Skip to the content

L76L-M33

QuectelExtended

-165dBm -40℃~+85℃ 2.8V~4.3V SMD-18P GNSS Modules ROHS

Part id
quectel/L76L-M33
Category
GNSS Modules
Package
SMD-18P
Pins
18
In stock
682 at JLCPCB (C2916232)
Used on
5 open-source boards

Overview

The L76L-M33 is a GNSS Module made by Quectel in a SMD-18P package with 18 pins. -165dBm -40℃~+85℃ 2.8V~4.3V SMD-18P GNSS Modules ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:L76L-M33, from EasyEDA) and its footprint (EasyEDA_Cloud:COMM-SMD_18P-L10.1-W9.7-P1.1-TL_L76-LB, from EasyEDA), ready for a KiCad board. 682 are in stock at JLCPCB (part C2916232). 5 open-source boards in 4 repositories on GitHub use it.

Symbol

1GND2TXD3RXD41PPS5STANDBY6V_BCKP7NC8VCC9RESET_N10GND11RF_IN12GND13ANTON14VDD_RF15NC16RESERVED/I2C_SDA17RESERVED/I2C_SCL18WAKEUP
EasyEDA_Cloud:L76L-M33From EasyEDA

Footprint

EasyEDA_Cloud:COMM-SMD_18P-L10.1-W9.7-P1.1-TL_L76-LBFrom EasyEDA

From the datasheet

7
Supply, least
2.8 V · 供电范围, recommended operating min · p. 2
Supply, most
4.3 V · 供电范围, recommended operating max · p. 2
Works from
-40 °C · Operating temperature min · p. 2
Works up to
85 °C · Operating temperature max · p. 2
Takes working
31 mA · Normal tracking, GPS + GLONASS, 3.3 V · p. 2
Takes asleep
8 µA · Backup mode, 3.3 V · p. 2
Takes asleep
500 µA · Standby mode, 3.3 V · p. 2

What it is and has

14
GNSS constellations
GPS, GLONASS or BeiDou, Galileo, QZSS · p. 1
Channels
33 tracking, 99 acquisition, 210 PRN · p. 1
LNA
Built in · p. 1
Interfaces
UART and I2C; I2C requires specific software versions · p. 1
Timing
PPS and NMEA synchronization · p. 1
Orbit prediction
EASY™ self-generated orbit prediction · p. 1
Interference cancellation
Multi-frequency active interference cancellation · p. 1
Dimensions
10.1 mm × 9.7 mm × 2.5 mm · p. 2
Weight
Approximately 0.6 g · p. 2
Default constellations
GPS + GLONASS · p. 2
SBAS
WAAS, EGNOS, MSAS, GAGAN · p. 2
Protocols
NMEA 0183, PMTK, PQ · p. 2
Antenna
Active or passive · p. 2
Antenna supply
External supply or module VCC_RF pin · p. 2

Specifications

36
ParameterConditionsAs printedPage
工作温度L76-Lmin -40 · max 85 °C2
存储温度L76-Lmin -40 · max 90 °C2
接收频段L76-L; GPS L1 C/Atyp 1575.42 MHz2
接收频段L76-L; GLONASS L1typ 1602.5625 MHz2
接收频段L76-L; BeiDou B1Ityp 1561.098 MHz2
接收频段L76-L; Galileo E1typ 1575.42 MHz2
并发接收星系数量L76-Ltyp 32
通道数L76-L; 跟踪typ 33 个2
通道数L76-L; 捕获typ 99 个2
通道数L76-L; PRNtyp 210 个2
水平定位精度①L76-L; < 2.5 m CEP(自主定位); GPS + GLONASS, room temperature, -130 dBmmax 2.5 m2
速度精度①L76-L; < 0.1 m/s(无辅助); GPS + GLONASS, room temperature, -130 dBmmax 0.1 m/s2
加速度精度①L76-L; < 0.1 m/s²(无辅助); GPS + GLONASS, room temperature, -130 dBmmax 0.1 m/s²2
授时精度L76-L; 1PPS < 100 nsmax 100 ns2
TTFF @ -130 dBmL76-L; EASY™ 开启; 冷启动; < 15 smax 15 s2
TTFF @ -130 dBmL76-L; EASY™ 开启; 温启动; < 5 smax 5 s2
TTFF @ -130 dBmL76-L; EASY™ 开启; 热启动; < 2 smax 2 s2
TTFF @ -130 dBm①L76-L; EASY™ 关闭; 冷启动; < 32 s; GPS + GLONASS, room temperaturemax 32 s2
TTFF @ -130 dBm①L76-L; EASY™ 关闭; 温启动; < 30 s; GPS + GLONASS, room temperaturemax 30 s2
TTFF @ -130 dBm①L76-L; EASY™ 关闭; 热启动; < 2 s; GPS + GLONASS, room temperaturemax 2 s2
灵敏度③L76-L; 捕获; room temperature, simulatortyp -149 dBm2
灵敏度③L76-L; 跟踪; room temperature, simulatortyp -167 dBm2
灵敏度③L76-L; 重捕获; room temperature, simulatortyp -161 dBm2
动态性能①L76-L; 最高海拔; GPS + GLONASS, room temperature, -130 dBmmax 10000 m2
动态性能①L76-L; 最大速率; GPS + GLONASS, room temperature, -130 dBmmax 515 m/s2
动态性能①L76-L; 最大加速度; GPS + GLONASS, room temperature, -130 dBmmax 4 g2
I2C 接口 ②L76-L; only specific software versions support I2Cmax 400 kbps2
UART 接口L76-L; 波特率min 9600 · max 921600 bps2
UART 接口L76-L; default baud ratetyp 9600 bps2
UART 接口L76-L; 更新频率; typical field represents defaulttyp 1 · max 10 Hz2
供电范围L76-Lmin 2.8 · typ 3.3 · max 4.3 V2
I/O 电压L76-Lmin 2.7 · typ 2.8 · max 2.9 V2
耗流(@ 3.3 V)L76-L; 常规模式; 捕获(GPS + GLONASS); value not explicitly classified as min, typical or maxtyp 31 mA2
耗流(@ 3.3 V)L76-L; 常规模式; 跟踪(GPS + GLONASS); value not explicitly classified as min, typical or maxtyp 31 mA2
耗流(@ 3.3 V)L76-L; 省电模式; Backup 模式; value not explicitly classified as min, typical or maxtyp 8 uA2
耗流(@ 3.3 V)L76-L; 省电模式; Standby 模式; value not explicitly classified as min, typical or maxtyp 0.5 mA2

Open-source boards using it

5
  • 4 layers80.5 × 50 mmBwlc1a, the printed circuit board in 3D

    Bwlc1a

    teapotlaboratories/bwlc1a

    Low-power Cellular GPS Tracker

    178 parts2MIT
  • 4 layers90.4 × 25 mmTransponder-12.0.1, the printed circuit board in 3D

    Transponder-12.0.1

    rolandvs/ais_transponder

    A real, functioning low-power AIS transponder (class B)

    115 parts1GPL-3.0
  • 4 layers61.6 × 95.8 mmIn car dashboard, the printed circuit board in 3D

    In car dashboard

    andreiii04/in-car-dashboard

    Custom STM32 in-car telemetry display: G-meter, GPS speed and cabin weather on a 2.8" TFT, with each drive logged to SD.

    51 partsMIT
  • 4 layers76 × 29.9 mmGnss node, the printed circuit board in 3D

    Gnss node

    bartkepl/CanGnssNode

    Polowy węzeł pozycyjny z modułem GNSS Quectel L76-L (GPS/GLONASS/Galileo/QZSS) i czujnikiem orientacji (akcelerometr + magnetometr), komunikujący się cyfrowo przez CAN 2.0B.

    141 partsMIT
  • 4 layers84 × 25 mmTransponder-11.9.1, the printed circuit board in 3D

    Transponder-11.9.1

    rolandvs/ais_transponder

    A real, functioning low-power AIS transponder (class B)

    109 parts1GPL-3.0

Parts like it

4

Questions

Is there a KiCad symbol and footprint for the L76L-M33?

Yes. The symbol is EasyEDA_Cloud:L76L-M33 and the footprint EasyEDA_Cloud:COMM-SMD_18P-L10.1-W9.7-P1.1-TL_L76-LB, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the L76L-M33?

SMD-18P, with 18 pins. Its footprint is drawn on this page.

Where is the L76L-M33 datasheet?

Quectel publishes it: the Datasheet link on this page opens it.

Where can I order the L76L-M33?

JLCPCB lists it as part C2916232, with 682 in stock; the sellers' links on this page open their listings.

What can replace the L76L-M33?

Parts like it in the library: the ATGM336H-6N-74 by ZHONGKEWEI, the ATGM336H-6N-22 by ZHONGKEWEI, the ATGM336H-7N-22 by ZHONGKEWEI and the ATGM336H-7N76 by ZHONGKEWEI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the L76L-M33?

5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.