Skip to the content
123

LD29080DT33R

STMicroelectronicsExtended

-40℃~+125℃@(Tj) 1 132uVrms 13V 2mA 3.3V 400mV@(800mA) 67dB@(120Hz) 800mA Fixed Over Current Protection、Over Temperature Protection Positive TO-252-2(DPAK) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/LD29080DT33R
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-252-2(DPAK)
Pins
3
In stock
915 at JLCPCB (C155592)
Used on
4 open-source boards

Overview

The LD29080DT33R is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a TO-252-2(DPAK) package with 3 pins. -40℃~+125℃@(Tj) 1 132uVrms 13V 2mA 3.3V 400mV@(800mA) 67dB@(120Hz) 800mA Fixed Over Current Protection、Over Temperature Protection Positive TO-252-2(DPAK) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:TO-252-2, from KiCad's library), ready for a KiCad board. 915 are in stock at JLCPCB (part C155592). 4 open-source boards in 3 repositories on GitHub use it.

Symbol

1IN3OUT2GND
Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUTFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:TO-252-2From KiCad's library

Pinout

3
The pins of the LD29080DT33R
PinNameType
1INPower in
2GNDPower in
3OUTPower out

Open-source boards using it

4
  • 2 layers90.2 × 48.3 mmMOBO SMD, the printed circuit board in 3D

    MOBO SMD

    lkesteloot/alice

    Website documenting a hardware project from the 1990s.

    64 parts79Apache-2.0
  • 4 layersRoboRyo, the printed circuit board in 3D

    RoboRyo

    KaitoTLex/RoboRyo

    This is team1280's replacement for the Robo Rio for more redundant and less annoying controls.

    68 parts1MIT
  • 4 layers67.8 × 18.3 mmUsb stick, the printed circuit board in 3D

    Usb stick

    lkesteloot/alice

    Website documenting a hardware project from the 1990s.

    39 parts79Apache-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LD29080DT33R?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT and the footprint Package_TO_SOT_SMD:TO-252-2, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LD29080DT33R?

TO-252-2(DPAK), with 3 pins. Its footprint is drawn on this page.

Where is the LD29080DT33R datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LD29080DT33R?

JLCPCB lists it as part C155592, with 915 in stock; the sellers' links on this page open their listings.

What can replace the LD29080DT33R?

Parts like it in the library: the AMS1117CD-3.3 by UMW, the UZ1085L-33-TN3-R by UTC, the AMS1086CD-3.3 by Advanced Monolithic Systems and the NCP1117DT33RKG by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LD29080DT33R?

4 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.