Skip to the content
12345678

SI570

Silicon LabsExtended

SMD-8P New Arrivals ROHS

Part id
silabs/SI570
Category
Uncategorised
Package
SMD-8P
Pins
8
In stock
0 at JLCPCB (C7587948)
Used on
8 open-source boards

Overview

The SI570 is an uncategorised made by Silicon Labs in a SMD-8P package with 8 pins. SMD-8P New Arrivals ROHS.

PCBKit's library has its KiCad symbol (Oscillator:Si570, from KiCad's library) and its footprint (Oscillator:Oscillator_SMD_SI570_SI571_Standard, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C7587948). 8 open-source boards in 7 repositories on GitHub use it.

Symbol

OE2GND3CLK+4CLK-5Vcc6SDA7SCL8
Oscillator:Si570From KiCad's library

Footprint

12345678
Oscillator:Oscillator_SMD_SI570_SI571_StandardFrom KiCad's library

Pinout

8
The pins of the SI570
PinNameType
1NCNot connected
2OEInput
3GNDPower in
4CLK+Output
5CLK-Output
6VccPower in
7SDAInput/output
8SCLInput

Open-source boards using it

8
  • 2 layers100 × 80 mmDeltaSDR, the printed circuit board in 3D

    DeltaSDR

    cernohorsky/DeltaSDR

    HF Software Defined Radio Transceiver that includes ADC and DAC circuits. No soundcard is needed. Board communicates only trough one USB cable.

    180 parts9
  • 2 layers100 × 95 mmLCSDR, the printed circuit board in 3D

    LCSDR

    arsenal007/PCM2900C_SI570_PCB

    Processor PCB based on PCM2900C and Si570. SDR

    92 parts1
  • 20 layers228.6 × 304.8 mmBpm dfe, the printed circuit board in 3D

    Bpm dfe

    jamead/rfsocdfe-hw

    rfsoc DFE carrier board Kicad files

    930 parts1
  • 14 layers205.6 × 228.6 mmAcmi2-fpga, the printed circuit board in 3D

    Acmi2-fpga

    jamead/acmi2-hw-fpgabrd

    ACMI-2 KiCad files for the FPGA Board

    406 parts
  • 4 layers50 × 56 mmRadar synth, the printed circuit board in 3D

    Radar synth

    sigma0us/radar-synth

    Dual PLL radar transmitter, design for prototyping

    87 parts
  • 2 layers100 × 80 mmPokus, the printed circuit board in 3D

    Pokus

    cernohorsky/DeltaSDR

    HF Software Defined Radio Transceiver that includes ADC and DAC circuits. No soundcard is needed. Board communicates only trough one USB cable.

    148 parts9
  • 2 layersVhf uhf IQ Modulator V3, the printed circuit board in 3D

    Vhf uhf IQ Modulator V3

    antonjan/IQ_Modulator

    IQ Modulator for 2M and 70cm from I2C and ALSA PCM Audio on Orange PI Zero (Estimated TX Power 500mW)

    72 parts7GPL-3.0
  • 2 layers40 × 20.3 mmSi570 pmod, the printed circuit board in 3D

    Si570 pmod

    michael-betz/zed_vvm

    RF vector volt-meter: Zedboard, DC1525A daughter board, litex, debian

    17 parts4

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the SI570?

Yes. The symbol is Oscillator:Si570 and the footprint Oscillator:Oscillator_SMD_SI570_SI571_Standard, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SI570?

SMD-8P, with 8 pins. Its footprint is drawn on this page.

Where can I order the SI570?

JLCPCB lists it as part C7587948, with 0 in stock; the sellers' links on this page open their listings.

What can replace the SI570?

Parts like it in the library: the SI571AJC000337DG by Silicon Labs. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SI570?

8 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.