Skip to the content
9

SIT3051TK

SITExtended

-40℃~+125℃ 1 15uA 1Mbps 3V~3.6V 70mA CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Short-Circuit Protection、Hot-swap protection DFN-8-EP(3x3) CAN Transceivers ROHS

Part id
sit/SIT3051TK
Category
CAN Transceivers
Package
DFN-8-EP(3x3)
Pins
8
In stock
8,146 at JLCPCB (C601078)
Used on
3 open-source boards

Overview

The SIT3051TK is a CAN Transceiver made by SIT in a DFN-8-EP(3x3) package with 9 pins. -40℃~+125℃ 1 15uA 1Mbps 3V~3.6V 70mA CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Short-Circuit Protection、Hot-swap protection DFN-8-EP(3x3) CAN Transceivers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:SIT3051TK, from EasyEDA) and its footprint (EasyEDA_Cloud:DFN-8_L3.0-W3.0-P0.65-BL-EP, from EasyEDA), ready for a KiCad board. 8,146 are in stock at JLCPCB (part C601078). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1D2GND3VCC4R5SHDN6CANL7CANH8RS9EP
EasyEDA_Cloud:SIT3051TKFrom EasyEDA

Footprint

9
EasyEDA_Cloud:DFN-8_L3.0-W3.0-P0.65-BL-EPFrom EasyEDA

Pinout

9
The pins of the SIT3051TK
PinNameType
1DUnspecified
2GNDUnspecified
3VCCUnspecified
4RUnspecified
5SHDNUnspecified
6CANLUnspecified
7CANHUnspecified
8RSUnspecified
9EPUnspecified

Open-source boards using it

3
  • 6 layers34.4 × 20 mmGigaControl, the printed circuit board in 3D

    GigaControl

    kaminaris/GigaESC-ControlBoard

    Compact six-layer control card for modular GigaESC motor controllers. The MCU, CAN transceiver, IMU and signal conditioning live here; the MOSFET power stage and power supply are separate boards.

    54 parts
  • 2 layers70 × 70 mmSensactUp4, the printed circuit board in 3D

    SensactUp4

    klaus-liebler/sensact

    Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…

    147 parts4Apache-2.0
  • 2 layers58 × 60 mmBldc, the printed circuit board in 3D

    Bldc

    klaus-liebler/esp32-bldc-controller

    118 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SIT3051TK?

Yes. The symbol is EasyEDA_Cloud:SIT3051TK and the footprint EasyEDA_Cloud:DFN-8_L3.0-W3.0-P0.65-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SIT3051TK?

DFN-8-EP(3x3), with 9 pins. Its footprint is drawn on this page.

Where is the SIT3051TK datasheet?

SIT publishes it: the Datasheet link on this page opens it.

Where can I order the SIT3051TK?

JLCPCB lists it as part C601078, with 8,146 in stock; the sellers' links on this page open their listings.

What can replace the SIT3051TK?

Parts like it in the library: the TLE9251VLE by Infineon Technologies, the MCP2561-E/MF by Microchip Technology, the NCV7342MW3 by onsemi and the MCP2542WFD-E/MF by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SIT3051TK?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.