ST78C36CQ64
SIPEXExtended
16Byte 4 5V Internal Oscillator、Counter、Software configurable port mode、16-byte FIFO for ECP mode、On-chip oscillator、Software selectable interrupt and 8-bit DMA channel PLCC-64 UART ROHS
- Part id
- sipex/ST78C36CQ64
- Category
- UART
- Package
- PLCC-64
- Pins
- 64
- In stock
- 0 at JLCPCB (C3312970)
Overview
The ST78C36CQ64 is an UART made by SIPEX in a PLCC-64 package with 64 pins. 16Byte 4 5V Internal Oscillator、Counter、Software configurable port mode、16-byte FIFO for ECP mode、On-chip oscillator、Software selectable interrupt and 8-bit DMA channel PLCC-64 UART ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ST78C36CQ64, from EasyEDA) and its footprint (EasyEDA_Cloud:LQFP-64_L10.0-W10.0-P0.50-LS12.0-BL, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C3312970).
Symbol
Footprint
Pinout
64| Pin | Name | Type |
|---|---|---|
| 1 | N.C. | Unspecified |
| 2 | -DACK2 | Unspecified |
| 3 | DRQ3 | Unspecified |
| 4 | -DACK3 | Unspecified |
| 5 | D7 | Unspecified |
| 6 | D6 | Unspecified |
| 7 | D5 | Unspecified |
| 8 | D4 | Unspecified |
| 9 | D3 | Unspecified |
| 10 | D2 | Unspecified |
| 11 | D1 | Unspecified |
| 12 | D0 | Unspecified |
| 13 | AEN | Unspecified |
| 14 | -IRQ9 | Unspecified |
| 15 | GND | Unspecified |
| 16 | VCC | Unspecified |
| 17 | N.C. | Unspecified |
| 18 | -IRQ5 | Unspecified |
| 19 | IOCHRDY | Unspecified |
| 20 | -IRQ7 | Unspecified |
| 21 | XTAL1 | Unspecified |
| 22 | XTAL2 | Unspecified |
| 23 | PDIR | Unspecified |
| 24 | -CS | Unspecified |
| 25 | GND | Unspecified |
| 26 | RESET | Unspecified |
| 27 | -STROBE | Unspecified |
| 28 | -AUTOFDX | Unspecified |
| 29 | INIT | Unspecified |
| 30 | -SLCTIN | Unspecified |
| 31 | N.C. | Unspecified |
| 32 | N.C. | Unspecified |
| 33 | N.C. | Unspecified |
| 34 | N.C. | Unspecified |
| 35 | N.C. | Unspecified |
| 36 | A10 | Unspecified |
| 37 | GND | Unspecified |
| 38 | PD0 | Unspecified |
| 39 | PD1 | Unspecified |
| 40 | PD2 | Unspecified |
| 41 | PD3 | Unspecified |
| 42 | PD4 | Unspecified |
| 43 | PD5 | Unspecified |
| 44 | PD6 | Unspecified |
| 45 | PD7 | Unspecified |
| 46 | A2 | Unspecified |
| 47 | -DACK1 | Unspecified |
| 48 | GND | Unspecified |
| 49 | N.C. | Unspecified |
| 50 | N.C. | Unspecified |
| 51 | DRQ1 | Unspecified |
| 52 | A0 | Unspecified |
| 53 | A1 | Unspecified |
| 54 | -IOW | Unspecified |
| 55 | -IOR | Unspecified |
| 56 | VCC | Unspecified |
| 57 | -ERROR | Unspecified |
| 58 | SLCT | Unspecified |
| 59 | BUSY | Unspecified |
| 60 | -ACK | Unspecified |
| 61 | PE | Unspecified |
| 62 | TC | Unspecified |
| 63 | DRQ2 | Unspecified |
| 64 | GND | Unspecified |
Parts like it
5Questions
Is there a KiCad symbol and footprint for the ST78C36CQ64?
Yes. The symbol is EasyEDA_Cloud:ST78C36CQ64 and the footprint EasyEDA_Cloud:LQFP-64_L10.0-W10.0-P0.50-LS12.0-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ST78C36CQ64?
PLCC-64, with 64 pins. Its footprint is drawn on this page.
Where is the ST78C36CQ64 datasheet?
SIPEX publishes it: the Datasheet link on this page opens it.
Where can I order the ST78C36CQ64?
JLCPCB lists it as part C3312970, with 0 in stock; the sellers' links on this page open their listings.
What can replace the ST78C36CQ64?
Parts like it in the library: the XR16C854DCV by SIPEX, the XR16C854IV by SIPEX, the XR16V564DIV by SIPEX and the XR16V564IV by SIPEX. Check their datasheets: a part that fits the footprint may still differ in its ratings.