Skip to the content
123

LD1086V-DG

STMicroelectronicsExtended

-40℃~+125℃@(Ta) 1 1.5A 1.5V@(1.5A) 1.8V 30V 5mA 60dB@(120Hz) Adjustable Over Current Protection、Over Temperature Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/LD1086V-DG
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-220
Pins
3
In stock
0 at JLCPCB (C2682601)
Used on
3 open-source boards

Overview

The LD1086V-DG is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a TO-220 package with 3 pins. -40℃~+125℃@(Ta) 1 1.5A 1.5V@(1.5A) 1.8V 30V 5mA 60dB@(120Hz) Adjustable Over Current Protection、Over Temperature Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:LD1086V-DG, from KiCad's library) and its footprint (Package_TO_SOT_THT:TO-220-3_Vertical, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2682601). 3 open-source boards in 2 repositories on GitHub use it.

Symbol

1ADJ/GND2OUT3IN
Regulator_Linear:LD1086V-DGFrom KiCad's library

Footprint

123
Package_TO_SOT_THT:TO-220-3_VerticalFrom KiCad's library

Pinout

3
The pins of the LD1086V-DG
PinNameType
1ADJ/GNDInput
2OUTPower out
3INPower in

Open-source boards using it

3
  • 2 layers139.7 × 139.7 mmEPROM programmer, the printed circuit board in 3D

    EPROM programmer

    TheWaffleGuy/EPROM-programmer

    110 parts
  • 2 layers112.7 × 198.2 mmBooster Shield, the printed circuit board in 3D

    Booster Shield

    martinfantini/ModelTrains

    This repo contains all the information regarding to the model trains project

    77 parts
  • 2 layers114.3 × 96.5 mmIOExpander Mega Schild, the printed circuit board in 3D

    IOExpander Mega Schild

    martinfantini/ModelTrains

    This repo contains all the information regarding to the model trains project

    18 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LD1086V-DG?

Yes. The symbol is Regulator_Linear:LD1086V-DG and the footprint Package_TO_SOT_THT:TO-220-3_Vertical, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LD1086V-DG?

TO-220, with 3 pins. Its footprint is drawn on this page.

Where is the LD1086V-DG datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LD1086V-DG?

JLCPCB lists it as part C2682601, with 0 in stock; the sellers' links on this page open their listings.

What can replace the LD1086V-DG?

Parts like it in the library: the MIC39300-1.8BT by Microchip Technology, the MIC39500-1.8BT by Microchip Technology, the MIC39500-1.8WT by Microchip Technology and the LM1086IT-1.8 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LD1086V-DG?

3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.