Skip to the content
123

BD50FC0FP-E2

ROHM SemiconductorExtended

-25℃~+85℃ 1 1A 26.5V 300mV@(500mA) 500uA 5V Fixed Over Current Protection、Over Temperature Protection Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
rohm/BD50FC0FP-E2
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-252
Pins
3
In stock
149 at JLCPCB (C920705)
Used on
5 open-source boards

Overview

The BD50FC0FP-E2 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by ROHM Semiconductor in a TO-252 package with 3 pins. -25℃~+85℃ 1 1A 26.5V 300mV@(500mA) 500uA 5V Fixed Over Current Protection、Over Temperature Protection Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:BD50FC0FP, from KiCad's library) and its footprint (Package_TO_SOT_SMD:TO-252-2, from KiCad's library), ready for a KiCad board. 149 are in stock at JLCPCB (part C920705). 5 open-source boards in 3 repositories on GitHub use it.

Symbol

1VCC2GND3VO
Regulator_Linear:BD50FC0FPFrom KiCad's library

Footprint

123
Package_TO_SOT_SMD:TO-252-2From KiCad's library

From the datasheet

12
Supply, most
26.5 V · Vcc, recommended operating max, VO≧3.0V · p. 8
Supply, absolute maximum
35 V · Vcc, absolute maximum · p. 8
Works from
-25 °C · Ta, operating ambient min · p. 8
Works up to
85 °C · Ta, operating ambient max · p. 8
Junction, hottest
150 °C · Tjmax, maximum junction temperature · p. 8
Takes working
500 µA · Vcc, typical circuit current, 13.5V, IO=0mA, Ta=25°C · p. 8
Gives
1 A · IO, maximum rated output current · p. 8
Output
5 V · VO, fixed nominal output · p. 1
Dropout
300 mV · typical minimum dropout, IO=500mA, Vcc=VO×0.95 · p. 8
Dropout
400 mV · typical minimum dropout, IO=500mA, Vcc=4.0V · p. 8
Junction to air (TO252-5 / TO252-3)
115.3 K/W · typical junction to ambient, 1s PCB · p. 9
Junction to air (TO252-5 / TO252-3)
20.8 K/W · typical junction to ambient, 2s2p PCB · p. 9

What it is and has

6
Output current capability
1A · p. 1
Output voltage accuracy
±1% at Ta=25°C · p. 1
Output stage
Low saturation with PDMOS output · p. 1
Protection
Over-current protection · p. 1
Protection
Thermal shutdown · p. 1
Output capacitor compatibility
Ceramic capacitor · p. 1

Around it

1
cap ≧1µF
between Vcc and GND; For VO≧5.0V; choose capacitance according to the supply wiring and application, with excellent voltage and temperature characteristics. · p. 30

Specifications

15
ParameterConditionsAs printedPage
Supply Voltage *1 VccTa=25°C; do not exceed Tjmaxmin -0.3 · max 35 V8
Operating Temperature Range Tamin -25 · max 85 ℃8
Storage Temperature Range Tstgmin -55 · max 150 ℃8
Maximum Junction Temperature Tjmaxmax 150 ℃8
Supply Voltage (VO≧3.0V) VccBD50FC0; minimum is VO+1 Vmax 26.5 V8
Startup Voltage (IO=0mA) VccIO=0mAmax 3.8 V8
Output Current IOmin 0 · max 1 A8
Circuit Current IccTa=25°C, Vcc=13.5V, IO=0mAtyp 0.5 · max 2.5 mA8
Minimum dropout voltage ∆VdTa=25°C, Vcc=4.0V, IO=500mA; footnote *5: Vo≧4.0Vtyp 0.4 · max 0.7 V8
Minimum dropout voltage (BD00/50/60/70/80/90/J0/J2/J5FC0) ∆VdBD50FC0; Ta=25°C, Vcc=VO×0.95, IO=500mAtyp 0.3 · max 0.5 V8
Line Regulation Reg.ITa=25°C, IO=0mA, Vcc=VO+1.0V→26.5Vtyp 20 · max 80 mV8
Junction to Ambient θJATO252-5 / TO252-3; 1s PCB; JESD51-2A still airtyp 115.3 °C/W9
Junction to Ambient θJATO252-5 / TO252-3; 2s2p PCB; JESD51-2A still airtyp 20.8 °C/W9
Junction to Top Characterization Parameter(Note 2) ΨJTTO252-5 / TO252-3; 1s PCBtyp 14 °C/W9
Junction to Top Characterization Parameter(Note 2) ΨJTTO252-5 / TO252-3; 2s2p PCBtyp 3 °C/W9

Pins, by the datasheet

4
1 Vcc
Power Supply Pin · p. 3
2 N.C. (Note 1)
No Connection; leave OPEN. · p. 3
3 Vo
Output Pin · p. 3
FIN GND
GND · p. 3

Open-source boards using it

5
  • 2 layers100 × 100 mmESPHome AIO, the printed circuit board in 3D

    ESPHome AIO

    Ian-Blockmans/ESPHhome-AIO

    An all in one ESPHome development board

    126 parts
  • 2 layers99.7 × 100 mmTeensy V4, the printed circuit board in 3D

    Teensy V4

    Gamu2124/RoboCupJunior2026-RobotDatas

    Complete data for the robot that won the Japan and World championships / 日本大会優勝 & 世界大会優勝したロボットの全データ

    40 parts1
  • 2 layers80 × 49 mmUI V1 WROOM, the printed circuit board in 3D

    UI V1 WROOM

    Gamu2124/RoboCupJunior2026-RobotDatas

    Complete data for the robot that won the Japan and World championships / 日本大会優勝 & 世界大会優勝したロボットの全データ

    51 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the BD50FC0FP-E2?

Yes. The symbol is Regulator_Linear:BD50FC0FP and the footprint Package_TO_SOT_SMD:TO-252-2, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the BD50FC0FP-E2?

TO-252, with 3 pins. Its footprint is drawn on this page.

Where is the BD50FC0FP-E2 datasheet?

ROHM Semiconductor publishes it: the Datasheet link on this page opens it.

Where can I order the BD50FC0FP-E2?

JLCPCB lists it as part C920705, with 149 in stock; the sellers' links on this page open their listings.

What can replace the BD50FC0FP-E2?

Parts like it in the library: the CJ7805 3% by Jiangsu Changjing Electronics Technology (CJ), the MC7805BDTRKG by onsemi, the CJ78D05 by Jiangsu Changjing Electronics Technology (CJ) and the AS7805ADTR-G1 by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BD50FC0FP-E2?

5 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.