RP2350A
RASPBERRY
Dual Arm Cortex-M33 or dual Hazard3 RISC-V processors @ 150MHz 520 KB on-chip SRAM GPIO30, 4 Analogue Inputs
- Part id
- raspberry/RP2350A
- Category
- Uncategorised
- Package
- QFN60
- Pins
- 61
Overview
The RP2350A is an uncategorised made by RASPBERRY in a QFN60 package with 61 pins. Dual Arm Cortex-M33 or dual Hazard3 RISC-V processors @ 150MHz 520 KB on-chip SRAM GPIO30, 4 Analogue Inputs.
PCBKit's library has its KiCad symbol (MCU_RaspberryPi:RP2350A, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm, from KiCad's library), ready for a KiCad board.
Symbol
Footprint
Pinout
61| Pin | Name | Type |
|---|---|---|
| 1 | IOVDD | Power in |
| 2 | GPIO0 | Input/output |
| 3 | GPIO1 | Input/output |
| 4 | GPIO2 | Input/output |
| 5 | GPIO3 | Input/output |
| 6 | DVDD | Power in |
| 7 | GPIO4 | Input/output |
| 8 | GPIO5 | Input/output |
| 9 | GPIO6 | Input/output |
| 10 | GPIO7 | Input/output |
| 11 | IOVDD | Passive |
| 12 | GPIO8 | Input/output |
| 13 | GPIO9 | Input/output |
| 14 | GPIO10 | Input/output |
| 15 | GPIO11 | Input/output |
| 16 | GPIO12 | Input/output |
| 17 | GPIO13 | Input/output |
| 18 | GPIO14 | Input/output |
| 19 | GPIO15 | Input/output |
| 20 | IOVDD | Passive |
| 21 | XIN | Input |
| 22 | XOUT | Output |
| 23 | DVDD | Passive |
| 24 | SWCLK | Input |
| 25 | SWDIO | Input/output |
| 26 | RUN | Input |
| 27 | GPIO16 | Input/output |
| 28 | GPIO17 | Input/output |
| 29 | GPIO18 | Input/output |
| 30 | IOVDD | Passive |
| 31 | GPIO19 | Input/output |
| 32 | GPIO20 | Input/output |
| 33 | GPIO21 | Input/output |
| 34 | GPIO22 | Input/output |
| 35 | GPIO23 | Input/output |
| 36 | GPIO24 | Input/output |
| 37 | GPIO25 | Input/output |
| 38 | IOVDD | Passive |
| 39 | DVDD | Passive |
| 40 | GPIO26/ADC0 | Input/output |
| 41 | GPIO27/ADC1 | Input/output |
| 42 | GPIO28/ADC2 | Input/output |
| 43 | GPIO29/ADC3 | Input/output |
| 44 | ADC_AVDD | Power in |
| 45 | IOVDD | Passive |
| 46 | VREG_AVDD | Power in |
| 47 | VREG_PGND | Power in |
| 48 | VREG_LX | Power out |
| 49 | VREG_VIN | Power in |
| 50 | VREG_FB | Passive |
| 51 | USB_DM | Input/output |
| 52 | USB_DP | Input/output |
| 53 | USB_OTP_VDD | Power in |
| 54 | QSPI_IOVDD | Power in |
| 55 | QSPI_SD3 | Input/output |
| 56 | QSPI_SCLK | Output |
| 57 | QSPI_SD0 | Input/output |
| 58 | QSPI_SD2 | Input/output |
| 59 | QSPI_SD1 | Input/output |
| 60 | QSPI_SS | Output |
| 61 | GND | Power in |
Parts like it
1Questions
Is there a KiCad symbol and footprint for the RP2350A?
Yes. The symbol is MCU_RaspberryPi:RP2350A and the footprint Package_DFN_QFN:QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the RP2350A?
QFN60, with 61 pins. Its footprint is drawn on this page.
What can replace the RP2350A?
Parts like it in the library: the RP2354A by RASPBERRY. Check their datasheets: a part that fits the footprint may still differ in its ratings.