Skip to the content
1234567891011121314151617181920

26LS31JC

Rochester Electronics, LLCExtended

-55℃~+125℃ 4.5V~5.5V RS-422 - Interface - Specialized ROHS

Part id
rochester-electronics-llc/26LS31JC
Category
Interface, Specialized
Pins
20
In stock
0 at JLCPCB (C3213571)
Used on
3 open-source boards

Overview

The 26LS31JC is an interface, Specialized made by Rochester Electronics, LLC with 20 pins. -55℃~+125℃ 4.5V~5.5V RS-422 - Interface - Specialized ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:26LS31JC, from EasyEDA) and its footprint (EasyEDA_Cloud:LCC-20_L9.0-W9.0-P1.27-T, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C3213571). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1NC2INPUTA3OUTA+4OUTA-5ENABLE6NC7OUTB-8OUTB+9OUTB10GND11NC12INPUTC13OUTC+14OUTC-15ENABLE#16NC17OUTD-18OUTD+19INPUTD20VCC
EasyEDA_Cloud:26LS31JCFrom EasyEDA

Footprint

1234567891011121314151617181920
EasyEDA_Cloud:LCC-20_L9.0-W9.0-P1.27-TFrom EasyEDA

Pinout

20
The pins of the 26LS31JC
PinNameType
1NCUnspecified
2INPUTAUnspecified
3OUTA+Unspecified
4OUTA-Unspecified
5ENABLEUnspecified
6NCUnspecified
7OUTB-Unspecified
8OUTB+Unspecified
9OUTBUnspecified
10GNDUnspecified
11NCUnspecified
12INPUTCUnspecified
13OUTC+Unspecified
14OUTC-Unspecified
15ENABLE#Unspecified
16NCUnspecified
17OUTD-Unspecified
18OUTD+Unspecified
19INPUTDUnspecified
20VCCUnspecified

Open-source boards using it

3
  • 2 layers138 × 96.9 mmISA Card, the printed circuit board in 3D

    ISA Card

    AkBKukU/CM153-Repro

    A reproduction of the Philips CM-153 LMSI controller

    161 parts145
  • 2 layers69.9 × 40.6 mmStep dir controller 3x2, the printed circuit board in 3D

    Step dir controller 3x2

    janelia-kicad/step_dir_controller_3x2

    This device outputs three independent sets of differential step and direction signals to control motion of actuators using step and direction drivers.

    23 parts
  • 2 layers190.6 × 172.4 mmNorthstar HD-5, the printed circuit board in 3D

    Northstar HD-5

    abzman/Northstar-Advantage-Cards

    156 parts4Unlicense

Parts like it

2

Questions

Is there a KiCad symbol and footprint for the 26LS31JC?

Yes. The symbol is EasyEDA_Cloud:26LS31JC and the footprint EasyEDA_Cloud:LCC-20_L9.0-W9.0-P1.27-T, both drawn on this page. PCBKit places them on a board for you when you design with it.

Where is the 26LS31JC datasheet?

Rochester Electronics, LLC publishes it: the Datasheet link on this page opens it.

Where can I order the 26LS31JC?

JLCPCB lists it as part C3213571, with 0 in stock; the sellers' links on this page open their listings.

What can replace the 26LS31JC?

Parts like it in the library: the 5962-87547012A by Texas Instruments and the SN75ALS053FN by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 26LS31JC?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.