Skip to the content
PCBKitNew board
插件,D2.5xL9mm

H18

SETsafe | SETfuse

Extended
DatasheetJLCPCBLCSCsetsafe-setfuse/H18
Category
Thermal Fuses (TCO)
Package
插件,D2.5xL9mm
Pins
2

Overview

The H18 is a thermal Fuse made by SETsafe | SETfuse in a 插件,D2.5xL9mm package with 2 pins.

PCBKit's library has its KiCad symbol (Device:Fuse, from KiCad's library), ready for a KiCad board. 225 are in stock at JLCPCB (part C3032524). 1 open-source board in 1 repository on GitHub use it.

Symbol

Device:FuseFrom KiCad's library

Footprint

The library has no footprint for this part yet.

Parameters

8
Current Rating
2A
Diameter (φD)
2.5mm
Holding Temperature
61℃
Maximum Temperature Limit
200℃
Operating Temperature
81℃
Rated Functioning Temperature
86℃
Type
Axial
Voltage Rating
250V

Order codes

1

Pinout

2
The pins of the H18
PinNameType
1—Passive
2—Passive

Open-source boards using it

All 1
  • 2 layers81 × 111 mmStrain, the printed circuit board in 3D

    Strain

    lennartquerter/euro-rack-synth

    Lenimal Github for DIY for a Eurorack Synth

    37 parts13

Questions

Is there a KiCad symbol and footprint for the H18?

Yes. The symbol is Device:Fuse, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the H18?

插件,D2.5xL9mm, with 2 pins.

Where is the H18 datasheet?

SETsafe | SETfuse publishes it: the Datasheet link on this page opens it.

Where can I order the H18?

JLCPCB lists it as part C3032524, with 225 in stock; the sellers' links on this page open their listings.

What can replace the H18?

Parts like it in the library: the B6 by SETsafe | SETfuse, the B0 by SETsafe | SETfuse, the H2 by SETsafe | SETfuse and the H4 by SETsafe | SETfuse. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the H18?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8