Skip to the content
123

LD29080DT50R

STMicroelectronicsExtended

-40℃~+125℃@(Tj) 1 13V 180uVrms 35mA 5V 64dB@(120Hz) 700mV@(800mA) 800mA Fixed Over Current Protection、Over Temperature Protection、Enable Positive DPAK Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/LD29080DT50R
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
DPAK
Pins
3
In stock
0 at JLCPCB (C2971541)
Used on
2 open-source boards

Overview

The LD29080DT50R is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a DPAK package with 3 pins. -40℃~+125℃@(Tj) 1 13V 180uVrms 35mA 5V 64dB@(120Hz) 700mV@(800mA) 800mA Fixed Over Current Protection、Over Temperature Protection、Enable Positive DPAK Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT, from PCBKit's generic symbols) and its footprint (EasyEDA_Cloud:TO-252-2_L6.6-W6.1-P4.57-LS9.9-BR-CW, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C2971541). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1IN3OUT2GND
Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUTFrom PCBKit's generic symbols

Footprint

123
EasyEDA_Cloud:TO-252-2_L6.6-W6.1-P4.57-LS9.9-BR-CWFrom EasyEDA

Pinout

3
The pins of the LD29080DT50R
PinNameType
1INPower in
2GNDPower in
3OUTPower out

Open-source boards using it

2
  • 4 layersRoboRyo, the printed circuit board in 3D

    RoboRyo

    KaitoTLex/RoboRyo

    This is team1280's replacement for the Robo Rio for more redundant and less annoying controls.

    68 parts1MIT
  • 4 layersAETS, the printed circuit board in 3D

    AETS

    MrMicek/AETS

    207 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LD29080DT50R?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT and the footprint EasyEDA_Cloud:TO-252-2_L6.6-W6.1-P4.57-LS9.9-BR-CW, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LD29080DT50R?

DPAK, with 3 pins. Its footprint is drawn on this page.

Where is the LD29080DT50R datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LD29080DT50R?

JLCPCB lists it as part C2971541, with 0 in stock; the sellers' links on this page open their listings.

What can replace the LD29080DT50R?

Parts like it in the library: the 78M05 by UMW, the L7805CDT(UMW) by UMW, the 7805 by YFW and the ICW7805T2G by ICW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LD29080DT50R?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.