4 layers100 × 85 mm
TQFN-32
ISO8200AQ
STMicroelectronicsExtended
-40℃~+125℃ 10.5V~45V 120mΩ 700mA 8 Active Low High Side Switch 过压保护、欠压锁定、Overcurrent Protection、Over temperature protection、Short-Circuit Protection TQFN-32 Power Distribution Switches ROHS
- Part id
- st/ISO8200AQ
- Category
- Power Distribution Switches
- Package
- TQFN-32
- Pins
- 36
- In stock
- 0 at JLCPCB (C2965258)
- Used on
- 1 open-source board
Overview
The ISO8200AQ is a power Distribution Switche made by STMicroelectronics in a TQFN-32 package with 34 pins. -40℃~+125℃ 10.5V~45V 120mΩ 700mA 8 Active Low High Side Switch 过压保护、欠压锁定、Overcurrent Protection、Over temperature protection、Short-Circuit Protection TQFN-32 Power Distribution Switches ROHS.
PCBKit's library has its KiCad symbol (tinkerforge:ISO8200AQ, from Tinkerforge), ready for a KiCad board. JLCPCB lists it (part C2965258). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
The library has no footprint for this part yet.
Pinout
34| Pin | Name | Type |
|---|---|---|
| 1 | GNDdd | Passive |
| 2 | NC | Not connected |
| 3 | GNDcc | Passive |
| 4 | OUT8 | Passive |
| 5 | OUT8 | Passive |
| 6 | OUT7 | Passive |
| 7 | OUT7 | Passive |
| 8 | OUT6 | Passive |
| 9 | OUT6 | Passive |
| 10 | OUT5 | Passive |
| 11 | OUT5 | Passive |
| 12 | OUT4 | Passive |
| 13 | OUT4 | Passive |
| 14 | OUT3 | Passive |
| 15 | OUT3 | Passive |
| 16 | OUT2 | Passive |
| 17 | OUT2 | Passive |
| 18 | OUT1 | Passive |
| 19 | OUT1 | Passive |
| 20 | VDD | Passive |
| 21 | OUT_EN | Passive |
| 22 | SS | Passive |
| 23 | CLK | Passive |
| 24 | SDI | Passive |
| 25 | PGOOD | Passive |
| 26 | NC | Not connected |
| 27 | NC | Not connected |
| 28 | NC | Not connected |
| 29 | NC | Not connected |
| 30 | NC | Not connected |
| 31 | SDO | Passive |
| 32 | FAULT | Passive |
| TGND | GNDcc | Passive |
| TVCC | VCC | Passive |
Open-source boards using it
1Questions
Is there a KiCad symbol and footprint for the ISO8200AQ?
Yes. The symbol is tinkerforge:ISO8200AQ, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ISO8200AQ?
TQFN-32, with 34 pins.
Where can I order the ISO8200AQ?
JLCPCB lists it as part C2965258, with 0 in stock; the sellers' links on this page open their listings.
Which open-source boards use the ISO8200AQ?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.