Skip to the content
25

IIS328DQ

STMicroelectronicsExtended

-40℃~+105℃ 16bit 1uA 2.16V~3.6V Accelerometer SPI、I2C X,Y,Z ±8g 运动事件检测 QFN-24(4x4) Accelerometers ROHS

Part id
st/IIS328DQ
Category
Accelerometers
Package
QFN-24(4x4)
Pins
25
In stock
0 at JLCPCB (C2970137)
Used on
3 open-source boards

Overview

The IIS328DQ is an accelerometer made by STMicroelectronics in a QFN-24(4x4) package with 25 pins. -40℃~+105℃ 16bit 1uA 2.16V~3.6V Accelerometer SPI、I2C X,Y,Z ±8g 运动事件检测 QFN-24(4x4) Accelerometers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:IIS328DQTR, from EasyEDA) and its footprint (EasyEDA_Cloud:QFN-24_L4.0-W4.0-P0.50-TL-EP2.3, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C2970137). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1NC2NC3INT_24Reserved5VDD6GND7INT_18GND9GND10GND11SPC/SCL12CS13Reserved14VDD_IO15SDO/SA016SDI/SDO/SDA17NC18NC19NC20NC21NC22NC23NC24NC25EP
EasyEDA_Cloud:IIS328DQTRFrom EasyEDA

Footprint

25
EasyEDA_Cloud:QFN-24_L4.0-W4.0-P0.50-TL-EP2.3From EasyEDA

Pinout

25
The pins of the IIS328DQ
PinNameType
1NCUnspecified
2NCUnspecified
3INT_2Unspecified
4ReservedUnspecified
5VDDUnspecified
6GNDUnspecified
7INT_1Unspecified
8GNDUnspecified
9GNDUnspecified
10GNDUnspecified
11SPC/SCLUnspecified
12CSUnspecified
13ReservedUnspecified
14VDD_IOUnspecified
15SDO/SA0Unspecified
16SDI/SDO/SDAUnspecified
17NCUnspecified
18NCUnspecified
19NCUnspecified
20NCUnspecified
21NCUnspecified
22NCUnspecified
23NCUnspecified
24NCUnspecified
25EPUnspecified

Open-source boards using it

3
  • 4 layers130 × 74.7 mmStima V4 Slave R1 1, the printed circuit board in 3D

    Stima V4 Slave R1 1

    r-map/rmap

    rete monitoraggio ambientale partecipativo documentation at https://doc.rmap.cc

    289 parts55
  • 4 layers60 × 60 mmBLDC, the printed circuit board in 3D

    BLDC

    BetzDrive/bldc-controller-hardware

    Hardware design files for BLDC servo controller

    124 parts14
  • 4 layersBetz mini, the printed circuit board in 3D

    Betz mini

    codebot/betz_experimental

    experimental firmware for betz drive

    78 partsApache-2.0

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the IIS328DQ?

Yes. The symbol is EasyEDA_Cloud:IIS328DQTR and the footprint EasyEDA_Cloud:QFN-24_L4.0-W4.0-P0.50-TL-EP2.3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the IIS328DQ?

QFN-24(4x4), with 25 pins. Its footprint is drawn on this page.

Where is the IIS328DQ datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the IIS328DQ?

JLCPCB lists it as part C2970137, with 0 in stock; the sellers' links on this page open their listings.

What can replace the IIS328DQ?

Parts like it in the library: the AIS3624DQTR by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the IIS328DQ?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.