Skip to the content
123456

DCP3601NMR

STMicroelectronicsExtended

-40℃~+150℃ 1 1.4mA 1A 3.3V~36V 800kHz~1.2MHz Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Output discharge、Cycle-by-cycle current limiting、EMI optimization (spread spectrum) Step-down type Yes SOT-23-6L DC-DC Converters ROHS

Part id
st/DCP3601NMR
Category
DC DC Converters
Package
SOT-23-6L
Pins
6
In stock
192 at JLCPCB (C31882414)
Used on
2 open-source boards

Overview

The DCP3601NMR is a DC DC Converter made by STMicroelectronics in a SOT-23-6L package with 6 pins. -40℃~+150℃ 1 1.4mA 1A 3.3V~36V 800kHz~1.2MHz Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Output discharge、Cycle-by-cycle current limiting、EMI optimization (spread spectrum) Step-down type Yes SOT-23-6L DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LV2842XLVDDCR-JSM, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 192 are in stock at JLCPCB (part C31882414). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1BOOT2GND3FB4EN5VIN6SW
EasyEDA_Cloud:LV2842XLVDDCR-JSMFrom EasyEDA

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

Pinout

6
The pins of the DCP3601NMR
PinNameType
1BOOTUnspecified
2GNDUnspecified
3FBUnspecified
4ENUnspecified
5VINUnspecified
6SWUnspecified

Open-source boards using it

2
  • 4 layers70 × 70 mmTank, the printed circuit board in 3D

    Tank

    frangipp/TANK-PCB

    Projet étudiant réalisé en binôme à l’ESEO Angers, ce TANK est un robot mobile à entraînement différentiel, piloté en Bluetooth via une application Android.

    163 parts
  • 4 layers56.5 × 216 mmE003 rocker, the printed circuit board in 3D

    E003 rocker

    oscar-wik/e002_rocker

    226 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the DCP3601NMR?

Yes. The symbol is EasyEDA_Cloud:LV2842XLVDDCR-JSM and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DCP3601NMR?

SOT-23-6L, with 6 pins. Its footprint is drawn on this page.

Where is the DCP3601NMR datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the DCP3601NMR?

JLCPCB lists it as part C31882414, with 192 in stock; the sellers' links on this page open their listings.

What can replace the DCP3601NMR?

Parts like it in the library: the MT3608 by 西安航天民芯, the ETA1039S2G by etasolution, the RY9121E by RYCHIP Semiconductor Inc. and the TMI3255S by TMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DCP3601NMR?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.