Overview
The EOS3FF512-WRN42 is an uncategorised made by QuickLogic with 42 pins.
PCBKit's library has its KiCad symbol (EOS-S3:EOS-S3, from Antmicro) and its footprint (wlcsp-42-2-65x2-42mm-layout7x6-p0-35mm:WLCSP-42_2.65x2.42mm_Layout7x6_P0.35mm, from Antmicro), ready for a KiCad board.
Symbol
Footprint
Pinout
42| Pin | Name | Type |
|---|---|---|
| A1 | XTAL_I | Input |
| A2 | VDD1 | Input |
| A3 | VDD2 | Input |
| A4 | FBIO_14/SW_DP_CLK | Input |
| A5 | FBIO_9 | Input |
| A6 | FBIO_6/FCLK | Input |
| A7 | SCL_0 | Input |
| B1 | XTAL_O | Input |
| B2 | ADC0 | Input |
| B3 | LDO_VIN | Input |
| B4 | FBIO_15/SW_DP_IO | Input |
| B5 | FBIO_10 | Input |
| B6 | FBIO_8 | Input |
| B7 | SDA_0 | Input |
| C1 | FBIO_19/SPI_SLAVE_MOSI | Input |
| C2 | AVDD | Input |
| C3 | AGND | Input |
| C4 | GND | Input |
| C5 | GND | Passive |
| C6 | VCCIOA | Input |
| C7 | FBIO3/SENSOR_INT_0 | Input |
| D1 | FBIO_17/SPI_SLAVE_MISO | Input |
| D2 | FBIO_24 | Input |
| D3 | FBIO_25 | Input |
| D4 | STM | Input |
| D5 | FBIO_34/SPI_MASTER_CLK | Input |
| D6 | VCCIOB | Input |
| D7 | FBIO_43/AP_INTERRUPT | Input |
| E1 | FBIO_16/SPI_SLAVE_CLK | Input |
| E2 | FBIO_23 | Input |
| E3 | FBIO_29 | Input |
| E4 | FBIO_31 | Input |
| E5 | FSOURCE | Input |
| E6 | FBIO_38/SPI_MASTER_MOSI | Input |
| E7 | FBIO_44/SW_DP_IO | Input |
| F1 | SYS_RSTn | Input |
| F2 | FBIO_20/SPI_SLAVE_SSn | Input |
| F3 | FBIO_28 | Input |
| F4 | FBIO_30 | Input |
| F5 | FBIO_36/SPI_MASTER_MISO | Input |
| F6 | FBIO_39/SPI_MASTER_SSn1 | Input |
| F7 | FBIO_45/SW_DP_CLK | Input |
Questions
Is there a KiCad symbol and footprint for the EOS3FF512-WRN42?
Yes. The symbol is EOS-S3:EOS-S3 and the footprint wlcsp-42-2-65x2-42mm-layout7x6-p0-35mm:WLCSP-42_2.65x2.42mm_Layout7x6_P0.35mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
Where is the EOS3FF512-WRN42 datasheet?
QuickLogic publishes it: the Datasheet link on this page opens it.