Skip to the content
123

IRFR5305

SlkorExtended

Part id
slkor/IRFR5305
Category
MOSFETs
Package
TO-252
Pins
3
In stock
3,102 at JLCPCB (C5155388)
Used on
13 open-source boards

Overview

The IRFR5305 is a MOSFET made by Slkor in a TO-252 package with 3 pins.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:AOB411L, from EasyEDA) and its footprint (EasyEDA_Cloud:TO-252-3_L6.6-W6.1-P4.58-LS10.1-BR-1, from EasyEDA), ready for a KiCad board. 3,102 are in stock at JLCPCB (part C5155388). 13 open-source boards in 7 repositories on GitHub use it.

Symbol

3S1G2D
EasyEDA_Cloud:AOB411LFrom EasyEDA

Footprint

123
EasyEDA_Cloud:TO-252-3_L6.6-W6.1-P4.58-LS10.1-BR-1From EasyEDA

Pinout

3
The pins of the IRFR5305
PinNameType
1GUnspecified
2DUnspecified
3SUnspecified

Open-source boards using it

13See all 13
  • 4 layers45 × 89 mmFlight controller v2, the printed circuit board in 3D

    Flight controller v2

    Eryk-Mozdzen/uav-tvc-goose

    Single rotor, thrust vector controlled UAV

    115 parts9
  • 2 layers161.6 × 95.2 mmErsaswitch, the printed circuit board in 3D

    Ersaswitch

    hb020/ersaswitch

    Make a Ersa i-con 1V soldering station work with 2 tools, without re-plugging

    80 parts1
  • 2 layers75 × 65 mmMotormodul, the printed circuit board in 3D

    Motormodul

    Meo98/picostack

    Stackable, contract-driven module system for the Raspberry Pi Pico — open hardware, built by code

    63 partsGPL-3.0
  • 2 layers55 × 45 mmStmesc, the printed circuit board in 3D

    Stmesc

    neilgibsonpinto-art/Brushed-esc

    Powered by a 240 MHz dual-core ESP32, the STMESC features Tri-Mode Hybrid Control (Bluetooth LE, Wi-Fi, and standard hobby RC), onboard reverse polarity protection, real-time current sensing with stall detection, and an…

    57 partsMIT
  • 4 layers203.5 × 90 mmBDCMotorController, the printed circuit board in 3D

    BDCMotorController

    nunosousa/TelescopeMirrorTester

    This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors

    323 partsMIT
  • 2 layers202 × 85 mmInstru bab v2 full, the printed circuit board in 3D

    Instru bab v2 full

    trublion/Boite_a_bourdon_control_board

    HW control board for motorised hurgy-gurdy. Controls a DC motor with a half-H-bridge, reads an analog audio signal envelope, dual-PCB design.

    147 partsMIT
  • 2 layers43.9 × 28.8 mmC64Saver2, the printed circuit board in 3D

    C64Saver2

    bwack/C64-Saver-bwack

    C64 Saver v1 and v2 - Overvoltage protection for the C64 and its power brick.

    35 parts124
  • 2 layers43.9 × 28.8 mmC64Saver2, the printed circuit board in 3D

    C64Saver2

    bwack/C64-Saver-bwack

    C64 Saver v1 and v2 - Overvoltage protection for the C64 and its power brick.

    26 parts124

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the IRFR5305?

Yes. The symbol is EasyEDA_Cloud:AOB411L and the footprint EasyEDA_Cloud:TO-252-3_L6.6-W6.1-P4.58-LS10.1-BR-1, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the IRFR5305?

TO-252, with 3 pins. Its footprint is drawn on this page.

Where is the IRFR5305 datasheet?

Slkor publishes it: the Datasheet link on this page opens it.

Where can I order the IRFR5305?

JLCPCB lists it as part C5155388, with 3,102 in stock; the sellers' links on this page open their listings.

What can replace the IRFR5305?

Parts like it in the library: the APG095N01K by ALLPOWER, the HYG120P06LR1D by HUAYI, the 50N06 by KUU and the IPD90N06S404ATMA2 by Infineon Technologies. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the IRFR5305?

13 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.