Skip to the content
123

L78L33ACZ

STMicroelectronicsExtended

0℃~+125℃@(Tj) 1 100mA 2V 3.3V 30V 40uV 49dB@(120Hz) 6mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-92-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/L78L33ACZ
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-92-3
Pins
3
In stock
2,995 at JLCPCB (C2927581)
Used on
4 open-source boards

Overview

The L78L33ACZ is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a TO-92-3 package with 3 pins. 0℃~+125℃@(Tj) 1 100mA 2V 3.3V 30V 40uV 49dB@(120Hz) 6mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-92-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1OUT_2GND_3IN, from PCBKit's generic symbols) and its footprint (EasyEDA_Cloud:TO-92-3_L4.9-W3.7-P1.27-L, from EasyEDA), ready for a KiCad board. 2,995 are in stock at JLCPCB (part C2927581). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

IN3OUT1GND2
Pinmap_Generic:Regulator_Linear_1OUT_2GND_3INFrom PCBKit's generic symbols

Footprint

123
EasyEDA_Cloud:TO-92-3_L4.9-W3.7-P1.27-LFrom EasyEDA

Pinout

3
The pins of the L78L33ACZ
PinNameType
1OUTPower out
2GNDPower in
3INPower in

Open-source boards using it

4
  • 2 layers18.8 × 8.1 mmDell charger emulator, the printed circuit board in 3D

    Dell charger emulator

    KivApple/dell-charger-emulator

    Emulator of original Dell charger using ATTINY85

    6 parts154
  • 2 layers100 × 100 mmCuptorul, the printed circuit board in 3D

    Cuptorul

    kelogs/awreflow3

    Andy's Workshop reflow oven (awreflow2)

    59 parts2MIT
  • 4 layers152.9 × 77.2 mmLEC, the printed circuit board in 3D

    LEC

    MSTRocketDesignTeam/Liquid-Engine-Controller

    Evolution of the RDT's Custom Liquid Engine Control Unit!

    71 parts2AGPL-3.0
  • 2 layers45.5 × 33 mmGate controller, the printed circuit board in 3D

    Gate controller

    eranknafo2001/gate_controller

    21 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the L78L33ACZ?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1OUT_2GND_3IN and the footprint EasyEDA_Cloud:TO-92-3_L4.9-W3.7-P1.27-L, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the L78L33ACZ?

TO-92-3, with 3 pins. Its footprint is drawn on this page.

Where is the L78L33ACZ datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the L78L33ACZ?

JLCPCB lists it as part C2927581, with 2,995 in stock; the sellers' links on this page open their listings.

What can replace the L78L33ACZ?

Parts like it in the library: the LM2950-3.3 by HTC Korea TAEJIN Tech, the LM2950G-3.3 by HTC Korea TAEJIN Tech, the HX7333 by HX and the MCP1702-3302E/TO by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the L78L33ACZ?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.