Skip to the content
123

L78L06ABU

STMicroelectronicsExtended

-40℃~+125℃@(Tj) 1 1.7V 100mA 30V 46dB@(120Hz) 50uV 6V 6mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/L78L06ABU
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-89-3
Pins
3
In stock
4,980 at JLCPCB (C81358)
Used on
3 open-source boards

Overview

The L78L06ABU is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a SOT-89-3 package with 3 pins. -40℃~+125℃@(Tj) 1 1.7V 100mA 30V 46dB@(120Hz) 50uV 6V 6mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1OUT_2GND_3IN, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-89-3, from KiCad's library), ready for a KiCad board. 4,980 are in stock at JLCPCB (part C81358). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

3IN1OUT2GND
Pinmap_Generic:Regulator_Linear_1OUT_2GND_3INFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:SOT-89-3From KiCad's library

Pinout

3
The pins of the L78L06ABU
PinNameType
1OUTPower out
2GNDPower in
3INPower in

Open-source boards using it

3
  • 2 layers60.3 × 128.3 mmDAC II, the printed circuit board in 3D

    DAC II

    Blinken-Lights/ASCII

    ASCII Modular hardware and software repo

    155 parts50MIT
  • 2 layers55.9 × 40.6 mmDCRX proto, the printed circuit board in 3D

    DCRX proto

    hmatuschek/ardf-tx

    Schematics and firmware for simple ARDF transmitter.

    45 parts5
  • 2 layers97.7 × 59.7 mmDCR v2, the printed circuit board in 3D

    DCR v2

    drajnauth/DCR

    Direct Conversion Receiver

    45 parts1CC0-1.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the L78L06ABU?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1OUT_2GND_3IN and the footprint Package_TO_SOT_SMD:SOT-89-3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the L78L06ABU?

SOT-89-3, with 3 pins. Its footprint is drawn on this page.

Where is the L78L06ABU datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the L78L06ABU?

JLCPCB lists it as part C81358, with 4,980 in stock; the sellers' links on this page open their listings.

What can replace the L78L06ABU?

Parts like it in the library: the 78L06-150 by UMW, the 78L06MG-AB3-R by UTC, the LM78L06 by KEXIN and the 78N06G-AB3-R by UTC. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the L78L06ABU?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.