4 layers60 × 90 mm
Drone FCC
Federiconunezfrau/FCC-project-LARoptero
This repository contains the hardware for the Flight Control Computer of the LARoptero project
180 parts
Overview
The ILPS22QSTR is a pressure Sensor made by STMicroelectronics in a HLGA-10(2x2) package with 10 pins. -40℃~+105℃ 0.45pa/K 1.5pa 1.7V~3.6V 26Kpa~4.06bar 3.6uA 50pa I2C、SPI、I3C HLGA-10(2x2) Pressure Sensors ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ILPS22QSTR, from EasyEDA) and its footprint (EasyEDA_Cloud:LGA-10_L2.0-W2.0-P0.50-TL_BMP581, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C3253713). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
Parameters
10- Absolute Accuracy
- 50pa
- Features
- Integrated ADC and digital interface；On-chip temperature compensation；On-chip calibration and non-volatile storage；On-chip temperature output；Integrated signal amplifier
- Interface
- SPI；I2C
- Module
- Yes
- Operating Temperature
- -40℃~+105℃
- Pressure range
- 26Kpa~4.06bar
- Relative Accuracy
- 1.5pa
- Standby Current
- 3.6uA
- Temperature Coefficient of Offset(TCO)
- 0.45pa/K
- Voltage - Supply
- 1.7V~3.6V
Order codes
1- ILPS22QSTRLCSC C3253713
Pinout
10| Pin | Name | Type |
|---|---|---|
| 1 | Vdd_IO | Unspecified |
| 2 | SCL/SPC | Unspecified |
| 3 | RES | Unspecified |
| 4 | SDA/SDI/SDO | Unspecified |
| 5 | AH2/QVAR2 | Unspecified |
| 6 | CS | Unspecified |
| 7 | AH1/QVAR1 | Unspecified |
| 8 | GND_IO | Unspecified |
| 9 | GND | Unspecified |
| 10 | VDD | Unspecified |
Open-source boards using it
All 1Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/st/ILPS22QSTR" title="ILPS22QSTR in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/st/ILPS22QSTR.jpg" alt="ILPS22QSTR" width="1200" height="900">[](https://pcbkit.io/parts/st/ILPS22QSTR)Questions
Is there a KiCad symbol and footprint for the ILPS22QSTR?
Yes. The symbol is EasyEDA_Cloud:ILPS22QSTR and the footprint EasyEDA_Cloud:LGA-10_L2.0-W2.0-P0.50-TL_BMP581, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ILPS22QSTR?
HLGA-10(2x2), with 10 pins. Its footprint is drawn on this page.
Where is the ILPS22QSTR datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the ILPS22QSTR?
JLCPCB lists it as part C3253713, with 0 in stock; the sellers' links on this page open their listings.
What can replace the ILPS22QSTR?
Parts like it in the library: the BM1386GLV-ZTR by ROHM Semiconductor. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the ILPS22QSTR?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.
