Skip to the content
12345678910

TQ2SA-5V

PanasonicExtended

-40℃~+85℃ 125V@AC、220V@DC 140mW 178Ω 2A 4ms 4ms 500mA@125VAC、1A@30VDC 50mΩ 5V AgNi + Gold plated Two groups of conversions: 2C(Double-pole double-throw conversion) SMD,14x9mm Signal Relays ROHS

Part id
panasonic/TQ2SA-5V
Category
Signal Relays
Package
SMD,14x9mm
Pins
10
In stock
1,655 at JLCPCB (C2858038)
Used on
6 open-source boards

Overview

The TQ2SA-5V is a signal Relay made by Panasonic in a SMD,14x9mm package with 10 pins. -40℃~+85℃ 125V@AC、220V@DC 140mW 178Ω 2A 4ms 4ms 500mA@125VAC、1A@30VDC 50mΩ 5V AgNi + Gold plated Two groups of conversions: 2C(Double-pole double-throw conversion) SMD,14x9mm Signal Relays ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TQ2SA-5V_C2858038, from EasyEDA) and its footprint (Relays:REL_PANASONIC_TQ2SA, from CERN's library), ready for a KiCad board. 1,655 are in stock at JLCPCB (part C2858038). 6 open-source boards in 6 repositories on GitHub use it.

Symbol

10987654321
EasyEDA_Cloud:TQ2SA-5V_C2858038From EasyEDA

Footprint

12345678910
Relays:REL_PANASONIC_TQ2SAFrom CERN's library

Pinout

10
The pins of the TQ2SA-5V
PinNameType
11Unspecified
22Unspecified
33Unspecified
44Unspecified
55Unspecified
66Unspecified
77Unspecified
88Unspecified
99Unspecified
1010Unspecified

Open-source boards using it

6
  • 2 layers120.4 × 100.4 mmRelaymux, the printed circuit board in 3D

    Relaymux

    PetteriAimonen/relaymux

    Hardware and firmware for a USB connected relay box

    59 parts18BSD-2-Clause
  • 2 layers81.1 × 45.3 mmLC meter, the printed circuit board in 3D

    LC meter

    PA2ER/LC-meter

    induction and capacity meter with pic controller.

    43 parts3
  • 2 layers91 × 87 mmHarmonic jerkulator, the printed circuit board in 3D

    Harmonic jerkulator

    Randagodron/harmonic-jerkulator

    Fuzz stompbox for electric guitar

    45 parts1
  • 2 layers50 × 50 mmAdapter relay, the printed circuit board in 3D

    Adapter relay

    rtyle/ping4pow

    Monitor (ping) network resources as a condition for powering a connected device.

    22 parts1GPL-3.0
  • 4 layers160 × 100 mmETH1CJTAG, the printed circuit board in 3D

    ETH1CJTAG

    BehrensG/ETH1CJTAG

    Low cost JTAG

    478 partsGPL-3.0
  • 6 layers160 × 100 mmETH1CLCR2, the printed circuit board in 3D

    ETH1CLCR2

    BehrensG/ETH1CLCR2

    ETH1CLCR2 LCR measurement card with Ethernet interface.

    604 parts

Questions

Is there a KiCad symbol and footprint for the TQ2SA-5V?

Yes. The symbol is EasyEDA_Cloud:TQ2SA-5V_C2858038 and the footprint Relays:REL_PANASONIC_TQ2SA, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TQ2SA-5V?

SMD,14x9mm, with 10 pins. Its footprint is drawn on this page.

Where is the TQ2SA-5V datasheet?

Panasonic publishes it: the Datasheet link on this page opens it.

Where can I order the TQ2SA-5V?

JLCPCB lists it as part C2858038, with 1,655 in stock; the sellers' links on this page open their listings.

Which open-source boards use the TQ2SA-5V?

6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.