RP2354B
RASPBERRY
Dual Arm Cortex-M33 or dual Hazard3 RISC-V processors @ 150MHz 520 KB on-chip SRAM GPIO48 , 8 Analogue Inputs, 2 MB Internal Flash
- Part id
- raspberry/RP2354B
- Category
- Uncategorised
- Package
- QFN80
- Pins
- 81
Overview
The RP2354B is an uncategorised made by RASPBERRY in a QFN80 package with 81 pins. Dual Arm Cortex-M33 or dual Hazard3 RISC-V processors @ 150MHz 520 KB on-chip SRAM GPIO48 , 8 Analogue Inputs, 2 MB Internal Flash.
PCBKit's library has its KiCad symbol (MCU_RaspberryPi:RP2354B, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-80-1EP_10x10mm_P0.4mm_EP3.4x3.4mm, from KiCad's library), ready for a KiCad board.
Symbol
Footprint
Pinout
81| Pin | Name | Type |
|---|---|---|
| 1 | GPIO4 | Input/output |
| 2 | GPIO5 | Input/output |
| 3 | GPIO6 | Input/output |
| 4 | GPIO7 | Input/output |
| 5 | IOVDD | Power in |
| 6 | GPIO8 | Input/output |
| 7 | GPIO9 | Input/output |
| 8 | GPIO10 | Input/output |
| 9 | GPIO11 | Input/output |
| 10 | DVDD | Power in |
| 11 | GPIO12 | Input/output |
| 12 | GPIO13 | Input/output |
| 13 | GPIO14 | Input/output |
| 14 | GPIO15 | Input/output |
| 15 | IOVDD | Passive |
| 16 | GPIO16 | Input/output |
| 17 | GPIO17 | Input/output |
| 18 | GPIO18 | Input/output |
| 19 | GPIO19 | Input/output |
| 20 | GPIO20 | Input/output |
| 21 | GPIO21 | Input/output |
| 22 | GPIO22 | Input/output |
| 23 | GPIO23 | Input/output |
| 24 | IOVDD | Passive |
| 25 | GPIO24 | Input/output |
| 26 | GPIO25 | Input/output |
| 27 | GPIO26 | Input/output |
| 28 | GPIO27 | Input/output |
| 29 | IOVDD | Passive |
| 30 | XIN | Input |
| 31 | XOUT | Output |
| 32 | DVDD | Passive |
| 33 | SWCLK | Input |
| 34 | SWDIO | Input/output |
| 35 | RUN | Input |
| 36 | GPIO28 | Input/output |
| 37 | GPIO29 | Input/output |
| 38 | GPIO30 | Input/output |
| 39 | GPIO31 | Input/output |
| 40 | GPIO32 | Input/output |
| 41 | IOVDD | Passive |
| 42 | GPIO33 | Input/output |
| 43 | GPIO34 | Input/output |
| 44 | GPIO35 | Input/output |
| 45 | GPIO36 | Input/output |
| 46 | GPIO37 | Input/output |
| 47 | GPIO38 | Input/output |
| 48 | GPIO39 | Input/output |
| 49 | GPIO40/ADC0 | Input/output |
| 50 | IOVDD | Passive |
| 51 | DVDD | Passive |
| 52 | GPIO41/ADC1 | Input/output |
| 53 | GPIO42/ADC2 | Input/output |
| 54 | GPIO43/ADC3 | Input/output |
| 55 | GPIO44/ADC4 | Input/output |
| 56 | GPIO45/ADC5 | Input/output |
| 57 | GPIO46/ADC6 | Input/output |
| 58 | GPIO47/ADC7 | Input/output |
| 59 | ADC_AVDD | Power in |
| 60 | IOVDD | Passive |
| 61 | VREG_AVDD | Power in |
| 62 | VREG_PGND | Power in |
| 63 | VREG_LX | Power out |
| 64 | VREG_VIN | Power in |
| 65 | VREG_FB | Passive |
| 66 | USB_DM | Input/output |
| 67 | USB_DP | Input/output |
| 68 | USB_OTP_VDD | Power in |
| 69 | QSPI_IOVDD | Power in |
| 70 | QSPI_SD3 | Input/output |
| 71 | QSPI_SCLK | Output |
| 72 | QSPI_SD0 | Input/output |
| 73 | QSPI_SD2 | Input/output |
| 74 | QSPI_SD1 | Input/output |
| 75 | QSPI_SS | Output |
| 76 | IOVDD | Passive |
| 77 | GPIO0 | Input/output |
| 78 | GPIO1 | Input/output |
| 79 | GPIO2 | Input/output |
| 80 | GPIO3 | Input/output |
| 81 | GND | Power in |
Parts like it
1Questions
Is there a KiCad symbol and footprint for the RP2354B?
Yes. The symbol is MCU_RaspberryPi:RP2354B and the footprint Package_DFN_QFN:QFN-80-1EP_10x10mm_P0.4mm_EP3.4x3.4mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the RP2354B?
QFN80, with 81 pins. Its footprint is drawn on this page.
What can replace the RP2354B?
Parts like it in the library: the RP2350B by RASPBERRY. Check their datasheets: a part that fits the footprint may still differ in its ratings.