Skip to the content
PCBKitNew board
SOIC-8-EP

SC4215ASTRT

SEMTECH

-40℃~+105℃@(Ta) 1 2A 500mV~3.8V、500mV、1.2V 600mV@(2A) 6V Fixed、Adjustable Over Current Protection、Over Temperature Protection、Enable Positive SOIC-8-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Extended
DatasheetJLCPCBLCSCsemtech/SC4215ASTRT
Category
Voltage Regulators Linear, Low Drop Out (LDO) Regulators
Package
SOIC-8-EP
Pins
9

Overview

The SC4215ASTRT is a voltage Regulators Linear, Low Drop Out (LDO) Regulator made by SEMTECH in a SOIC-8-EP package with 9 pins. -40℃~+105℃@(Ta) 1 2A 500mV~3.8V、500mV、1.2V 600mV@(2A) 6V Fixed、Adjustable Over Current Protection、Over Temperature Protection、Enable Positive SOIC-8-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:SC4216HSETRT, from EasyEDA), ready for a KiCad board. 448 are in stock at JLCPCB (part C353859). 8 open-source boards in 8 repositories on GitHub use it.

Symbol

NC1EN2VIN3NC4NC5VO6FB7GND8EP9
EasyEDA_Cloud:SC4216HSETRTFrom EasyEDA

Footprint

The library has no footprint for this part yet.

Parameters

9
Features
Enable control
Number of Outputs
1
Operating Temperature
-40℃~+105℃@(Ta)
Output Configuration
Positive
Output Current
2A
Output Type
Fixed
Output Voltage
500mV
Voltage - Supply
6V
Voltage Dropout
600mV@(2A)

Order codes

1

Pinout

9
The pins of the SC4215ASTRT
PinNameType
1NCUnspecified
2ENUnspecified
3VINUnspecified
4NCUnspecified
5NCUnspecified
6VOUnspecified
7FBUnspecified
8GNDUnspecified
9EPUnspecified

Open-source boards using it

All 8
  • 4 layersRicardoTemplate, the printed circuit board in 3D

    RicardoTemplate

    icl-rocketry/Ricardo-BoardTemplate

    The bare minimum needed for boards in the ricardo avionics ecosystem.

    76 parts1
  • 4 layersRaven main, the printed circuit board in 3D

    Raven main

    icl-rocketry/HARRIER

    Radiation experiment for payload 2026

    107 parts
  • 4 layers30 × 60 mmChad, the printed circuit board in 3D

    Chad

    icl-rocketry/Ricardo-Chad

    Former actuators control board, now a servo control board.

    130 partsMIT
  • 4 layers60.7 × 40 mmRicardo Crosshair, the printed circuit board in 3D

    Ricardo Crosshair

    icl-rocketry/Ricardo-Crosshair

    Reefing plastic fibre line cutter (recovery) board.

    169 parts
  • 4 layers43 × 65 mmRicardo Hermes, the printed circuit board in 3D

    Ricardo Hermes

    icl-rocketry/Ricardo-Hermes

    Radio gateway

    143 parts
  • 4 layersTyphoon, the printed circuit board in 3D

    Typhoon

    icl-rocketry/Ricardo-Typhoon

    Stepper Control Board

    97 parts
  • 4 layersTyphoon, the printed circuit board in 3D

    Typhoon

    kayvan-faghani/Ricardo_Typhoon_Temp

    Temporary Repo for Ricardo Cyclone

    16 parts
  • 4 layers81.2 × 84.7 mmPulse board, the printed circuit board in 3D

    Pulse board

    william-richards1/Pulse

    High current driver board for overdriving consumer LEDs.

    175 partsMIT

Questions

Is there a KiCad symbol and footprint for the SC4215ASTRT?

Yes. The symbol is EasyEDA_Cloud:SC4216HSETRT, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SC4215ASTRT?

SOIC-8-EP, with 9 pins.

Where is the SC4215ASTRT datasheet?

SEMTECH publishes it: the Datasheet link on this page opens it.

Where can I order the SC4215ASTRT?

JLCPCB lists it as part C353859, with 448 in stock; the sellers' links on this page open their listings.

What can replace the SC4215ASTRT?

Parts like it in the library: the NCP59763AMN050TB by onsemi and the SC4215HSETRT by SEMTECH. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SC4215ASTRT?

8 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

2