
Board To Be Tested
Ironman-007/PCBPT
This is a system that can help directly connect the schematic of the PCB design with test equipment (oscilloscope. etc,).
SensirionExtended
Factory calibration、Built-in heater、Derived quantity calculation SMD Temperature and Humidity Sensor ROHS
The SHT15 is an uncategorised made by Sensirion in a SMD package with 8 pins. Factory calibration、Built-in heater、Derived quantity calculation SMD Temperature and Humidity Sensor ROHS.
PCBKit's library has its KiCad symbol (dk_Humidity-Moisture-Sensors:SHT15_Obsolete, from Digikey) and its footprint (Source_Footprints:Humidity_SHT15, from Digikey), ready for a KiCad board. JLCPCB lists it (part C85370). 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | GND | Power in |
| 2 | DATA | Input/output |
| 3 | SCK | Input |
| 4 | VDD | Power in |
| 5 | NC | Not connected |
| 6 | NC | Not connected |
| 7 | NC | Not connected |
| 8 | NC | Not connected |

Ironman-007/PCBPT
This is a system that can help directly connect the schematic of the PCB design with test equipment (oscilloscope. etc,).
Yes. The symbol is dk_Humidity-Moisture-Sensors:SHT15_Obsolete and the footprint Source_Footprints:Humidity_SHT15, both drawn on this page. PCBKit places them on a board for you when you design with it.
SMD, with 8 pins. Its footprint is drawn on this page.
Sensirion publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C85370, with 0 in stock; the sellers' links on this page open their listings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.