Skip to the content
123456

AS179-92LF

Skyworks SolutionsExtended

-40℃~+85℃ 0.4dB 20MHz~4GHz 23dB 30dBm 3V SPDT SC-70-6(SOT-363) RF Switches ROHS

Part id
skyworks/AS179-92LF
Category
RF Switches
Package
SC-70-6(SOT-363)
Pins
6
In stock
1,697 at JLCPCB (C83422)
Used on
14 open-source boards

Overview

The AS179-92LF is a RF Switche made by Skyworks Solutions in a SC-70-6(SOT-363) package with 6 pins. -40℃~+85℃ 0.4dB 20MHz~4GHz 23dB 30dBm 3V SPDT SC-70-6(SOT-363) RF Switches ROHS.

PCBKit's library has its KiCad symbol (RF_Switch:AS179-92LF, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-363_SC-70-6, from KiCad's library), ready for a KiCad board. 1,697 are in stock at JLCPCB (part C83422). 14 open-source boards in 12 repositories on GitHub use it.

Symbol

1J32GND3J24V15J16V2
RF_Switch:AS179-92LFFrom KiCad's library

Footprint

123456
Package_TO_SOT_SMD:SOT-363_SC-70-6From KiCad's library

Pinout

6
The pins of the AS179-92LF
PinNameType
1J3Passive
2GNDPower in
3J2Passive
4V1Input
5J1Passive
6V2Input

Open-source boards using it

14See all 14
  • 2 layers118.5 × 94.5 mmWaveLab24GHz, the printed circuit board in 3D

    WaveLab24GHz

    PA0MHE/Wavelab-24G-Addon-module

    Can be used as addon module for the Wavelab 23X1008XP module, which was available during the 2021-2022 timeframe on www.ebay.pl seller:bisonelectronics-sp2jyr The module converts the first-IF 2364MHz to 432MHz (or…

    207 parts5MIT
  • 6 layers57 × 25.9 mmR7FS7MOD, the printed circuit board in 3D

    R7FS7MOD

    Brazil-L/Lumeward-OpenSource

    Open-source Lumeward firmware and development tools

    228 parts2Apache-2.0
  • 2 layersLCP Controller, the printed circuit board in 3D

    LCP Controller

    NOAA-PMEL/EDD-LCP_Control

    Control PCB & Firmware for Low Cost Profiler

    251 parts1MIT
  • 4 layers250 × 160.1 mmSimdir, the printed circuit board in 3D

    Simdir

    rdos314/radio-zcu208

    Radio analysator based on ZCU208 evaluation board

    322 parts1
  • 2 layers88.9 × 82.6 mmStm32 radio, the printed circuit board in 3D

    Stm32 radio

    Andruida/stm32_radio_szakdolgozat

    56 parts
  • 2 layers88.9 × 71.1 mmSTM SDR, the printed circuit board in 3D

    STM SDR

    Beacroxx/STM-SDR

    A portable FM radio receiver with OLED display, built on STM32F411CEU6 microcontroller with SI4732-A10 software-defined radio chip.

    64 partsGPL-3.0
  • 2 layers102 × 76.5 mmTeensy sdr, the printed circuit board in 3D

    Teensy sdr

    electron271/teensy-sdr

    63 parts
  • 2 layers61.9 × 53.6 mmFox attenuator digital ic, the printed circuit board in 3D

    Fox attenuator digital ic

    sq5md/fox-attenuator

    Projekt powstał jako potrzeba klubowa SP5YAM z Komorowa.

    37 partsGPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the AS179-92LF?

Yes. The symbol is RF_Switch:AS179-92LF and the footprint Package_TO_SOT_SMD:SOT-363_SC-70-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AS179-92LF?

SC-70-6(SOT-363), with 6 pins. Its footprint is drawn on this page.

Where is the AS179-92LF datasheet?

Skyworks Solutions publishes it: the Datasheet link on this page opens it.

Where can I order the AS179-92LF?

JLCPCB lists it as part C83422, with 1,697 in stock; the sellers' links on this page open their listings.

What can replace the AS179-92LF?

Parts like it in the library: the HX179-92-ST by ZHHXDZ, the XA214-G4C by XINLUDA, the XA2179-S13 by XINLUDA and the XA17-G4K by XINLUDA. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AS179-92LF?

14 boards in 12 repositories on GitHub; the most starred are listed on this page, with their KiCad files.