Skip to the content

LD56100DPU33R

STMicroelectronicsExtended

-40℃~+125℃@(Tj) 1 100uA 13uVrms 155mV@(1A) 1A 3.3V 5.5V 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Soft Start、Enable Positive DFN-8(1.2x1.6) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/LD56100DPU33R
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
DFN-8(1.2x1.6)
Pins
9
In stock
537 at JLCPCB (C2969937)
Used on
1 open-source board

Overview

The LD56100DPU33R is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a DFN-8(1.2x1.6) package with 9 pins. -40℃~+125℃@(Tj) 1 100uA 13uVrms 155mV@(1A) 1A 3.3V 5.5V 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Soft Start、Enable Positive DFN-8(1.2x1.6) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LD56100DPU28R, from EasyEDA) and its footprint (EasyEDA_Cloud:XDFN-8_L1.6-W1.2-P0.40-BL-EP, from EasyEDA), ready for a KiCad board. 537 are in stock at JLCPCB (part C2969937). 1 open-source board in 1 repository on GitHub use it.

Symbol

1VOUT2VOUT3LCON4FB5GND6EN7VIN8VIN9GND
EasyEDA_Cloud:LD56100DPU28RFrom EasyEDA

Footprint

EasyEDA_Cloud:XDFN-8_L1.6-W1.2-P0.40-BL-EPFrom EasyEDA

Pinout

9
The pins of the LD56100DPU33R
PinNameType
1VOUTUnspecified
2VOUTUnspecified
3LCONUnspecified
4FBUnspecified
5GNDUnspecified
6ENUnspecified
7VINUnspecified
8VINUnspecified
9GNDUnspecified

Open-source boards using it

1
  • 2 layers8.3 × 26.3 mmColossus rev C, the printed circuit board in 3D

    Colossus rev C

    henryclaessonVT/darpa-sense-hardware

    27 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LD56100DPU33R?

Yes. The symbol is EasyEDA_Cloud:LD56100DPU28R and the footprint EasyEDA_Cloud:XDFN-8_L1.6-W1.2-P0.40-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LD56100DPU33R?

DFN-8(1.2x1.6), with 9 pins. Its footprint is drawn on this page.

Where is the LD56100DPU33R datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LD56100DPU33R?

JLCPCB lists it as part C2969937, with 537 in stock; the sellers' links on this page open their listings.

What can replace the LD56100DPU33R?

Parts like it in the library: the NCP186AMX330TA by onsemi, the SGM2039A-3.3XXEV8G/TR by SG Micro, the NCP186BMX330TA by onsemi and the SUL6001D8-33 by Suntek. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LD56100DPU33R?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.