Skip to the content
123

L78M05CDT-1

STMicroelectronicsExtended

0℃~+150℃@(Tj) 1 20V 2V@(350mA) 4.8V~5.2V 40uV 500mA 62dB@(120Hz) 6mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-251-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/L78M05CDT-1
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-251-3
Pins
3
In stock
0 at JLCPCB (C262914)
Used on
3 open-source boards

Overview

The L78M05CDT-1 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a TO-251-3 package with 3 pins. 0℃~+150℃@(Tj) 1 20V 2V@(350mA) 4.8V~5.2V 40uV 500mA 62dB@(120Hz) 6mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-251-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_THT:TO-251-3_Vertical, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C262914). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1IN3OUT2GND
Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUTFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_THT:TO-251-3_VerticalFrom KiCad's library

Pinout

3
The pins of the L78M05CDT-1
PinNameType
1INPower in
2GNDPower in
3OUTPower out

Open-source boards using it

3
  • 2 layers58.7 × 110.9 mmSCMv3, the printed circuit board in 3D

    SCMv3

    4ms/pcb-SCMv3

    SCM and SCMBO in one module

    121 parts2
  • 2 layers58.5 × 56.9 mmAVR328 COPY, the printed circuit board in 3D

    AVR328 COPY

    VINN17/KRTech

    Dengan memanfaatkan sensor debit dan volume air, sistem ini mampu menghidupkan atau mematikan pompa secara otomatis berdasarkan data real-time, sehingga meningkatkan keamanan dan kenyamanan pengguna jalan.

    33 parts

Questions

Is there a KiCad symbol and footprint for the L78M05CDT-1?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT and the footprint Package_TO_SOT_THT:TO-251-3_Vertical, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the L78M05CDT-1?

TO-251-3, with 3 pins. Its footprint is drawn on this page.

Where is the L78M05CDT-1 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the L78M05CDT-1?

JLCPCB lists it as part C262914, with 0 in stock; the sellers' links on this page open their listings.

Which open-source boards use the L78M05CDT-1?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.