Operating input voltage VIN | min 1.9 · max 5.5 V | 9 | |
| VOUT accuracy VOUT | IOUT = 1 mA, TJ = 25 °C | min -2 · max 2 % | 9 |
| VOUT accuracy VOUT | IOUT = 1 mA, -40 °C < TJ < 125 °C | min -3 · max 3 % | 9 |
| Static line regulation ΔVOUT | VOUT +1 V ≤ VIN ≤ 5.5 V, IOUT = 1 mA | typ 0.05 %/V | 9 |
| Static load regulation ΔVOUT | IOUT = 1 mA to 300 mA | typ 0.006 %/mA | 9 |
| Dropout voltage(1) VDROP | IOUT = 100 mA, VOUT = 2.5 V | typ 100 mV | 9 |
| Dropout voltage(1) VDROP | IOUT = 300 mA, VOUT = 2.5 V, 40 °C < TJ < 125 °C | typ 200 · max 400 mV | 9 |
| Output noise voltage eN | 10 Hz to 100 kHz, IOUT = 10 mA, VOUT = 2.5 V, CBYP = 10 nF | typ 51 uVRMS/V | 9 |
| Supply voltage rejection SVR | VIN = VOUTNOM +0.5 V ± VRIPPLE; VRIPPLE = 0.1 V freq. = 120 Hz to 10 kHz; IOUT = 10 mA | typ 55 dB | 9 |
| Quiescent current IQ | IOUT = 0 mA, -40 °C < TJ < 125 °C | typ 30 · max 60 uA | 9 |
| Quiescent current IQ | IOUT = 300 mA, -40 °C < TJ < 125 °C | typ 70 · max 120 uA | 9 |
| Quiescent current IQ | VIN input current in OFF mode: VEN = GND | max 1 uA | 9 |
| Short-circuit current ISC | RL = 0 | typ 450 mA | 9 |
| Enable input logic low VEN | VIN = 1.9 V to 5.5 V, -40 °C < TJ < 125 °C | max 0.4 V | 9 |
| Enable input logic high VEN | VIN = 1.9 V to 5.5 V, -40 °C < TJ < 125 °C | min 1.2 V | 9 |
| Enable pin input current IEN | VSHDN = VIN | max 100 nA | 9 |
| Thermal shutdown TSHDN | typ 160 °C | 9 | |
| Hysteresis TSHDN | typ 20 °C | 9 | |
| Output capacitor COUT | Capacitance (see Section 6: Typical performance characteristics) | min 1 · max 22 uF | 9 |

Maka8295/FT2232H-Breakout-board
FT2232H Breakout board with level shifting and selectable io level.

tokla-chiya/VL53L9_KICAD
Open VL53L9.kicadpro in KiCad, then open VL53L9.kicadsch. The schematic is complete; the PCB is still empty and needs placement/routing.
Yes. The symbol is EasyEDA_Cloud:SPX5205M5-L_TR and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.
SOT-23-5L, with 5 pins. Its footprint is drawn on this page.
STMicroelectronics publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C377955, with 68 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the AP2112K-1.8TRG1 by Diodes Incorporated, the ME6211C18M5G-N by MICRONE, the RT9078-18GJ5 by RICHTEK and the TPS7A2018PDBV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.