L6235PD013
STMicroelectronicsExtended
-40℃~+150℃ 2.8A 5.6A 5mA Three Phase Yes PowerSO-36 Brushless DC (BLDC) Motor Driver ROHS
- Part id
- st/L6235PD013
- Category
- Brushless DC (BLDC) Motor Driver
- Package
- PowerSO-36
- Pins
- 37
- In stock
- 0 at JLCPCB (C1518716)
Overview
The L6235PD013 is a brushless DC (BLDC) Motor Driver made by STMicroelectronics in a PowerSO-36 package with 37 pins. -40℃~+150℃ 2.8A 5.6A 5mA Three Phase Yes PowerSO-36 Brushless DC (BLDC) Motor Driver ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:L6235PD013TR, from EasyEDA) and its footprint (EasyEDA_Cloud:PG-DSO-36_L15.9-W11.0-P0.65-LS14.2-BL-EP, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C1518716).
Symbol
Footprint
Pinout
37| Pin | Name | Type |
|---|---|---|
| 1 | GND | Unspecified |
| 2 | N.C. | Unspecified |
| 3 | N.C | Unspecified |
| 4 | VSA | Unspecified |
| 5 | OUT2 | Unspecified |
| 6 | N.C | Unspecified |
| 7 | VCP | Unspecified |
| 8 | H2 | Unspecified |
| 9 | H3 | Unspecified |
| 10 | H1 | Unspecified |
| 11 | DIAG | Unspecified |
| 12 | SENSEA | Unspecified |
| 13 | RCOFF | Unspecified |
| 14 | N.C. | Unspecified |
| 15 | OUT1 | Unspecified |
| 16 | N.C | Unspecified |
| 17 | N.C. | Unspecified |
| 18 | GND | Unspecified |
| 19 | GND | Unspecified |
| 20 | N.C | Unspecified |
| 21 | N.C | Unspecified |
| 22 | TACHO | Unspecified |
| 23 | N.C. | Unspecified |
| 24 | RCPULSE | Unspecified |
| 25 | SENSEB | Unspecified |
| 26 | FWD/REV | Unspecified |
| 27 | EN | Unspecified |
| 28 | VREF | Unspecified |
| 29 | BRAKE | Unspecified |
| 30 | VBOOT | Unspecified |
| 31 | N.C | Unspecified |
| 32 | OUT3 | Unspecified |
| 33 | VSB | Unspecified |
| 34 | N.C | Unspecified |
| 35 | N.C. | Unspecified |
| 36 | GND | Unspecified |
| 37 | EP | Unspecified |
Parts like it
2
TLE6280GP
DSO-36-40℃~+150℃ 220ns 310ns 6 8V~20V Enable shutdown、Interleaved conduction protection、Dead-time control、Built-in bootstrap diode、Charge pump boost MOSFET Three Phase DSO-36 Gate Drivers ROHSInfineon TechnologiesBrushless DC (BLDC) Motor DriverTLE6280GPNT
DSO-36-12-40℃~+150℃ 250ns 310ns 6 8V~20V Low Side、High Side、Three Phase MOSFET Under Voltage Protection、Short Circuit Protection、Overtemperature protection (OTP) DSO-36-12 Gate Drivers ROHSInfineon TechnologiesBrushless DC (BLDC) Motor Driver
Questions
Is there a KiCad symbol and footprint for the L6235PD013?
Yes. The symbol is EasyEDA_Cloud:L6235PD013TR and the footprint EasyEDA_Cloud:PG-DSO-36_L15.9-W11.0-P0.65-LS14.2-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the L6235PD013?
PowerSO-36, with 37 pins. Its footprint is drawn on this page.
Where is the L6235PD013 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the L6235PD013?
JLCPCB lists it as part C1518716, with 0 in stock; the sellers' links on this page open their listings.
What can replace the L6235PD013?
Parts like it in the library: the TLE6280GP by Infineon Technologies and the TLE6280GPNT by Infineon Technologies. Check their datasheets: a part that fits the footprint may still differ in its ratings.